Publications related to Magnetic-free Nitride Optical Isolator on Chip

Related publications (32)

Integrated Magnetic-free Nitride Optical Isolator

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Jijun He, Anat Siddharth, Terence Albert Emile Blésin

We demonstrated an integrated magnetic-free optical isolator for Si3N4 photonics using AlN piezoelectric actuators via spatio-temporal modulation. By entering into the strong mode coupling regime, maximum of 9dB isolation and

IEEE2021

Structural and microstructural studies on SiC-SiO2 ceramic composites

Ho-Yun Lee

In this study, SiC ceramic substrates were prepared with 99.5% silicon carbide powders which were came from waste silicon mud during the manufacturing process of solar cells. It is found that a SiO2 layer with 50 nm in thickness is present on the SiC surfa ...

2019

Strength and fracture of silicon second-phase particles in aluminium casting alloys

Martin Guillermo Mueller

The mechanical behaviour of metallic materials that have a microstructure composed of a brittle phase embedded in a ductile matrix is dictated by a complex interplay of factors such as local phase properties, cohesive properties, geometrical characteristic ...

EPFL2017

Rational Catalyst Design for Selective Hydrogenations : Nitroarenes and Alkynes as Case Studies

Daniel André Samuel Lamey

Catalyst design for selective hydrogenations is of major importance for the manufacturing of fine chemicals. Catalytic procedure which uses scarce and expensive noble metals is very challenging in terms of exclusive attack of a single functionality or subs ...

EPFL2015

High Temperature Behavior of Nano-Structured Ceramic Composites Studied by Mechanical Spectroscopy

Mehdi Mazaheri

Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...

EPFL2013

Interface Investigations on Titanium Nitride Bilayer Systems

Nanocomposite coatings composed of two phases with atomically sharp phase boundaries, show interesting mechanical properties. These properties are often originating from their high interface to volume ratio. Composites of nanocrystalline titanium nitride ( ...

EPFL2012

Overview of Cryogenic Operation in Nanoscale Technology Nodes

Edoardo Charbon

Cryogenic operation is the backbone of many cutting edge applications. Significant work has been done to characterize and model all cryogenic effects for creating a reliable, robust and efficient cryogenic design across a wide range of technologies and pro ...

IEEE2023

Characterization of two electronic subsystems in cuprates through optical conductivity

Ana Akrap, Edoardo Martino, Neven Barisic

Understanding the physical properties of unconventional superconductors as well as of other correlated materials presents a formidable challenge. Their unusual evolution with doping, frequency, and temperature has frequently led to non-Fermi-liquid (non-FL ...

2023

Studying the Formation of Ni3C from CO and Metallic Ni at T=265 degrees C in Situ Using Ni K-Edge X-ray Absorption Spectroscopy

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis

Metallic Ni nanopowder (Ni-0) was monitored during 23 h of carburization (2CO + 3Ni(0) - Ni3C + CO2, T = 265 degrees C) using Ni K-edge X-ray absorption spectroscopy. X-ray diffraction analysis made afterward at room temperature revealed 28 +/- 3% Ni3C amo ...

American Chemical Society2009

Time-Resolved Hanbury Brown-Twiss Interferometry of On-Chip Biphoton Frequency Combs Using Vernier Phase Modulation

Tobias Kippenberg, Junqiu Liu

Biphoton frequency combs (BFCs) are promising quantum sources for large-scale and high-dimensional quantum information and networking systems. In this context, the spectral purity of individual frequency bins will be critical for realizing quantum networki ...

American Physical Society (APS)2023

Predicting nonlinear optical scattering with physics-driven neural networks

Demetri Psaltis, Carlo Gigli

Deep neural networks trained on physical losses are emerging as promising surrogates for nonlinear numerical solvers. These tools can predict solutions to Maxwell's equations and compute gradients of output fields with respect to the material and geometric ...

AIP Publishing2023

Fabrication and functionalization of nanochannels by electron-beam-induced silicon oxide deposition

Jürgen Brugger, Horst Arthur Vogel, Christian Santschi, Christophe Danelon

We report on the fabrication and electrical characterization of functionalized solid-state nanopores in low stress silicon nitride membranes. First, a pore of approximately 50 nm diameter was drilled using a focused ion beam technique, followed by the loca ...

2006

Nanofibres de carbone sur filtre métallique comme support catalytique structuré

Pascal Tribolet

The main objectives of this work are 2-fold : The development of a novel type of composite material based on carbon nanofibers supported on sintered metal fibers filters (CNF/SMF) and to explore the use of this material as a catalytic support for a model r ...

EPFL2006

Freeze-Thaw Durability of Basalt Fibre Reinforced Bio-Based Unsaturated Polyester Composite

Mateus De Assunção Hofmann

This paper presents an experimental study of the wet freeze-thaw (FT) durability of a fibre-polymer composite produced by vacuum infusion using an innovative bio-based unsaturated polyester resin (UPR) and basalt fibres. As the benchmark, an equivalent com ...

MDPI2023

Micro-Cup Architecture for Printing and Coating Asymmetric 2d-Material-Based Solid-State Supercapacitors

Frank Nüesch, René Uwe Schneider, Mohammad Jafarpour

High energy density micro-supercapacitors (MSCs) are in high demand for miniaturized electronics and microsystems. Research efforts today focus on materials development, applied in the planar interdigitated, symmetric electrode architecture. A novel "cup & ...

2023

N-Containing Carbons Derived from Microporous Coordination Polymers for Use in Post-Combustion Flue Gas Capture

Emad Oveisi, Wendy Lee Queen, Vikram Vinayak Karve, Jordi Espin Marti

Herein, novel carbons that, owing to a high density of micropores (up to 79%) and N-content (up to 14.9%), offering exciting potential for post-combustion CO2 capture are reported. Given that little is known about how starting materials impact the structur ...

WILEY-V C H VERLAG GMBH2023

Recent Advances in Piezoelectric Materials for Electromechanical Transducer Applications

Dragan Damjanovic

Ferroelectricity has made a huge impact on science and technology since Joseph Valasek (then a Ph.D. student at the University of Minnesota) discovered it in 1920, a little longer than 100 years ago. Whereas Dr. Valasek's original research was motivated by ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Cryogenic InGaAs HEMT-Based Switches For Quantum Signal Routing

Christian Enz, Hung-Chi Han

We demonstrate cryogenic switching devices based on HEMT technology for scalable quantum computer (QC) control and readout signal routing. The switches are implemented in a quantum well network design without metal contacts between gates, and exhibit extre ...

IEEE2022

Thermally reconfigurable metalens

Giulia Tagliabue, Anna Archetti, Fateme Kiani Shahvandi, Theodoros Tsoulos, Nathanaël Restori, Ren-Jie Lin

Reconfigurable metalenses are compact optical components composed by arrays of meta-atoms that offer unique opportunities for advanced optical systems, from microscopy to augmented reality platforms. Although poorly explored in the context of reconfigurabl ...

WALTER DE GRUYTER GMBH2022

Bayesian Automatic Relevance Determination for Utility Function Specification in Discrete Choice Models

Michel Bierlaire, Nicola Marco Ortelli

Specifying utility functions is a key step towards applying the discrete choice framework for understanding the behaviour processes that govern user choices. However, identifying the utility function specifications that best model and explain the observed ...

IEEE Institute of Electrical and Electronics Engineers2022