Raising the temperature on electrodes for anion exchange membrane electrolysis-activity and stability aspects

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Water is the solvent that enables life, essential to every biological process and shaping our environment. Yet, it is the most anomalous liquid known to humankind. Many of these anomalous properties originate from the deeply supercooled regime. Unfortunate ...

Hydrogen hydrates, formed from hydrogen and water under high-pressure and low-temperature conditions, exhibit a rich phase behavior governed by intricate intermolecular interactions. Their structural evolution under extreme conditions provides a unique pla ...

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

In the field of electrochemical CO2 reduction, both continuum models and molecular dynamics (MD) models have been used to understand the electric double layer (EDL). MD often focuses on the region within a few nm of the electrode, while continuum models ca ...

A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...

In recent years, many efforts have been made to find alternative renewable energy sources that can ideally replace the use of fossil fuels in all aspects. One of the new emerging energy technologies is the bioelectrochemical system, of which two types are ...

Renewable energy sources offer a promising solution for mitigating sustainability and CO2 emissions-related issues due to their vast energy generation capacity. They enable hydrogen production via water electrolysis, as well as carbon capture and utilizati ...

Living photovoltaics are microbial electrochemical devices that use whole cell–electrode interactions to convert solar energy to electricity. The bottleneck in these technologies is the limited electron transfer between the microbe and the electrode surfac ...

Permissible limits of Pb 2+ in drinking water are being reduced from 10 mu gL -1 to 5 mu gL -1 , which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmen ...

Silver is one of the most studied electrode materials for the electrochemical reduction of carbon dioxide into carbon monoxide, a product with many industrial applications. There is a growing number of reports in which silver is implemented in gas diffusio ...

The present invention relates to method for the synthesis of a transition metal catalyst consisting of electrodeposition on a substrate electrode from an electrolyte solution comprising at least one transition metal precursor, wherein the electrodeposition ...

A reversible photo-electrochemical device operating under concentrated irradiation could offer a stand-alone solution for producing solar fuel (in photo-driven electrolysis mode) and power (in fuel cell mode). This strategy would present the advantage of h ...

Precipitation of (bi)carbonate salts during the electrochemical CO2 reduction (CO2RR) has been identified as a major cause of degradation and one of the main challenges to be overcome before implementing this technology on the industrial scale. Recently, t ...

For the sustainable development of the renewable hydrogen sector, alkaline electrolysis appears to be a technology of choice. Nevertheless, despite its long history that showed its reliability in the industrial field and despite the traditional belief from ...

Catalytic hydrothermal gasification (cHTG) (T > 374 °C, P > 22.1 MPa) converts wet biomass into renewable methane. As sulfur compounds in biomass can deactivate metal catalysts, desulfurization of the cHTG stream is crucial. Sulfides, sulfates, and organos ...

The design and discovery of potential novel materials is critical for the advancement of climate change mitigation technologies. In this respect, metal-organic frameworks (MOFs) have received considerable attention over the last two decades. The combinatio ...

A new method for the rapid and economic fabrication of dual soft microelectrodes for Soft-Probe-Scanning electrochemical microscopy (Soft-Probe-SECM) and their use for the simultaneous local detection of locally generated species is presented. The process ...

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

Layered cathodes are among the most promising cathodes for high-energy-density Li-ion batteries, yet hindered by the structural degradation from both bulk strain and surface oxygen loss at high voltage (above 4.5 V). Herein, we report a pre-fatigue trainin ...

Micro- nano-electrodes have demonstrated superior performances in measuring attenuated intracellular action potentials from electrogenic cell cultures compared to traditional multi-electrode arrays. Yet, the understanding of the critical electrode features ...

Raising the temperature on electrodes for anion exchange membrane electrolysis-activity and stability aspects

Chat with Graph Search

Structure and dynamics of deeply supercooled water

Hydrogen Hydrates Under Extreme Conditions: Insights Into High-pressure Phases and Implications for Planetary Interiors

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Contrasting Views of the Electric Double Layer in Electrochemical CO2 Reduction: Continuum Models vs Molecular Dynamics

Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode

Green hydrogen production using Shewanella oneidensis MR-1 bioanode and cuprous oxide-based photocathode

Tailoring nanocatalysts and reaction interfaces for water- and CO2-electrolysis

Polydopamine-coated photoautotrophic bacteria for improving extracellular electron transfer in living photovoltaics

Electrochemical sensors modified with iron oxide nanoparticles/ nanocomposites for voltammetric detection of Pb (II) in water: A review

Rate-Determining Step for Electrochemical Reduction of Carbon Dioxide into Carbon Monoxide at Silver Electrodes

Nickel molybdenum catalysts and their methods of preparation

Reversible photo-electrochemical device for solar hydrogen and power generation

Operando Observation of (Bi)carbonate Precipitation during Electrochemical CO2 Reduction in Strongly Acidic Electrolytes

Perspective Alkaline electrolyzers: Powering industries and overcoming fundamental challenges

Behavior of sulfur under hydrothermal conditions: removal strategies for catalytic processes

A diversity-driven discovery of potential nanoporous materials for energy-related applications

Simultaneous local sensing of two chemical properties with dual soft probe scanning electrochemical microscopy

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

A pre-fatigue training strategy to stabilize LiCoO2 at high voltage

Development of new volcano-shaped microelectrodes for single cell electrochemistry, electrophysiology and impedance studies