Publications related to A Modified Formula for Distance Relaying of Tapped Transmission Lines with Grounded Neutrals

Related publications (32)

DC Power Distribution Networks with Direct Current Transformers

The shift towards DC power distribution networks, enabled by power electronics technologies, is changing the nature of electrical power systems. Nowadays, DC power distribution networks can effectively support the high penetration of distributed energy res ...

EPFL2024

High-frequency response of a hemispherical grounding electrode

Farhad Rachidi-Haeri, Marcos Rubinstein, Antonio Sunjerga

The lightning discharge current is characterized by a high-frequency spectrum extending from DC to about 10 MHz. The calculation of the grounding impedance is one of the most important aspects of designing lightning protection systems. The search for analy ...

Elsevier2024

Partial discharge localization in power transformer tanks using machine learning methods

Farhad Rachidi-Haeri, Marcos Rubinstein, Hamidreza Karami

This paper presents a comparison of machine learning (ML) methods used for three-dimensional localization of partial discharges (PD) in a power transformer tank. The study examines ML and deep learning (DL) methods, ranging from support vector machines (SV ...

Nature Publishing Group2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Assessment of the Feasibility of Applying the Electromagnetic Time Reversal Theory to Locate Defects in Grounding Electrodes

Farhad Rachidi-Haeri, Marcos Rubinstein, Hamidreza Karami, Rafael Silva Alipio

In recent years, the electromagnetic time reversal (EMTR) theory has been successfully applied for locating various sources of disturbances, such as short-circuit faults, in power systems. In this paper, a theoretical analysis of the feasibility of applyin ...

2023

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

IOP Publishing Ltd2023

A review of the modeling approaches of the lightning M-component with special attention to their current and electric field characteristics

Farhad Rachidi-Haeri, Marcos Rubinstein, Mohammad Azadifar, Carlo Alberto Nucci

In this paper, we present the characteristics of current, electric fields and modeling approaches of lightning M-component mode of charge transfer. We consider both the classical M-components (occurring after return strokes) and M-component-type ICC (Initi ...

Elsevier2023

Enablers for Overcurrent Capability of Silicon-Carbide-Based Power Converters: An Overview

Elison de Nazareth Matioli

With the increase in penetration of power electronic converters in the power systems, a demand for overcurrent/ overloading capability has risen for the fault clearance duration. This article gives an overview of the limiting factors and the recent technol ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Analysis and Design for Medium Voltage Dual Active Bridge Converter Based on Series-Connected SiC MOSFETs

Chengmin Li

In this article, a series-connected SiC MOSFETs-based medium voltage (MV) dual active bridge (DAB) converter featuring a lowvoltage difference amongdevices and high efficiency is proposed. In the developed DAB converter, the zero voltage switching-on chara ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Influence of a lossy ground on the lightning performance of overhead transmission lines

Farhad Rachidi-Haeri, Rafael Silva Alipio

This paper investigates the impact of incorporating both displacement currents and frequency-dependent soil parameters in the calculation of the ground-return impedance for the determination of the backflashover rate of 138 kV and 230 kV overhead transmiss ...

Elsevier2023

Coordinated day-ahead dispatch of multiple power distribution grids hosting stochastic resources: An ADMM-based framework

Mario Paolone, Rahul Kumar Gupta, Sherif Alaa Salaheldin Fahmy

This work presents an optimization framework to aggregate the power and energy flexibilities in an interconnected power distribution systems. The aggregation framework is used to compute the day-ahead dispatch plans of multiple and interconnected distribut ...

Elsevier2022

High frequency IGCT operation for DC transformer

Gabriele Ulissi

In spite of the dominance of ac technology for the vast majority of power transmission and distribution since the late 19th century, the past decades have seen an increase in use of dc electrical power. In particular, this has been the case both in high vo ...

EPFL2022

A Lightweight Device for Energy Harvesting from Power Lines with a Fixed-Wing UAV

Dario Floreano, William John Stewart

Modern UAVs (Unmanned Aerial Vehicles) suffer from restrictions in flight range and time due to battery capacity limitations. One way to overcome these limitations is to harvest energy from overhead power lines. A growing body of scientific literature has ...

IEEE2022

Partial discharge localization in power transformers using acoustic time reversal

Florent Quentin Aviolat, Farhad Rachidi-Haeri, Marcos Rubinstein, Mohammad Azadifar, Hamidreza Karami

The localization of partial discharges (PD) is important to monitor the conditioning of high voltage insulator materials. One of the key components in power grids is the high power transformer. Localization of PDs in these pieces of equipment can increase ...

Elsevier2022

Direct Current Transformer Impact on the DC Power Distribution Networks

Drazen Dujic, Renan Pillon Barcelos

The latest developments in dc transformer technology are enabling larger and more complex dc power distribution systems. However, the literature is scarce regarding the investigation and quantification of its impact on the dc grid. Therefore, this paper an ...

2022

Interaction of lightning-generated electromagnetic fields with overhead and underground cables

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci

In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...

IET2022

Three-Dimensional FDTD-Based Simulation of Induced Surges in Secondary Circuits Owing to Primary-Circuit Surges in Substations

Farhad Rachidi-Haeri, Marcos Rubinstein, Akiyoshi Tatematsu

Currently, plenty of sensitive electronic devices are installed in secondary circuits in substations and power plants. Electronic devices may malfunction and become damaged owing to electromagnetic disturbances caused mainly by lightning surges. To protect ...

2021

Superconductors for power applications: an executable and web application to learn about resistive fault current limiters

Bertrand Dutoit, Bertrand Dutoit, Francesco Grilli, Nicolo' Riva

High-temperature superconductors (HTS) can be superconducting in liquid nitrogen (77 K) at atmospheric pressure, which holds immense promises for our future such as nuclear fusion, compact medical devices and efficient power applications. In a power system ...

2021

Medium Voltage Impedance and Admittance Measurement and System Identification Techniques

Marko Petkovic

The recent trend of an increasing share of renewable energy sources in modern power systems, as well as the integration of power electronics equipment, is shaping the requirements for stable grid infrastructure. These requirements mainly come from the stab ...

EPFL2021

An Effective EMTR-Based High-Impedance Fault Location Method for Transmission Lines

Farhad Rachidi-Haeri

This article summarizes the electromagnetic time-reversal (EMTR) technique for fault location, and further numerically validates its effectiveness when the fault impedance is negligible. In addition, a specific EMTR model considering the fault impedance is ...

2021