Publications related to A 3D distinct lattice spring model for elasticity and dynamic failure

Related publications (13)

Large Concrete Rubble as a New Structural Construction Material: Opportunities and Digital Processes for Load-Bearing Walls

Christophe Moser, Corentin Jean Dominique Fivet, Maléna Bastien Masse, Maxence Grangeot

Concrete is amongst the most wasted materials on earth, mainly due to building demolitions. Currently, after a building’s end of life, concrete is crushed to be used as replacement gravel in new concrete mixes or for backfilling. Aiming to increase the cir ...

MDPI AG2025

Shaking table tests for seismic stability of stacked concrete blocks used for radiation shielding

Pierino Lestuzzi

This paper describes the shaking table tests carried out at the European Centre for Training and Research in Earthquake Engineering (EUCENTRE) to investigate the seismic behaviour of four configurations of stacked concrete blocks, commonly used at the Euro ...

ELSEVIER SCI LTD2023

Microfluidic devices for automated analysis of ingested bacteria in the Caenorhabditis elegans intestine

Farzad Rezaeianaran

In this thesis, we explored on-chip high-resolution imaging of the fate of intestinal bacteria and bacterial products in Caenorhabditis elegans (C. elegans). In the first part, we carried out high-resolution z-stack fluorescent imaging of Red Fluorescent P ...

EPFL2023

First "Skin Depth"estimations using GEANT4 and FLUKA based simulations for CERN beamlines

Maarten Willibrord Uriël Van Dijk

In order to have highly flexible secondary beamlines collimation is crucial. Collimators are blocks of material placed along the beamline that let the main beam pass within the collimator aperture limits, while most of the particles beyond it interact in t ...

ELSEVIER2022

Resonant Inelastic X-ray Scattering Studies of Low-Dimensional and Frustrated 3d Transition-Metal Oxides

Yi Tseng

3d transition-metal oxide materials with strong electron correlations and low dimensionality give rise to emerging exotic phases. Resonant inelastic X-ray scattering (RIXS) has developed as a powerful spectroscopic tool for probing the collective excitatio ...

EPFL2021

Measurement of Xi(++)(cc) production in pp collisions at root s=13 TeV

Jian Wang, Mingkui Wang, Olivier Schneider, Zhirui Xu, Yiming Li, Yi Zhang, Lei Zhang, Yi Wang, Aurelio Bay, Ho Ling Li, Guido Haefeli, Tatsuya Nakada, Christoph Frei, Mark Tobin, Frédéric Blanc, Maurizio Martinelli, Vladislav Balagura, Donal Patrick Hill, Liang Sun, Lesya Shchutska, François Fleuret, Mirco Dorigo, Liupan An, Renato Quagliani, Hang Yin, Guido Andreassi, Aravindhan Venkateswaran, Elena Graverini, Michel De Cian, Vladimir Macko, Federico Leo Redi, Luis Miguel Garcia Martin, Sebastian Schulte, Tommaso Colombo, Vitalii Lisovskyi, Tara Nanut, Minh Tâm Tran, Violaine Bellée, Guillaume Max Pietrzyk, Pavol Stefko, Pietro Marino, Maria Vieites Diaz, Matthieu Philippe Luther Marinangeli, Serhii Cholak, Veronica Sølund Kirsebom, Maria Elena Stramaglia, Surapat Ek-In, Ana Bárbara Rodrigues Cavalcante, Luca Pescatore, Sara Celani, Preema Rennee Pais, Maxime Schubiger, Plamen Hristov Hopchev, Carina Trippl, Thi Dung Nguyen, Alison Maria Tully, Olivier Göran Girard, Mâu Chung Nguyên, Simone Meloni, Xiaoqing Zhou, Elisabeth Maria Niel, Alexandre Brea Rodriguez

The production of Xi(++)(cc) baryons in proton-proton collisions at a centre-of-mass energy of root s = 13 Tev is measured in the transverse-momentum range 4 < p(T) < 15 GeV/c and the rapidity range 2.0 < y < 4.5. The data used in this measurement correspo ...

IOP PUBLISHING LTD2020

Identification of Factors of Importance for Spray Drying of Small Interfering RNA-Loaded Lipidoid-Polymer Hybrid Nanoparticles for Inhalation

Cypriane Marie Laurence Dormenval

Background With the recent approval of the first small interfering RNA (siRNA) therapeutic formulated as nanoparticles, there is increased incentive for establishing the factors of importance for the design of stable solid dosage forms of such complex nano ...

2019

Experimental investigation into bond behavior of FRP-to-concrete under mixed-mode I/II loading

Ardalan Hosseini

The main purpose of the current study is to investigate bond behavior of fiber reinforced polymer (FRP)-to-concrete under mixed-mode I/II loading. To attain this end, 150 × 150 × 330 mm concrete prisms were cast and strengthened by carbon fiber reinforced ...

Elsevier2017

Automatic Generation of Constructable Brick Sculptures

Mark Pauly, Yuliy Gennadievich Schwartzburg, Romain Pierre Testuz

Fabrication of LEGO© models in large scale requires careful pre-planning to produce constructable and stable models. We propose a system that, starting with a voxelization of a 3D mesh, merges voxels to form larger bricks, and then analyzes and repairs str ...

2013

Reduction of nickel oxide particles by hydrogen studied in an environmental TEM

Jan Van Herle, Cécile Hébert, Aïcha Hessler-Wyser, Quentin Thomas Jeangros

In situ reduction of nickel oxide (NiO) particles is performed under 1.3 mbar of hydrogen gas (H-2) in an environmental transmission electron microscope (ETEM). Images, diffraction patterns and electron energy-loss spectra (EELS) are acquired to monitor th ...

Springer US2013

Coupling of multiple LSP and SPP resonances: interactions between an elongated nanoparticle and a thin metallic film

Nicolas Bigler, Olivier Martin, Arash Farhang

We study the coupling interactions between a progressively elongated silver nanoparticle and a silver film on a glass substrate. Specifically, we investigate how the coupling between localized surface plasmons (LSPs) and propagating surface plasmon polarit ...

2013

Shape-Up: Shaping Discrete Geometry with Projections

Mark Pauly, Sofien Bouaziz, Yuliy Gennadievich Schwartzburg, Mario Moacir Deuss

We introduce a uniﬁed optimization framework for geometry processing based on shape constraints. These constraints preserve or prescribe the shape of subsets of the points of a geometric data set, such as polygons, one-ring cells, volume elements, or featu ...

Wiley-Blackwell2012

Impact of high energy high intensity proton beams on targets: Case studies for Super Proton Synchrotron and Large Hadron Collider

Juan Blanco Sancho

The Large Hadron Collider (LHC) is designed to collide two proton beams with unprecedented particle energy of 7 TeV. Each beam comprises 2808 bunches and the separation between two neighboring bunches is 25 ns. The energy stored in each beam is 362 MJ, suf ...

2012