Publications related to Mechanical and electronic properties of vanadium oxide nanotubes

Related publications (37)

Additive Manufacturing of Metal Matrix Composites for Space Applications

Titanium-based Metal Matrix Composites (MMCs) offer remarkable mechanical, thermal, and corrosion resistance properties and are of high interest to several industrial sectors, including aerospace. One of the main commercial drawbacks of these materials, wh ...

EPFL2025

Optical Spatial Dispersion Via Wannier Interpolation

Stepan Tsirkin

We present a numerical implementation, based on Wannier interpolation, of a Kubo-Greenwood formalism for computing the spatially dispersive optical conductivity in crystals at first order in the wave vector of light. This approach is more efficient than di ...

AMER PHYSICAL SOC2025

Modulation of Graphene Oxidation Using Substrate-Induced Electron-Hole Puddles for Advancing Molecular Separation

Kumar Varoon Agrawal, Shiqi Huang, Heng-Yu Chi, Kuang-Jung Hsu, Yueqing Shen, Ranadip Goswami

Tuning the reactivity of graphene enables molecular-level engineering of the lattice, achieving desired chemical and structural properties through functionalization, doping, and etching. Atom-thin graphene film hosting Å-scale pores, with capability to dif ...

2025

Engineering Symmetry Breaking Interfaces by Nanoscale Structural-Energetics in Orthorhombic Perovskite Thin Films

Duncan Thomas Lindsay Alexander, Bernat Mundet

The atomic configuration of phases and their interfaces is fundamental to materials design and engineering. Here, we unveil a transition metal oxide interface, whose formation is driven by energetic influences─epitaxial tensile strain versus oxygen octahed ...

2025

Controlling crystal cleavage in focused ion beam shaped specimens for surface spectroscopy

Philip Johannes Walter Moll, Matthias Carsten Putzke

Our understanding of quantum materials is commonly based on precise determinations of their electronic spectrum by spectroscopic means, most notably angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy. Both require atomicall ...

Aip Publishing2024

Nanolithography of the nanocorral structure of chemisorbed oxygen atoms on the graphitic lattice

Kumar Varoon Agrawal, Shaoxian Li

Controlled atomic patterning is an attractive tool to fine tune properties of graphitic lattice. Several O-functionalized derivatives of graphitic lattice have been widely studied, e.g., graphene oxide, reduced graphene oxide, and functionalized carbon nan ...

Pergamon-Elsevier Science Ltd2024

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

FIB-Fabrication of Resonating Cantilevers to Explore Symmetry-Breaking in Quantum Materials

Amelia Emily-Kay Estry

Scientific progress and technological advancements on novel materials are often deterred by limitations on size and quality of samples. Materials with electronic phenomena attractive for applications, and presenting many open scientific questions, are ofte ...

EPFL2023

Nanoindentation of embedded particles

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoind ...

SPRINGER HEIDELBERG2023

Shear strength and shear stiffness analysis of compacted Wyoming-type bentonite

Alessio Ferrari

Wyoming-type bentonite is one of the materials to be used as part of the Engineered Barrier System (EBS) in deep geological disposal facilities for the safe disposal of spent nuclear fuel.In the KBS-3 type repository, the canisters containing the spent fue ...

ELSEVIER2023

A diamond spin qubit scanning probe microscope

Dinesh Kevin Mathais Pinto

The properties of a physical system only exist in relation to its environment. This thesis presents the development of a novel spin qubit scanning probe microscope operating over a wide range of environmental conditions. The qubit, which sits at the heart ...

EPFL2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

On-Demand Cross-Linkable Bottlebrush Polymers for Voltage- Driven Artificial Muscles

Frank Nüesch, Francis Owusu, Yeerlan Adeli

Dielectric elastomer actuators (DEAs) generate motion resembling natural muscles in reliability, adaptability, elongation, and frequency of operation. They are highly attractive in implantable soft robots or artificial organs. However, many applications of ...

AMER CHEMICAL SOC2023

Large Orbital Moment of Two Coupled Spin-Half Co Ions in a Complex on Gold

Stefano Rusponi, Chao Li, Boris Sorokin

The magnetic propertiesof transition-metal ions aregenerallydescribed by the atomic spins of the ions and their exchange coupling.The orbital moment, usually largely quenched due the ligand field,is then seen as a perturbation. In such a scheme, S = 1/2 io ...

AMER CHEMICAL SOC2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

Image scanning microscopy with a doughnut beam: signal strength and integrated intensity

Giorgio Tortarolo

We discuss the effects of image scanning microscopy using doughnut beam illumination on the properties of signal strength and integrated intensity. Doughnut beam illumination can give better optical sectioning and background rejection than Airy disk illumi ...

Optica Publishing Group2023

Towards near-atomic resolution imaging of microsecond nanoscale dynamics

Gabriele Bongiovanni

Time-resolved electron microscopy has made significant progress in recent years, with some groups now working on instruments that offer attosecond temporal resolution. While much of the research in the field revolves around the improvement of temporal reso ...

EPFL2023

Thermophysical and thermomechanical properties of basalt-phenolic FRP rebars under high temperature

Thomas Keller, Hongwei Zhu

An experimental investigation was conducted on the thermophysical and thermomechanical properties of phenolic-basalt fiber-reinforced polymer (P-BFRP) rebars subjected to high temperature. As a comparison, vinylBFRP (V-BFRP) and epoxy-BFRP (E-BFRP) rebars ...

ELSEVIER SCI LTD2022

Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb3Sn Cables

Pierluigi Bruzzone, Vincenzo D'Auria

This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the spray ...

MDPI2022