Design status of the double Closure Plate Sub-Plate concept for the ITER Electron Cyclotron Upper Launcher

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Edge Localised Modes (ELMs) induced fast-ion losses have been characterised in the energy, E, and pitch, λ = v ∥ / v , space using a unique Fast Ion Loss Detector (FILD) on the tokamak à configuration variable. The FILD is equipped with a 128 Avalanche Pho ...

Seven different high current conductors for fusion applications, made of High Temperature Superconducting stacked tapes, have been successfully tested in the Quench Experiment campaign supported by EUROfusion and carried out in SULTAN. The aim of this exte ...

Efficiency is a key factor for high-power gyrotrons, particularly in future fusion power plants, where a large number of gyrotron units will be required for plasma heating. A single-stage depressed collector enhances efficiency from approximately 35% to 50 ...

Energy piles represent an innovative technology that can help provide sustainable geothermal heating or cooling energy for thermal conditioning purposes. In hot-dominated climates, the interest is to inject heat in the ground and extract energy for space-c ...

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

Plasma-facing materials (PFMs) represent one of the most significant challenges for the design of future nuclear fusion reactors. Inside the reactor, the divertor will experience the harshest material environment: intense bombardment of neutrons and plasma ...

Water can be vitrified if it is cooled at high rates, which makes it possible to outrun crystallization in so-called no man’s land, a range of deeply supercooled temperatures where water crystallizes rapidly. Here, we study the reverse process in pure wate ...

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

The superconducting magnet system of the Divertor Tokamak Test (DTT) facility, composed of 18 toroidal field (TF) coils, 6 poloidal field coils and a central solenoid, has been designed and many procurements have been launched. Some manufacturing aspects a ...

Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. It is found that the performance of TCV IBL is mainly limited by (neoclassi ...

The medium-voltage (MV) dual active bridge (DAB) converter with series-connected SiC (S-SiC) MOSFETs is a promising solution for high-power-density isolated dc/dc converter. To improve the voltage sharing and reliability of S-SiC, relatively large snubber ...

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

Negative triangularity (NT) scenarios in TCV have been compared to positive triangularity (PT) scenarios using the same plasma shapes foreseen for divertor tokamak test tokamak operations. The experiments provided a NT/PT L-mode pair and a PT H-mode with d ...

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

The next generation of high-energy physics (HEP) detectors will predominantly be silicon-based. As pixel sensor technology gains momentum and the number of channels surpasses one billion (for a volume of approximately 20 m3) to achieve the high resolution ...

We present a convergence study of the gyromoment (GM) approach, which is based on projecting the gyrokinetic distribution function onto a Hermite–Laguerre polynomial basis, focused on the cyclone base case (CBC) (Lin et al., Phys. Rev. Lett., vol. 83, no. ...

Design status of the double Closure Plate Sub-Plate concept for the ITER Electron Cyclotron Upper Launcher

Chat with Graph Search

First measurements of velocity-space resolved intra-ELM fast-ion losses on the TCV tokamak

DC and quench performance assessment from the EUROfusion HTS Quench Experiment campaign and projection to magnet operation

Effects of reflected electrons on the efficiency of high-power gyrotrons

Performance of energy piles foundation in hot-dominated climate: A case study in Dubai

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

Comprehensive Screening of Plasma-Facing Materials for Nuclear Fusion

Flash Melting Amorphous Ice

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Decomposition method to evaluate district heating/cooling network potential at urban scale

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

DTT toroidal field conductor samples test in Sultan: DC and AC characterization

Progress in the development of the ITER baseline scenario in TCV

Phase Shift Angle Segmentation Modulation for Soft-Switching Medium-Voltage DAB Converter With Series-Connected SiC MOSFETs

Global fluid simulations of plasma turbulence in stellarators

Modeling and optimization of PCB coils for inductive power transfer systems

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background

Radiation-tolerant Multichannel Dew Point Temperature Monitoring System for High Energy Physics Applications

Gyrokinetic moment-based simulations of the Dimits shift