Publications related to Single molecule fluorescence resonance energy transfer scanning near-field optical microscopy

Plasmonic Nanostructures for Photocatalysis: Material, Photonic and Electronic Effects

Plasmonic photochemistry has a large potential to replace energy-intensive chemical processes with low-temperature, low-pressure light-driven chemical reactions. Plasmonic nanostructures have emerged as promising photocatalysts with exceptional and tunable ...

EPFL2024

Investigation of room-temperature single-photon emitters in GaN-based materials and GaN/AlN quantum dots

Johann Nicolaï Stachurski

Over the past decade, quantum photonics platforms aiming at harnessing the fundamental properties of single particles, such as quantum superposition and quantum entanglement, have flourished. In this context, single-photon emitters capable of operating at ...

EPFL2024

Study of growth-induced point defects and their impact on InGaN-based optoelectronic devices

Yao Chen

GaN exhibits a decomposition tendency for temperatures far below its melting point and common growth temperatures used in metal-organic vapour phase epitaxy (MOVPE).This characteristic is known to be a major obstacle for realising GaN bulk substrate. There ...

EPFL2024

Structural divergence of molecular hole selective materials for viable p-i-n perovskite photovoltaics: a comprehensive review

Mohammad Khaja Nazeeruddin, Peng Gao, Paramaguru Ganesan

Perovskite solar cells (PSCs) have garnered significant attention within the photovoltaic research community due to their remarkable progress in just one decade. Among the device configurations, the p-i-n structured PSC offers several advantages, including ...

Royal Society of Chemistry2024

High-Stable Lead-Free Solar Cells Achieved by Surface Reconstruction of Quasi-2D Tin-Based Perovskites

Feng Yang, Antonio Abate, Michael Saliba, Meng Li, Zhe Li, Xingyu Gao, Rui Zhu, Guixiang Li

Tin halide perovskites are an appealing alternative to lead perovskites. However, owing to the lower redox potential of Sn(II)/Sn(IV), particularly under the presence of oxygen and water, the accumulation of Sn(IV) at the surface layer will negatively impa ...

Wiley-V C H Verlag Gmbh2023

Photoelectrochemical Cell Engineering for Solar Energy Conversion

Dan Zhang

Solar energy is the most abundant energy source, harnessing solar energy holds the solution to the challenge of increasing global energy demand and reducing our dependence on fossil fuels. Photovoltaics which directly convert solar energy into electricity ...

EPFL2023

Indoor Self-Powered Perovskite Optoelectronics with Ultraflexible Monochromatic Light Source

Felix Thomas Eickemeyer, Tommaso Marcato, Hiroaki Jinno, Lukas Pfeifer

Self-powered skin optoelectronics fabricated on ultrathin polymer films is emerging as one of the most promising components for the next-generation Internet of Things (IoT) technology. However, a longstanding challenge is the device underperformance owing ...

Wiley-V C H Verlag Gmbh2023

Full Solution Process of a Near-Infrared Light-Emitting Electrochemical Cell Based on Novel Emissive Ruthenium Complexes of 1,10-Phenanthroline-Derived Ligands and a Eutectic Alloy as the Top Electrode

Mohammad Khaja Nazeeruddin

Near-infrared luminescent materials have recently received considerable attention for a large number of applications, including in solid-state lighting, as bioimaging agents, as photovoltaic cells, and in the telecommunication industry. By adding diverse e ...

AMER CHEMICAL SOC2023

Data-driven design of organic electronic materials

Jacob Terence Blaskovits

Singlet fission (SF) is a multiexciton-generating process whereby an excited state singlet (S1) is converted into two lower-energy triplets (T1). The inclusion of a SF-capable material into a photovoltaic device offers the potential for the absorption of p ...

EPFL2023

A critical perspective for emerging ultra-thin solar cells with ultra-high power-per-weight outputs

Michael Graetzel, Essa Awadh R Alharbi, Apostolos Panagiotopoulos, Georgios Kakavelakis

Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literat ...

Aip Publishing2023

Transparent Porous Conductive Substrates for Gas-Phase Photoelectrochemical Hydrogen Production

Jun Ho Yum, Kevin Sivula, Linda Lazouni, Loï Charles Carbone, Benjamin Goldman, Rebekah Anne Wells, Simon Nussbaum, Marina Caroline Michèle Caretti, Elizaveta Potapova Mensi, Hannah Elizabeth Johnson, Emeline Cécile Rideau

Gas diffusion electrodes are essential components of common fuel and electrolysis cells but are typically made from graphitic carbon or metallic materials, which do not allow light transmittance and thus limit the development of gas-phase based photoelectr ...

Wiley-V C H Verlag Gmbh2023

Ultrafast carrier and quasiparticle dynamics in strongly confined perovskite nanoplatelets

Etienne Christophe Socie

Over the past decade, lead halide perovskites (LHPs) have received considerable attention thanks to their impressive optoelectronic properties. Today, LHP-based devices are one of the most efficient single-junction solar cells, with power-conversion effici ...

EPFL2022

Donor-Acceptor-Donor "Hot Exciton" Triads for High Reverse Intersystem Crossing in OLEDs

Anne-Clémence Corminboeuf, Sergio Vela Llausi, Maria Fumanal Quintana, Yanan Zhu

Hot exciton materials have the potential to improve the quantum efficiency of organic light-emitting diodes (OLEDs) by promoting high reversed intersystem crossing (hRISC) between a high-lying triplet (T-n, n >= 2) and a radiative singlet (S-m). In recent ...

WILEY-V C H VERLAG GMBH2022

Synthesis and properties of heterostructures in nanowires and 2-D materials

Akshay Balgarkashi

Modern solid-state devices were made possible by the discovery of semiconductor heterostructures. Heterostructures offer the ability to fabricate low-dimensional nanostructures such as quantum dots which can restrain carriers in all three-directions. Quant ...

EPFL2022

Ligand Locking on Quantum Dot Surfaces via a Mild Reactive Surface Treatment

Aurélien Bornet, Raffaella Buonsanti, Anna Loiudice, Ona Segura Lecina

At the outermost surface of colloidal QDs are organic surface ligands which dynamically bind and release in solution to control the growth kinetics, control the size/shape of the crystals, passivate surface states, and provide colloidal stability through f ...

2021

A semiconducting polymer bulk heterojunction photoanode for solar water oxidation

Jun Ho Yum, Kevin Sivula, Nestor Guijarro Carratala, Arvindh Sekar, Liang Yao, Yongpeng Liu, Rebekah Anne Wells, Florent Alexandre Boudoire, Han-Hee Cho

Organic semiconductors hold promise to enable scalable, low-cost and high-performance artificial photosynthesis. However, the performance of systems based on organic semiconductors for light-driven water oxidation have remained poor compared with inorganic ...

NATURE RESEARCH2021

Synthesis of NIR-Absorbing Squaraine Dyes and their Use in Organic Upconversion Devices

Karen Verena Strassel

Squaraines are organic dyes showing the advantages of a simple synthesis, high absorption coefficients and tunable bandgaps from the visible to the near-infrared (NIR) region. Their molecular structure is based on a polymethine chain and a donor-acceptor-d ...

EPFL2021

Orientation‐Engineered Small‐Molecule Semiconductors as Dopant‐Free Hole Transporting Materials for Efficient and Stable Perovskite Solar Cells

Michael Graetzel, Miao Chen, Hong Zhang, Zhiwen Zhou

Crystallized p-type small-molecule semiconductors have great potential as efficient and stable hole transporting materials (HTMs) for perovskite solar cells (PSCs) due to their relatively high hole mobility, good stability and tunable HOMOs depending on th ...

2021

Luminescent, porous, metal-organic crystals: Design, synthesis, and applications

Fatmah Ebrahim

The work presented in this thesis is focused on the design and discovery of new luminescent, porous, crystalline materials for targeted applications. In particular, we focus on luminescent Metal-Organic Frameworks (MOFs) and Organic Molecules of Intrinsic ...

EPFL2020

Novel Interfacial Characterization and Surface Engineering in Semiconductor Electrodes for Optimized Solar Fuel Production

Yongpeng Liu

Harvesting sunlight, the ultimate renewable power source, in a cost-effective way has been long recognized as a necessary route to meet the global energy challenges. Solar energy can be transformed into electricity by means of photovoltaic devices to suppl ...

EPFL2021