Publications related to A PSDT shell finite element formulation including structural damping

Related publications (33)

Harmonic Stability Analysis of Microgrids with Converter-Interfaced Distributed Energy Resources, Part II: Case Studies

Mario Paolone, Andreas Martin Kettner, Johanna Kristin Maria Becker

In Part I of this paper a method for the Harmonic Stability Assessment (HSA) of power systems with a high share of Converter-Interfaced Distributed Energy Resources (CIDERs) was proposed. Specifically, the Harmonic State-Space (HSS) model of a generic powe ...

Institute of Electrical and Electronics Engineers (IEEE)2025

Dynamic behavior of exposed geomembrane systems in pressure waterways

Giovanni De Cesare, Samuel Luke Vorlet

Geomembrane systems have been used in dams and reservoirs as rehabilitation technology since several decades and are now used worldwide. They act as impervious layer to prevent and mitigate water leakage and damage to structures. They meet the needs of man ...

CRC Press/Balkema2023

Nonlinear Frequency Conversion in III-Nitride Doubly Resonant Photonic Crystal Cavities

Jun Wang

Nonlinear frequency conversion processes, such as second-harmonic generation (SHG) and spontaneous parametric down-conversion (SPDC), are essential in many applications, including the generation of entangled photons. It's desirable to enhance these process ...

EPFL2023

Tunable photo-induced second-harmonic generation in a mode-engineered silicon nitride microresonator

Camille Sophie Brès, Jianqi Hu, Edgars Nitiss, Boris Zabelich, Anton Stroganov

All-optical poling enables reconfigurable and efficient quasi-phase-matching for second-order parametric frequency conversion in silicon nitride integrated photonics. Here, we report broadly tunable milliwatt-level second-harmonic generation in a small fre ...

2023

Self-sustained dynamics and forced resonant oscillations in flows: cross-junction jets and sloshing liquids

Alessandro Bongarzone

In engineering, oscillatory instabilities and resonances are often considered undesirable flow features and measures are taken to avoid them. This may include avoiding certain parametric regions or implementing control and mitigation strategies. However, t ...

EPFL2023

Learning Dynamics of Spring-Mass Models with Physics-Informed Graph Neural Networks

Olga Fink, Vinay Sharma

We propose a physics-informed message-passing graph neural network (GNN) for learning the dynamics of springmass systems. The proposed method embeds the underlying physics directly into the message-passing scheme of the GNN. We compare the new scheme with ...

Research Publishing2023

Damping of flexure blades based on bi-material additive manufacturing

Simon Nessim Henein, Florent Cosandier, Loïc Benoît Tissot-Daguette, Nikola Kalentics, Florent Alexandre Boudoire, Elias Sebastian Klauser

Flexure-based mechanisms have become state-of-the-art solutions for the design of high-precision mechanisms, free from friction wear, backlash, and lubrication. These properties which are necessary for applications in ultraclean or harsh environments, neve ...

2023

Data-driven 1D wave propagation for site response analysis

Jean-François Molinari, Antonio Joaquin Garcia Suarez, Sacha Zenon Wattel

Prediction of ground motion triggered by earthquakes is a prime concern for both the seismology community and geotechnical earthquake engineering one. The subfield occupied with such a problem is termed site response analysis (SRA), its one-dimensional fla ...

WILEY2023

Distribution of the thermal residual stresses in the WC-Co microstructure by finite element method

Daniele Mari, Lucas Eric Jacques Degeneve

A Finite Element Model is used to observe the build-up of residual thermal stresses during the sintering process in two WC-Co samples with different volume fractions of Co. A realistic model of the two phase material is obtained by FIB slicing a real WC-Co ...

ELSEVIER SCI LTD2023

Preserving the positivity of the deformation gradient determinant in intergrid interpolation by combining RBFs and SVD: Application to cardiac electromechanics

Alfio Quarteroni, Francesco Regazzoni

The accurate, robust and efficient transfer of the deformation gradient tensor between meshes of different resolution is crucial in cardiac electromechanics simulations. This paper presents a novel method that combines rescaled localized Radial Basis Funct ...

Elsevier Science Sa2023

Dynamics of entrapped microbubbles with multiple openings

Mahmut Selman Sakar, Murat Kaynak, Amit Yedidia Dolev

Microbubbles excited by acoustic fields inside water oscillate, and generate acoustic radiation forces and drag-induced acoustic streaming. These forces can be harnessed in various biomedical applications such as targeted drug delivery and on-chip biomanip ...

2022

Doubly resonant second-harmonic generation of a vortex beam from a bound state in the continuum

Nicolas Grandjean, Romuald Houdré, Jean-François Carlin, Matteo Galli, Momchil Minkov, Marco Clementi, Jun Wang

Second-harmonic generation in nonlinear materials can be greatly enhanced by realizing doubly resonant cavities with high quality factors. However, fulfilling such doubly resonant condition in photonic crystal (PhC) slab cavities is a long-standing challen ...

2020

Modes interplay controls the second harmonic generation dynamics of plasmonic nanostructures

Olivier Martin, Andrei Kiselev, Gabriel David Bernasconi

A large amount of experimental and theoretical works deals with the second harmonic generation from different plasmonic geometries. Since they often consider relatively long optical pulses, many of these studies are focused on the investigation of a quasi- ...

SPIE2020

Optically reconfigurable quasi-phase-matching in silicon nitride microresonators

Camille Sophie Brès, Jianqi Hu, Edgars Nitiss, Anton Stroganov

Quasi-phase-matching has long been a widely used approach in nonlinear photonics, enabling efficient parametric frequency conversions such as second-harmonic generation. However, in silicon photonics the task remains challenging, as materials best suited f ...

Nature Publishing Group2022

Vibration Suppression Through Variable Stiffness and Damping Structural Joints

Gennaro Senatore

This paper introduces a new semi-active strategy for vibration control of truss and frame structures equipped with variable stiffness and damping joints which consist of a shape memory polymer (SMP) core reinforced by an SMP-aramid composite skin. When the ...

2020

Weak nonlinearity for strong non-normality

François Gallaire, Edouard Boujo, Yves-Marie François Ducimetière

We propose a theoretical approach to derive amplitude equations governing the weakly nonlinear evolution of non-normal dynamical systems, when they experience transient growth or respond to harmonic forcing. This approach reconciles the non-modal nature of ...

Cambridge University Press2022

Deformation twinning mechanism in magnesium at the microscale: strain rate, temperature and orientation effects

Nicolò Maria Della Ventura

The project aims to validate some recent theoretical developments on the deformation twinning nucleation mechanism in HCP metals through small-scale mechanic experiments. To this end, a systematic investigation of the mechanical response of pure magnesium ...

EPFL2022

From Polarizability to Effective Permittivity of Time-Varying Materials

Romain Christophe Rémy Fleury, Theodoros Koutserimpas, Mohammad Sajjad Mirmoosa

In this talk, we describe excitation of time-varying dipolar particles (time-modulated meta-atoms) by external time-varying fields from a nonstationary and causal perspective. For a time-harmonic excitation, we introduce a complex-valued function, called t ...

IEEE2020

Ultrasoft Liquid Metal Elastomer Foams with Positive and Negative Piezopermittivity for Tactile Sensing

Yegor Piskarev

Soft, capacitive tactile (pressure) sensors are important for applications including human-machine interfaces, soft robots, and electronic skins. Such capacitors consist of two electrodes separated by a soft dielectric. Pressing the capacitor brings the el ...

WILEY-V C H VERLAG GMBH2020

Isogeometric Kirchhoff-Love shell patches in free and forced vibration of sinusoidally corrugated FG carbon nanotube-reinforced composite panels

Anastasios Vassilopoulos

Application of the isogeometric method is illustrated for free and forced vibration analyzes of sinusoidally corrugated functionally graded carbon nanotube reinforced composite (FG-CNTRC) thin panels. These panels can be used as a potential structure for m ...

ELSEVIER SCI LTD2022