Transport scaling in interchange-driven toroidal plasmas

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Nuclear fusion provides a potentially unlimited and clean energy source which motivates the development of fusion power plants. The tokamak is one of the most promising concepts for a future reactor, confining the fusion plasmas in a torus using strong mag ...

The density limit in strongly-shaped negative triangularity (NT) discharges is studied experimentally in the DIII-D tokamak. Record-high Greenwald fractions fG are obtained, using gas puff injection only, with values up to near 2, where fG is defined as th ...

When a plasma disrupts in a tokamak, significant heat and electromagnetic loads are deposited onto the surrounding device components. These forces scale with plasma current and magnetic field strength, making disruptions one of the key challenges for futur ...

Probing the neutral gas distribution at the edge of magnetic confinement fusion devices is critical for plasma exhaust studies. In the TCV tokamak, a set of ASDEX-type hot ionization pressure gauges (APGs) has been installed for fast, in situ measurements ...

Power exhaust is a crucial issue for future fusion reactors. Divertor detachment and the required power dissipation fractions of about 95% are foreseen to be achieved by impurity seeding. In a tokamak, at high seeding levels the radiation often concentrate ...

This work examines the separatrix and Scrape-off-Layer (SOL) characteristics in three scenarios on JET: the Quasi-Continuous Exhaust (QCE) regime, the ITER Baseline scenario, and the X-point Radiator (XPR) regime. All three scenarios are potentially compat ...

The Poisson cluster rainfall generation model has been underutilized in urban hydrological simulations due to challenges in reproducing fine-scale extreme precipitation. This study addresses this issue by comprehensively validating four variants of Poisson ...

The problem of avoiding saturation of the coil currents is critical in large tokamaks with superconducting coils like ITER. Indeed, if the current limits are reached, a loss of control of the plasma may lead to a major disruption. Therefore, a current limi ...

Increasing environmental concerns drive interest in sustainable solutions across various fields. Vehicle sharing systems such as one-way station-based bike sharing systems (BSSs) offer one such solution in transportation, although they pose operational cha ...

We discuss how the combination of experimental observations and rapid modeling has enabled to improve understanding of the tokamak ramp-down phase in ASDEX Upgrade. A series of dedicated experiments has been performed, to disentangle the effect of individu ...

Electron cloud continues to be one of the main limiting factors of the Large Hadron Collider (LHC), the biggest accelerator at CERN. These clouds form in the beam chamber when positively charged particles are passing through and cause unwanted effects in b ...

The experimental fusion reactor ITER will feature two (or three) heating neutral beam injectors (NBI) capable of delivering 33(or 50) MW of power into the plasma. A NBI consists of a plasma source for production of negative ions (extracted negative ion cur ...

MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), and these external sources of super-Alfv & eacute;nic deuterium fast-ions provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in ...

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

The impact of plasma shaping on the properties of high density H-mode scrape-off layer (SOL) profiles and transport at the outer midplane has been investigated on Tokamaka configuration variable. The experimental dataset has been acquired by evolving the u ...

Reinforcement learning (RL) has shown promising results for real-time control systems, including the domain of plasma magnetic control. However, there are still significant drawbacks compared to traditional feedback control approaches for magnetic confinem ...

The implementation of three-dimensional magnetic fields, such as the ones of stellarators, in the GBS code (Ricci et al 2012 Plasma Phys. Control. Fusion54 124047; Giacomin et al 2022 J. Comput. Phys.464 111294) is presented, and simulation results are dis ...

The ubiquitous mode is investigated in the linear regime for the first time using a global gyrokinetic model. These modes are driven by the density gradient in trapped electron population but with mode frequency in the ion diamagnetic drift direction, in c ...

This paper establishes a mean-field equation set and an energy theorem to provide a theoretical basis in view of the development of self-consistent, physics-based turbulent transport models for mean-field transport codes. A rigorous averaging procedure ide ...

In recent years a strong effort has been made to investigate disruption avoidance schemes in order to aid the development of integrated operational scenarios for ITER. Within the EUROfusion programme the disruptive H-mode density limit (HDL) has been studi ...

Transport scaling in interchange-driven toroidal plasmas

Chat with Graph Search

Impurity-seeded detachment in conventional and optimized TCV divertor geometry

Operation Above the Greenwald Density Limit in High Performance DIII-d Negative Triangularity Discharges

Plasma state monitoring and disruption characterization using multimodal VAEs

Neutral pressure measurement in TCV tokamak using ASDEX-type pressure gauges

X-point radiation: From discovery to potential application in a future reactor

Impact of the Plasma Boundary on Machine Operation and the Risk Mitigation Strategy on Jet

Context-Specific Selection of Poisson cluster rainfall models for accurate urban hydrological simulations

Implementation of an Iter-relevant Qp-based Current Limit Avoidance Algorithm in the Tcv Tokamak

Bike sharing systems: The impact of precise trip demand forecasting on operational efficiency in different city structures

Scenario optimization for the tokamak ramp-down phase in RAPTOR: A. Analysis and model validation on ASDEX Upgrade

Characterization of Transverse Instabilities Driven by Electron Cloud

Optimizing the ITER NBI ion source by dedicated RF driver test stand

Overview of fast particle experiments in the first MAST Upgrade experimental campaigns

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

The effect of plasma shaping on high density H-mode SOL profiles and fluctuations in TCV

Towards practical reinforcement learning for tokamak magnetic control

Global fluid simulation of plasma turbulence in stellarators with the GBS code

Global gyrokinetic study of density gradient driven instability in tokamaks: the ubiquitous mode

Mean-field transport equations and energy theorem for plasma edge turbulent transport

Disruption avoidance and investigation of the H-Mode density limit in ASDEX Upgrade