Publications related to Angstrom-Scale Transparent Overcoats: Interfacial Nitrogen-Driven Atomic Intermingling Promotes Lubricity and Surface Protection of Ultrathin Carbon

Related publications (18)

Time-dependent behavior of Fe-based Shape Memory Alloys: A Comprehensive Analysis of Creep, Stress Relaxation, and Corrosion Behavior for Concrete Reinforcement Applications

Shape memory alloys (SMAs) exhibit unique characteristics, enabling them to recover their original shape either upon unloading (pseudoelasticity) or through heating (shape memory effect, SME). Due to their exceptional mechanical properties, the SME, and th ...

EPFL2025

Artificial Intelligence for Advanced Functional Materials: Exploring Current and Future Directions

Nicola Marzari

This perspective addresses the topic of harnessing the tools of artificial intelligence (AI) for boosting innovation in functional materials design and engineering as well as discovering new materials for targeted applications in energy storage, biomedicin ...

IOP Publishing Ltd2025

Ultralong 100 ns spin relaxation time in graphite at room temperature

László Forró, Bálint Náfrádi, Péter Szirmai

Graphite has been intensively studied, yet its electron spins dynamics remains an unresolved problem even 70 years after the first experiments. The central quantities, the longitudinal (T-1) and transverse (T-2) relaxation times were postulated to be equal ...

Nature Portfolio2023

Nonlinear Photoluminescence in Gold Thin Films

Sergejs Boroviks

Promisingapplications in photonics are driven by the ability tofabricate crystal-quality metal thin films of controlled thicknessdown to a few nanometers. In particular, these materials exhibit ahighly nonlinear response to optical fields owing to the indu ...

AMER CHEMICAL SOC2023

Integrated 4-terminal single-contact nanoelectromechanical relays implemented in a silicon-on-insulator foundry process

Niels Quack, Alain Yuji Takabayashi

Integrated nanoelectromechanical (NEM) relays can be used instead of transistors to implement ultra-low power logic circuits, due to their abrupt turn off characteristics and zero off-state leakage. Further, realizing circuits with 4-terminal (4-T) NEM rel ...

Royal Soc Chemistry2023

Graphene nanoplatelets promoted CoO-based catalyst for low temperature CO2 methanation reaction

Andreas Züttel, Liping Zhong, Thi Ha My Pham, Youngdon Ko

Methanation of CO2 is an important reaction for reducing CO2 emissions in a power-to-gas system. Compared to cobalt supported on gamma-Al2O3, cobalt supported on graphene nanoplatelets (GNPs) showed significantly better performance for CO2 methanation. Cob ...

FRONTIERS MEDIA SA2023

Range-separated hybrid functionals for accurate prediction of band gaps of extended systems

Alfredo Pasquarello, Stefano Falletta, Jing Yang

In this work, we systematically evaluate the accuracy in band gap prediction of range-separated hybrid functionals on a large set of semiconducting and insulating materials and carry out comparisons with the performance of their global counterparts. We obs ...

NATURE PORTFOLIO2023

Nanoscale engineering of solid-state materials for boosting hydrogen storage

Andreas Züttel, Yudong Xue, Yunting Wang

The development of novel materials capable of securely storing hydrogen at high volumetric and gravimetric densities is a requirement for the wide-scale usage of hydrogen as an energy carrier. In recent years, great efforts via nanoscale tuning and designi ...

Royal Society of Chemistry2023

Electronic synergy to boost the performance of NiCoP-NWs@FeCoP-NSs anodes for flexible lithium-ion batteries

Kangning Zhao

Research and development of flexible lithium-ion batteries (LIBs) with high energy density and long cycle life for portable and wearable electronic devices has been a cutting-edge effort in recent years. In this paper, a novel flexible self-standing anode ...

ROYAL SOC CHEMISTRY2022

Latent Mechanisms of Polarization Switching from In Situ Electron Microscopy Observations

Vasiliki Tileli, Reinis Ignatans

In situ scanning transmission electron microscopy enables observation of the domain dynamics in ferroelectric materials as a function of externally applied bias and temperature. The resultant data sets contain a wealth of information on polarization switch ...

WILEY-V C H VERLAG GMBH2022

Selective Borohydride Oxidation Reaction on Nickel Catalyst with Anion and Cation Exchange Ionomer for High-Performance Direct Borohydride Fuel Cells

Andreas Züttel, Loris Giovanni Lombardo, Heena Yang, Thi Ha My Pham, Mo Li, Youngdon Ko

Direct borohydride fuel cells (DBFCs) operate with liquid H2O2 and a high-energy-density NaBH4 solution. A facile, direct synthesis method using a non-noble nickel catalyst for the DBFC anode is shown. The complex anode reaction with an anion-exchange iono ...

WILEY-V C H VERLAG GMBH2022

Galvanic replacement reactions of Ga and In with Cu for the synthesis of bimetallic nanoparticles

Laia Castilla Amorós

The need for efficient and selective catalysts, capable of driving important conversions to build a more sustainable society, encourages the development of synthetic approaches towards new nanomaterials. Cu-based bimetallic nanoparticles (NPs) promise to f ...

EPFL2022

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

Cyril Henri Dénéréaz

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a uni ...

Wiley-V C H Verlag Gmbh2022

Scaling theory for the statistics of slip at frictional interfaces

Matthieu Wyart, Thomas Willem Jan de Geus

Slip at a frictional interface occurs via intermittent events. Understanding how these events are nucleated, can propagate, or stop spontaneously remains a challenge, central to earthquake science and tribology. In the absence of disorder, rate-and-state a ...

AMER PHYSICAL SOC2022

Photoelectrochemical Oxygen Evolution on Mesoporous Hematite Films Prepared from Maghemite Nanoparticles

Michael Graetzel, Shaik Mohammed Zakeeruddin

Iron oxides, especially hematite (alpha-Fe2O3), a are promising materials for applications in photoelectrochemical cells and photo-redox catalysis. However, realizing high-performance hematite photoanodes via an environmentally-friendly route remains a gre ...

2022

Comparison and optimization of different fuel processing options for biogas-fed solid-oxide fuel cell plants

François Maréchal, Jan Van Herle

The biogas needs to be reformed before electro-chemical conversion in the solid-oxide fuel cell, which can be promoted efficiently with wise thermal management and reforming conditions. To ensure the system safety and catalysts durability, additional miner ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Validation of edge turbulence codes against the TCV-X21 diverted L-mode reference case

Nicola Vianello, Davide Galassi, Paolo Ricci, Holger Reimerdes, Christian Gabriel Theiler, Cedric Kar-Wai Tsui, Hugo De Oliveira, Maurizio Giacomin, Sophie Danielle Angelica Gorno, Claudia Colandrea, Nicola Offeddu

Self-consistent full-size turbulent-transport simulations of the divertor and scrape-off-layer (SOL) of existing tokamaks have recently become feasible. This enables the direct comparison of turbulence simulations against experimental measurements. In this ...

IOP Publishing Ltd2022

Dataset for "GaAs nanowires on Si nanopillars: towards large scale, phase-engineered arrays"

Anna Fontcuberta i Morral, Wonjong Kim, Jean-Baptiste Leran, Didem Dede, Nicholas Paul Morgan, Akshay Balgarkashi, Lea Ghisalberti, William Craig Carter

Large-scale patterning for vapor-liquid-solid growth of III-V nanowires is a challenge given the required feature size for patterning (45 to 60 nm holes). In fact, arrays are traditionally manufactured using electron-beam lithography,for which processing t ...

Zenodo2022