Publications related to Two-dimensional polymeric structures and method for producing thereof

Related publications (35)

Soft Mechanochemistry of Disulfide-Crosslinked Polymer Networks

Mechanochemistry harnesses mechanical force to facilitate chemical reactions. Traditionally, the field of polymer mechanochemistry has used methods to activate chemical bonds, which use forces that are larger than those that are required to break a covalen ...

EPFL2024

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant-Greber

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Effects of Electrode Design on the Melt Electrowriting of Sinusoidal Structures

Biranche Tandon

Melt electrowriting is a microscale manufacturing technique that uses polymer-based melts to create fibrous structures. An electric field is used to stabilize a continuous molten jet, which is then written onto a substrate as a microscale fiber. Herein, it ...

WILEY-V C H VERLAG GMBH2023

Supramolecular Polymer Brushes

Friederike Katharina Metze

Thin polymer coatings present a method to modify the surface properties of underlying substrates. Polymer-coated surfaces have been used as anticorrosive materials, surfaces with special wetting properties, antifriction materials, and as materials for biom ...

EPFL2023

The influence of wood surface treatments with different biomolecules on dry and wet strength of linear friction welded joints

Yves Weinand

The moisture resistance of friction-welded wood joints can be improved by applying bio-based bonding additives. Several biomolecules including tannic acid, organosolv lignin from hardwood, kraft lignin from softwood, and derivates thereof, were investigate ...

TAYLOR & FRANCIS LTD2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Data-driven design of organic electronic materials

Jacob Terence Blaskovits

Singlet fission (SF) is a multiexciton-generating process whereby an excited state singlet (S1) is converted into two lower-energy triplets (T1). The inclusion of a SF-capable material into a photovoltaic device offers the potential for the absorption of p ...

EPFL2023

Murunskite - a new class of functional material

Davor Tolj

The subject of the present work is discovery and in-depth characterization of a new class of functional materials. Tuning of the bond polarity and orbital occupation with a goal of establishing balance between localization and delocalization of electrons - ...

EPFL2023

Mechanistic Insight into Supramolecular Polymerization in Water Tunable by Molecular Geometry

Lukas Pfeifer

Supramolecular self-assembly in water based on non-covalent bonding is attracting major attention due to the potential of hydrogels and aqueous polymers in biomedical applications. Although supramolecular polymerization in organic solvents is well establis ...

CHINESE CHEMICAL SOC2022

Enhancement of Pressure-Sensitive Adhesive by CO2 Laser Treatment

Dario Floreano, Jun Shintake, Yegor Piskarev, Vivek Ramachandran

Pressure-sensitive adhesives (PSAs) are polymeric films that can be adhered to and detached from surfaces without leaving residue. Researchers are looking to enhance the bond strength between PSAs and different substrates. It can be achieved by tuning PSA' ...

2022

cell2mol: encoding chemistry to interpret crystallographic data

Anne-Clémence Corminboeuf, Rubén Laplaza Solanas, Sergio Vela Llausi, Yuri Cho

The creation and maintenance of crystallographic data repositories is one of the greatest data-related achievements in chemistry. Platforms such as the Cambridge Structural Database host what is likely the most diverse collection of synthesizable molecules ...

NATURE PORTFOLIO2022

Phase transition of layer-stacked borophene under pressure

Oleg Yazyev, Quansheng Wu

The 8-Pmmn borophene, a boron analog of graphene, hosts tilted and anisotropic massless Dirac fermion quasiparticles owing to the presence of a distorted graphenelike sublattice. First-principles calculations show that stacked 8-Pmmn borophene is transform ...

AMER PHYSICAL SOC2022

Simulating Microswimmers Under Confinement With Dissipative Particle (Hydro) Dynamics

Ignacio Pagonabarraga Mora

In this work we study microwimmers, whether colloids or polymers, embedded in bulk or in confinement. We explicitly consider hydrodynamic interactions and simulate the swimmers via an implementation inspired by the squirmer model. Concerning the surroundin ...

FRONTIERS MEDIA SA2022

Mechanical Activation of Chemical Bonds at Polymer Interfaces

Julian Nicolas Bleich

Polymer brushes are a specific class of polymer thin films in which each chain is tethered to the underlying substrate via one chain end. In sufficiently densely grafted assemblies, the individual polymer chains are forced into an extended chain conformati ...

EPFL2021

Resin Transfer molding of High-Fluidity Polyamide-6 with modified Glass-Fabric preforms

Véronique Michaud, Baris Çaglar, Damiano Salvatori, Robin Samuel Trigueira, Colin Gomez

In Resin Transfer Molding (RTM), resin precursors of thermoset or, more recently, thermoplastic polymers are generally employed, raising issues related to the chemical reaction taking place during and after part processing. In this study, already polymeriz ...

2021

Renewable monomer and polymer thereof

Jeremy Luterbacher, Stefania Bertella, Lorenz Perry Manker, Graham Reid Dick

Described is a compound having the structure (I), (II) or (V), Formulae(I), (II), (V), wherein R1 is -H, -CH2OH or -CH(OH)CH2OH; R2 is -H, -OH, or -CH2OH; R3 is -H, -OH, or -CH2OH; n is 0 or 1; p is 0 or 1; R10 is hydrogen or a hydrocarbon moiety with 1 to ...

2021

Hybridization of Synthetic Humins with a Metal-Organic Framework for Precious Metal Recovery and Reuse

Wendy Lee Queen, Olga Trukhina, Claudia Esther Avalos, Till Marian Schertenleib, Jordi Espin Marti, Vikram Vinayak Karve

The number of synthetic strategies used to functionalize MOFs with polymers is rapidly growing; this stems from the knowledge that non-native polymeric guests can significantly boost MOF performance in a number of desirable applications. The current work p ...

AMER CHEMICAL SOC2021

Using collective knowledge to assign oxidation states of metal cations in metal-organic frameworks

Berend Smit, Seyedmohamad Moosavi, Kevin Maik Jablonka, Daniele Ongari

Knowledge of the oxidation state of metal centres in compounds and materials helps in the understanding of their chemical bonding and properties. Chemists have developed theories to predict oxidation states based on electron-counting rules, but these can f ...

NATURE RESEARCH2021

On the relevance of P poisoning in real-world DOC aging

Oliver Kröcher, Davide Ferri

Understanding the real aging of Diesel oxidation catalysts (DOC) is key to predict their useful lifetime. This work comprises a detailed study of a commercial DOC in its unused state and after use in vehicle for 288,000 km. The activity of the samples was ...

ELSEVIER2021