Home

Publication

Thermal-hydraulic analysis of the upgraded EU-DEMO CS1 coil

About
Privacy
Disclaimer

Graph Chatbot

Related publications (34)

Page 1 of 2

A distributed real-time diagnostic and control network for the TCV tokamak based on the Data Distribution Service

Roberto Masocco, Cristian Galperti, Alessandro Tenaglia

A novel communication network is being implemented on the machines composing the Système de Contrôle Distribué (SCD) that form the real-time architecture of the Tokamak à Configuration Variable (TCV), exploiting the capabilities of the Data Distribution Se ...

2025

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Rainer Wesche, Roberto Guarino

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Sophie Danielle Angelica Gorno

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

EPFL2024

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Stefano Coda, Jeffrey Huang

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

IOP Publishing Ltd2024

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Error field detection and correction studies towards ITER operation

Olivier Sauter

In magnetic fusion devices, error field (EF) sources, spurious magnetic field perturbations, need to be identified and corrected for safe and stable (disruption-free) tokamak operation. Within Work Package Tokamak Exploitation RT04, a series of studies hav ...

IOP Publishing Ltd2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Models implemented in the methodological approach to design the initial STEP first wall contour

Kevin Henricus Annemarie Verhaegh, Davide Galassi, Filippo Bagnato, Dario Vaccaro

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is mana ...

Elsevier Science Sa2024

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background

Moahan Murugappan

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

EPFL2024

Demonstration of a sparse sensor placement technique to the limited diagnostic set in a fusion power plant

Artur Perek, Lorenzo Martinelli

DEMO will have a limited diagnostic set for optimization of reactor performance, and limited diagnostic coverage due to challenging reactor conditions. This poses challenges for control, especially for detachment control which is planned to be performed wi ...

Elsevier Science Sa2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Tangentially viewing phase contrast imaging for turbulence measurements in toroidal fusion devices

Stefano Coda

Phase contrast imaging (PCI) is an established and powerful technique for measuring density fluctuations in plasmas and has been successfully applied to several fusion devices. Rooted in a concept first developed for microscopy, PCI belongs to the category ...

2024

Observation of magnetic islands in tokamak plasmas during the suppression of edge-localized modes

Olivier Sauter, Stefano Coda, Basil Duval, Timothy Goodman, Benoît Labit, Laurie Porte, Federico Alberto Alfredo Felici, Antoine Pierre Emmanuel Alexis Merle, Umar Sheikh, Alessandro Pau, Mengdi Kong, Cristian Sommariva

In tokamaks, a leading platform for fusion energy, periodic filamentary plasma eruptions known as edge-localized modes occur in plasmas with high-energy confinement and steep pressure profiles at the plasma edge. These edge-localized modes could damage the ...

2024

Innovative dud detection based on JET DT experience

Olivier Sauter, Alessandro Pau

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

DTT toroidal field conductor samples test in Sultan: DC and AC characterization

Kamil Sedlák, Mattia Ortino, Hugues Marie Alain Bajas

The superconducting magnet system of the Divertor Tokamak Test (DTT) facility, composed of 18 toroidal field (TF) coils, 6 poloidal field coils and a central solenoid, has been designed and many procurements have been launched. Some manufacturing aspects a ...

Iop Publishing Ltd2024

Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives

Damien Fasel

The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requiremen ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Analytical Computation of the Sensitivity Coefficients in Hybrid AC/DC Networks

Mario Paolone, Willem Lambrichts

In this paper, we present a model for the analytical computation of the power flow sensitivity coefficients (SCs) for hybrid AC/DC networks. The SCs are defined as the partial derivates of the nodal voltages with respect to the active and reactive power in ...

2024

DEMO toroidal field coil fast discharge unit integration studies

Roberto Guarino

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024