Publication

Thick PZT sol-gel films for pMUT transducers performances improvement

Paul Muralt, Florian Calame
2006
Conference Papers

Abstract

Piezoelectric micromachined ultrasonic transducers comprising a 10 mu m thick Si device layer and a 14 pro thick piezoelectric PZT layer were investigated. The PZT films were deposited by a sol-gel technique. The transverse piezoelectric coefficient was measured as -14.9 C/m(2). The electromechanical coupling increased stronger as expected with PZT thickness. The influence of both the shape and area of the top electrode on the device performance has been investigated. The electromechanical coupling coefficient (k) and quality factor (Q) have been measured in air and were fitted to an equivalent circuit model. The maximal k(2) was obtained as 7.8%.

Official source

https://infoscience.epfl.ch/entities/publication/5605b416-ae51-4240-b580-c709aead3d3b

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Paul Muralt, Florian Calame
2006
Conference Papers

Abstract

Official source

https://infoscience.epfl.ch/entities/publication/5605b416-ae51-4240-b580-c709aead3d3b

About this result

Related concepts (18)

Piezoelectricity

Piezoelectricity (ˌpiːzoʊ-,_ˌpiːtsoʊ-,_paɪˌiːzoʊ-, piˌeɪzoʊ-,_piˌeɪtsoʊ-) is the electric charge that accumulates in certain solid materials—such as crystals, certain ceramics, and biological matter such as bone, DNA, and various proteins—in response to applied mechanical stress. The word piezoelectricity means electricity resulting from pressure and latent heat. It is derived (an ancient source of electric current). The piezoelectric effect results from the linear electromechanical interaction between the mechanical and electrical states in crystalline materials with no inversion symmetry.

Thin film

A thin film is a layer of material ranging from fractions of a nanometer (monolayer) to several micrometers in thickness. The controlled synthesis of materials as thin films (a process referred to as deposition) is a fundamental step in many applications. A familiar example is the household mirror, which typically has a thin metal coating on the back of a sheet of glass to form a reflective interface. The process of silvering was once commonly used to produce mirrors, while more recently the metal layer is deposited using techniques such as sputtering.

Mechanical filter

A mechanical filter is a signal processing filter usually used in place of an electronic filter at radio frequencies. Its purpose is the same as that of a normal electronic filter: to pass a range of signal frequencies, but to block others. The filter acts on mechanical vibrations which are the analogue of the electrical signal. At the input and output of the filter, transducers convert the electrical signal into, and then back from, these mechanical vibrations.

Related publications (29)

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

On the use of Cramér-Rao Lower Bound for least-variance circuit parameters identification of Li-ion cells

Mario Paolone, Vladimir Sovljanski

Electrochemical Impedance Spectroscopy (EIS) and Equivalent Circuit Models (ECMs) are widely used to characterize the impedance and estimate parameters of electrochemical systems such as batteries. We use a generic ECM with ten parameters grouped to model ...

2024

Room-temperature quantum optomechanics using an ultralow noise cavity

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari, Guanhao Huang

At room temperature, mechanical motion driven by the quantum backaction of light has been observed only in pioneering experiments in which an optical restoring force controls the oscillator stiffness1,2. For solid-state mechanical resonators in which oscil ...

Nature Portfolio2024