Modeling of a Reciprocating Air Compressor using Energetic Macroscopic Representation

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In this paper, we consider experimental data available for graphene-based nanolubricants to evaluate their convective heat transfer performance by means of computational fluid dynamics (CFD) simulations. Single-phase models with temperature-dependent prope ...

This paper introduces a novel method for data-driven robust control of nonlinear systems based on the Koopman operator, utilizing Integral Quadratic Constraints (IQCs). The Koopman operator theory facilitates the linear representation of nonlinear system d ...

A new electrically driven gas booster is described as an alternative to the classical air-driven gas boosters known for their poor energetic efficiency. These boosters are used in small scale Hydrogen storage facilities and in refueling stations for Hydrog ...

Physics-informed machine learning (PIML) is a set of methods and tools that systematically integrate machine learning (ML) algorithms with physical constraints and abstract mathematical models developed in scientific and engineering domains. As opposed to ...

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Designing turbocompressors is a complex and challenging task, as it involves balancing conflicting objectives such as efficiency, stability, and robustness against manufacturing deviations. This paper proposes an integrated design methodology for turbocomp ...

Dynamic modeling of folding joints is critical for predicting dynamic behavior, optimizing design parameters, and developing control strategies for origami robots and machines. Although kinematics of the folded joints exists, little research describes thei ...

Code generation is an effective way to drive the complex system development in model-based systems engineering. Currently, different code generators are developed for different modeling languages to deal with the development of systems with multi-domain. T ...

Although robustness is an important consideration to guarantee the performance of designs under deviation, systems are often engineered by evaluating their performance exclusively at nominal conditions. Robustness is sometimes evaluated a posteriori throug ...

Modeling in neuroscience occurs at the intersection of different points of view and approaches. Typically, hypothesis-driven modeling brings a question into focus so that a model is constructed to investigate a specific hypothesis about how the system work ...

This paper presents a novel planar four-bar linkage compliant mechanism (called 4-RCC) based on four flexure-based Remote Center of Compliance (RCC) pivots. With particular configurations and dimensions, the beam shortening of the RCC pivots can compensate ...

This paper deals with the control-oriented modeling of a multilayered dielectric elastomer actuator based tube. The actuator is clamped at both sides and performs a radial displacement. The hyperelastic deformation and the viscoelastic performance, togethe ...

This paper investigates the problem of load-sharing optimization of gas compressors in the presence of uncertainty. The objective is to operate a set of compressor units in an energy-efficient way, while at the same time meeting a varying load demand. The ...

As an emerging technology in the era of Industry 4.0, digital twin is gaining unprecedented attention because of its promise to further optimize process design, quality control, health monitoring, decision and policy making, and more, by comprehensively mo ...

An analysis of single-stage centrifugal compressors supported on dynamic, gas lubricated bearings for driving vapor compression cycles suggests that the maximum feasible compressor power is limited, primarily by the bearing load capacity, in the range from ...

We present a frequency-domain modeling technique for second-order nonlinear metasurfaces. The technique is derived from the generalized sheet transition conditions (GSTCs), which have been so far mostly used for modeling linear metasurfaces. In this work, ...

In this article, three different modes of a novel integrated system would be evaluated by the application of high temperature Thermal Energy Storage (TES) to produce electricity, cooling, and freshwater. Freshwater is produced using the reverse osmosis (RO ...

System (2) for CO2 capture from a combustion engine (1) comprising an exhaust gas flow circuit (6) having an inlet end fluidly connected to an exhaust of the combustion engine, a heat exchanger circuit (12), a primary exhaust gas heat exchanger (H1) for tr ...

Inflating costs and emerging applications are spawning interests toward smaller and faster electric drives. The challenges of miniaturization make magnetic bearings more appealing, as they provide intrinsic high-speed capability and need virtually zero-mai ...

While it is well known that constant rotation induces linear dispersive effects in various fluid models, we study here its effect on long time nonlinear dynamics in the inviscid setting. More precisely, we investigate stability in the 3d rotating Euler equ ...

Modeling of a Reciprocating Air Compressor using Energetic Macroscopic Representation

Chat with Graph Search

Computational fluid dynamics simulations of the heat transfer properties of graphene-based nanolubricants and application to hydrodynamic lubrication

Koopman-based Data-driven Robust Control of Nonlinear Systems Using Integral Quadratic Constraints

Increasing the Energy Efficiency of Gas Boosters for Hydrogen Storage and for Refueling Stations

Physics-Informed Machine Learning for Modeling and Control of Dynamical Systems

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

An Integrated Approach to Designing Robust Turbocompressors on Gas Bearings Through Surrogate Modeling and Constrained Multi-Objective Optimization

Dynamic Modeling of an Origami Prismatic Joint

Code Generation Approach Supporting Complex System Modeling based on Graph Pattern Matching

Robust design using multiobjective optimisation and artificial neural networks with application to a heat pump radial compressor

Combining hypothesis- and data-driven neuroscience modeling in FAIR workflows

Rectilinear translation four-bar flexure mechanism based on four Remote Center Compliance pivots

Control-oriented modeling and analysis of tubular dielectric elastomer actuators dedicated to cardiac assist devices

Real-time optimization of load sharing for gas compressors in the presence of uncertainty

A comprehensive review of digital twin - part 1: modeling and twinning enabling technologies

Scale limitations of gas bearing supported turbocompressors for vapor compression cycles

Modeling of second-order nonlinear metasurfaces

Multi-objective optimization and exergoeconomic analysis of a continuous solar-driven system with PCM for power, cooling and freshwater production

System for co2 capture from internal combustion engine

Design of Compact Bearingless Disc Drive Systems

On the stabilizing effect of rotation in the 3d Euler equations