Publications related to Impact of axions on confinement in three and two dimensions

Related publications (29)

3D Characterisation of Turbulent Plasma Filaments Using Gas Puff Imaging in the Tokamak à Configuration Variable

A key challenge for the development of fusion reactors based on magnetic confinement, such as tokamaks and stellarators, is the control of the turbulent processes. The most prominent feature of turbulence in the Scrape-Off Layer (SOL), the volume between t ...

EPFL2023

Nonlinear dynamics and Kerr frequency comb formation in lattices of coupled microresonators

Tobias Kippenberg, Alexey Tikan, Aleksandr Tusnin

Recently, substantial progress has been made in the understanding of microresonators frequency combs based on dissipative Kerr solitons (DKSs). However, most of the studies have focused on the single-resonator level. Coupled resonator systems can open new ...

Nature Portfolio2023

Continuous monitoring of morphological changes from sediment augmentation by field measurements and flume experiments

Giovanni De Cesare, Christian Mörtl

In this study, we present results from continuous field monitoring and a flume ex-periment of a sediment augmentation measure in a residual flow reach of the Swiss midlands. A straight morphological channel with fixed bed material was constructed to repres ...

2023

Emergent U(1) symmetry in non-particle-conserving one-dimensional models

Mohamed Zakaria Jouini, Frédéric Mila, Natalia Chepiga, Loïc Jean Pierre Herviou

The properties of stable Luttinger liquid phases in models with a nonconserved number of particles are investigated. We study the Luttinger liquid phases in one-dimensional models of hard-core boson and spinless fermion chains where particles can be create ...

Amer Physical Soc2023

How Words Move Hearts: Interpretable Machine Learning Models of Bias, Engagement, and Influence in Socio-Political Systems

Aswin Suresh

We study socio-political systems in representative democracies. Motivated by problems that affect the proper functioning of the system, we build computational methods to answer research questions regarding the phenomena occurring in them. For each phenomen ...

EPFL2023

A simplified modeling method for multi-particle damper: Validation and application in energy dissipation analysis

Qianqing Wang

Particle dampers have received considerable attention in recent years as a novel damping technique. However, due to its high degree of nonlinearity, no mature damping model has been constructed. This article proposes an equivalent raft model that takes int ...

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD2022

A new insight into the dynamic impact between geophysical flow and rigid barrier

Xingyue Li

Understanding the interaction between complicated geophysical flows and barriers remains a critical challenge for hazards countermeasures in engineering design. In this study, the impact of geophysical flows on a rigid barrier is studied numerically using ...

ELSEVIER SCI LTD2022

Bragg edge tomography characterization of additively manufactured 316L steel

Roland Logé, Christian Leinenbach, Nikola Kalentics

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Combining hypothesis- and data-driven neuroscience modeling in FAIR workflows

Daniel Keller

Modeling in neuroscience occurs at the intersection of different points of view and approaches. Typically, hypothesis-driven modeling brings a question into focus so that a model is constructed to investigate a specific hypothesis about how the system work ...

2022

Fast 3D Modeling of Prosthetic Robotic Hands Based on a Multi-Layer Deformable Design

Daniel Thalmann

Current research of designing prosthetic robotic hands mainly focuses on improving their functionality by devising new mechanical structures and actuation systems. Most of existing work relies on a single structure/system (e.g., bone-only or tissue-only) a ...

WHIOCE PUBLISHING PTE LTD, SINGAPORE2022

Wind-Topo_Model

Michael Lehning, Jérôme François Sylvain Dujardin

Model and Data: Dujardin, J.; Lehning, M. Wind-Topo_model. EnviDat 2022 ...

Zenodo2022

Turbulent transport regimes in the tokamak boundary

Maurizio Giacomin

The overall performance of a tokamak strongly depends on phenomena that take place in a thin region between the main plasma and the vessel wall, which is denoted as tokamak boundary. In fact, the formation of transport barriers in this region can significa ...

EPFL2022

Neural-network quantum states for periodic systems in continuous space

Giuseppe Carleo, Gabriel Maria Pescia

We introduce a family of neural quantum states for the simulation of strongly interacting systems in the presence of spatial periodicity. Our variational state is parametrized in terms of a permutationally invariant part described by the Deep Sets neural-n ...

AMER PHYSICAL SOC2022

Atomic layer deposition of Ni and Ni80Fe20 for tubular spin-wave nanocavities

Maria Carmen Giordano

Magnetic thin films and magnetic nanostructures have become essential components of modern technological applications. Modern branches of magnetisms focus on spin-charge coupling (spintronics) and the collective excitation of spin waves in magnetically ord ...

EPFL2021

Method and system for generating a three-dimensional model based on spherical photogrammetry

Frédéric Kaplan, Pierre-André Mudry, Nils Hamel, Albane Bénédicte Descombes

A computer-implemented method is proposed for creating a three-dimensional model of the environment. The method comprises the steps of planning (105) a trajectory for a moving system carrying an omnidirectional camera comprising a first image sensor facing ...

2021

Analysis of volumetric mass transfer coefficient (k(L)a) in small- (250 mL) to large-scale (2500 L) orbitally shaken bioreactors

Florian Maria Wurm, David Hacker

In this study, the combination of dimensional analysis (DA) and analysis of variance (ANOVA) was used to predict the volumetric mass transfer coefficient (k(L)a) values under different operating conditions for orbitally shaken bioreactors (OSRs) with diffe ...

SPRINGER HEIDELBERG2020

Grayscale e-beam lithography: Effects of a delayed development for well-controlled 3D patterning

Henning Paul-Julius Stahlberg

Grayscale electron beam lithography (g-EBL) is a fabrication technique that allows for tunable control of resist topography. In most cases, the height of the structures is in the submicron regime. Here, we present an extensive experimental characterization ...

2020

Shaping effects on scrape-off layer plasma turbulence: A rigorous validation of three-dimensional simulations against TCV measurements

Paolo Ricci, Cedric Kar-Wai Tsui, Fabio Riva

The effect of plasma shaping on scrape-off layer (SOL) plasma turbulence is investigated through a rigorous validation exercise. Two- and three-dimensional simulations of the SOL plasma dynamics in three TCV limited discharges are carried out with the GBS ...

American Institute of Physics (AIP)2020

Isotope dependence of energy, momentum and particle confinement in tokamaks

Henri Weisen, Yann Camenen, Javier García Hernández, Michele Marin

The isotope dependence of plasma transport will have a significant impact on the performance of future D-T experiments in JET and ITER and eventually on the fusion gain and economics of future reactors. In preparation for future D-T operation on JET, dedic ...

Cambridge University Press2020

Influence of the inlet velocity profile on the flow stability in a symmetric channel expansion

François Gallaire, Lorenzo Siconolfi

In a channel flow with a sudden expansion, whether for three-dimensional (3-D) pipe and channel flows, or for two-dimensional (2-D) channel flow, it is known that increasing the Reynolds number beyond a critical value induces a symmetry breaking Pitchfork ...

Cambridge University Press2020