Publications related to Low-order distributed feedback optofluidic dye laser with reduced threshold

Related publications (32)

Wavelength-stabilized figure-of-9 thulium-doped all-fiber laser emitting 560 fs pulses

Camille Sophie Brès, Moritz Bartnick, Gayathri Bharathan

We demonstrate a figure-of-9 all-fiber thulium-doped laser (TDFL) that generates 560 fs long pulses at 1948 nm wavelength. In order to achieve self-starting passive mode-locking, we utilize an in-fiber Faraday rotator to induce a nonreciprocal phase shift. ...

Iop Publishing Ltd2024

Voltage-tunable optical parametric oscillator with an alternating dispersion dimer integrated on a chip

Tobias Kippenberg, Johann Emmeram Riemensberger, Alexey Tikan, Aleksandr Tusnin, Anton Stroganov

Optical parametric oscillators enable the conversion of pump light to new frequency bands using nonlinear optical processes. Recent advances in integrated nonlinear photonics have led to the creation of compact, chip-scale sources via Kerr-nonlinearity-ind ...

Optica Publishing Group2023

Single-frequency violet and blue laser emission from AlGaInN photonic integrated circuit chips

Tobias Kippenberg, Anat Siddharth

Chip-based, single-frequency and low phase-noise integrated photonic laser diodes emitting in the violet (412 nm) and blue (461 nm) regime are demonstrated. The GaN-based edge-emitting laser diodes were coupled to high-quality on-chip micro-resonators for ...

Optica Publishing Group2023

Sub-kHz-Linewidth External-Cavity Laser (ECL) With Si3N4 Resonator Used as a Tunable Pump for a Kerr Frequency Comb

Tobias Kippenberg, Junqiu Liu

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. Exter ...

IEEE Institute of Electrical and Electronics Engineers2023

Metasurface-stabilized optical microcavities

Ileana-Cristina Benea-Chelmus

Cavities concentrate light and enhance its interaction with matter. Confining to microscopic volumes is necessary for many applications but space constraints in such cavities limit the design freedom. Here we demonstrate stable optical microcavities by cou ...

Nature Portfolio2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

Third-harmonic generation monitoring of femtosecond-laser-induced in-volume functional modifications

Christian Enz, Yves Bellouard, Assim Boukhayma, Olivier Bernard, Andrea Kraxner

During the last two decades, ultrafast in-volume laser-based processing of transparent materials has emerged as a key 3D-printing method for manufacturing a variety of complex integrated photonic devices and micro-parts. Yet, identifying suitable laser pro ...

2023

Ultrafast tunable lasers using lithium niobate integrated photonics

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Johann Emmeram Riemensberger, Anat Siddharth, Guanhao Huang, Mikhail Churaev, Viacheslav Snigirev

Early works(1) and recent advances in thin-film lithium niobate (LiNbO3) on insulator have enabled low-loss photonic integrated circuits(2,3), modulators with improved half-wave voltage(4,5), electro-optic frequency combs(6) and on-chip electro-optic devic ...

NATURE PORTFOLIO2023

Integrated photon-pair source with monolithic piezoelectric frequency tunability

Tobias Kippenberg, Rui Ning Wang, Arslan Sajid Raja, Anat Siddharth

This work demonstrates the capabilities of an entangled photon-pair source at telecom wavelengths, based on a photonic integrated Si3N4 microresonator with monolithically integrated piezoelectric frequency tuning. Previously, frequency tuning of photon pai ...

AMER PHYSICAL SOC2023

All-glass miniature GHz repetition rate femtosecond laser cavity

Yves Bellouard, Saood Ibni Nazir, Antoine Maxime Delgoffe, Sargis Hakobyan

Free-space optics allows for design freedom and control, but miniaturization and manufacturability are limited. Here, we present a method for manufacturing complex miniaturized free-space optical systems that combines contactless femtosecond laser-activate ...

2023

Hybrid lithium niobate-on-silicon nitride platform for mid-IR supercontinuum generation

Tobias Kippenberg, Mikhail Churaev

Integrated optics has shown itself very convenient for exploiting nonlinear processes as it results in high confinement factor, freedom of dispersion engineering and compactness. However, the choice of materials is crucial for the development of nonlinear ...

SPIE-INT SOC OPTICAL ENGINEERING2023

Portable impedance-sensing device for microorganism characterization in the field

Sandro Carrara

A variety of biosensors have been proposed to quickly detect and measure the properties of individual microorganisms among heterogeneous populations, but challenges related to cost, portability, stability, sensitivity, and power consumption limit their app ...

Nature Portfolio2023

Low-noise frequency-agile photonic integrated lasers for coherent ranging

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Johann Emmeram Riemensberger, Wenle Weng, Jijun He, Anat Siddharth, Andrey Voloshin, Viacheslav Snigirev, Vladimir Shadymov

Stable and tunable integrated lasers are fundamental building blocks for applications from spectroscopy to imaging and communication. Here the authors present a narrow linewidth hybrid photonic integrated laser with low frequency noise and fast linear wave ...

Nature Portfolio2022

Sensitivity and spectral control of network lasers

Alexis Arnaudon

Recently, random lasing in complex networks has shown efficient lasing over more than 50 localised modes, promoted by multiple scattering over the underlying graph. If controlled, these network lasers can lead to fast-switching multifunctional light source ...

Nature Portfolio2022

Electrically tunable optical resonator on a chip for fast tunable integrated lasers

Tobias Kippenberg, Johann Emmeram Riemensberger, Anat Siddharth, Grigorii Likhachev

The present invention relates to an electrically tunable photonic resonator device for a component having a fast and flat actuation response, comprising: - At least one optical waveguide with an optical interface for coupling in laser light, - At least one ...

2022

Platicon microcomb generation using laser self-injection locking

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Wenle Weng, Jijun He, Miles Henry Anderson

The past decade has witnessed major advances in the development and system-level applications of photonic integrated microcombs, that are coherent, broadband optical frequency combs with repetition rates in the millimeter-wave to terahertz domain. Most of ...

Nature Portfolio2022

Observation of SQUID-Like Behavior in Fiber Laser with Intra-Cavity Epsilon-Near-Zero Effect

Camille Sophie Brès, Marco Clementi, Jiaye Wu

Establishing relations between fundamental effects in far-flung areas of physics is a subject of great interest in the current research. Realization of a novel photonic system akin to the radio-frequency superconducting quantum interference device (RF-SQUI ...

WILEY-V C H VERLAG GMBH2022

A photonic integrated continuous-travelling-wave parametric amplifier

Tobias Kippenberg, Junqiu Liu, Rui Ning Wang, Johann Emmeram Riemensberger, Jijun He, Nikolai Kuznetsov

The ability to amplify optical signals is of pivotal importance across science and technology typically using rare-earth-doped fibres or gain media based on III-V semiconductors. A different physical process to amplify optical signals is to use the Kerr no ...

NATURE PORTFOLIO2022

Defect formation and mitigation during laser powder bed fusion of copper

Carl Tore Viktor Lindström

Additive manufacturing (AM) is a group of processing technologies which has the potential to revolutionize manufacturing by allowing easy manufacturing of complex shapes and small series. One AM-method which is of high interest for processing of metals is ...

EPFL2021

A tunable femtosecond fiber laser source for multiphoton emission microscopy

Pierre-Marc Jean Marie Dansette

Second harmonic generation microscopy is used to image interfaces or non-centrosymmetric structures and molecules. Two-photon fluorescence microscopy can image molecules within cells without using markers. Thus those technics have lead to advances in our u ...

EPFL2021