DTT toroidal field conductor samples test in Sultan: DC and AC characterization

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Nuclear fusion provides a potentially unlimited and clean energy source which motivates the development of fusion power plants. The tokamak is one of the most promising concepts for a future reactor, confining the fusion plasmas in a torus using strong mag ...

Power exhaust is a crucial issue for future fusion reactors. Divertor detachment and the required power dissipation fractions of about 95% are foreseen to be achieved by impurity seeding. In a tokamak, at high seeding levels the radiation often concentrate ...

The transition from planar to three-dimensional (3D) magnetic nanostructures represents a significant advancement in both fundamental research and practical applications, offering vast potential for next-generation technologies like ultrahigh-density stora ...

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

For the EU DEMO conductor testing, a temperature sensor based on Fiber Bragg Grating (FBG) optical fiber is studied at the EPFL Swiss Plasma Center. The SULTAN test facility has been upgraded to use fiber optic sensor for temperature monitoring and quench ...

Nuclear fusion, with its potential to provide a nearly unlimited energy source, has inspired scientists to work on the development of fusion power plants. Among the various devices designed to harness nuclear fusion, the tokamak confines the fusion fuel, w ...

Plasmas with negative triangularity (NT) shape have been recently shown to be able to achieve H-mode levels of confinement in L-mode, avoiding detrimental edge localised modes. Therefore, this plasma geometry is now studied as a possible viable option for ...

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

Negative triangularity (NT) scenarios in TCV have been compared to positive triangularity (PT) scenarios using the same plasma shapes foreseen for divertor tokamak test tokamak operations. The experiments provided a NT/PT L-mode pair and a PT H-mode with d ...

In recent years, negative triangularity (NT) has emerged as a potential high-confinement L-mode reactor solution. In this work, detachment is investigated using core density ramps in lower single null Ohmic L-mode plasmas across a wide range of upper, lowe ...

Two reduced models for predicting detachment onset and divertor reattachment times are validated on MAST Upgrade (MAST-U). These models are essential for future tokamak reactor design, providing rapid calculations based primarily on engineering parameters. ...

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

An optimized plasma current ramp-down strategy is critical for safe and fast termination of plasma discharges in a tokamak demonstration fusion reactor (DEMO), both in planned and emergency scenarios, avoiding plasma disruptions and excessive heat loads to ...

While much about Alfvén eigenmode (AE) stability has been explored in previous and current tokamaks, open questions remain for future burning plasma experiments, especially regarding exact stability threshold conditions and related isotope effects; the lat ...

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

The mission of WEST (tungsten-W Environment in Steady-state Tokamak) is to explore long pulse operation in a full tungsten (W) environment for preparing next-step fusion devices (ITER and DEMO) with a focus on testing the ITER actively cooled W divertor in ...

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

DTT toroidal field conductor samples test in Sultan: DC and AC characterization

Chat with Graph Search

Impurity-seeded detachment in conventional and optimized TCV divertor geometry

X-point radiation: From discovery to potential application in a future reactor

2025 roadmap on 3D nanomagnetism

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Global fluid simulations of plasma turbulence in stellarators

Quench Detection and Temperature Measurement With Fiber Optic Sensors

Investigation of scrape-off layer and divertor transport using infrared thermography and SOLPS-ITER simulations

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Comparison of detachment in Ohmic plasmas with positive and negative triangularity

Validating reduced models for detachment onset and reattachment times on MAST-U

Re-design of EU DEMO with a low aspect ratio

Scenario optimization for the tokamak ramp-down phase in RAPTOR. Part B: safe termination of DEMO plasmas

Isotope effects and Alfvén eigenmode stability in JET H, D, T, DT, and He plasmas

DEMO toroidal field coil fast discharge unit integration studies

WEST full tungsten operation with an ITER grade divertor

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background