Publications related to Thermomechanical constitutive modeling of the Kirigami-inspired shape memory alloy

Related publications (11)

Wafer-Level Microfabrication of Zipping Electrohydraulic Actuators for Soft Milli-Robots

Herbert Shea, Florian Fernand Hartmann, Shai-Shmuel Shmulevich

Miniaturizing soft robots is often limited by scaling down actuators while keeping high energy density and good response time. In this work we demonstrate the wafer-level microfabrication of electrostatic zipping soft actuators, similar to peano-HASELs. Th ...

IEEE2025

Effect of precipitates on martensite formation and shape memory effect of FeMnSi-based shape memory alloys fabricated by laser powder bed fusion

Christian Leinenbach, Irene Ferretto

The initial and evolving microstructure during the tensile test of two Fe-17Mn-5Si-10Cr-4Ni shape memory alloys, with and without V, C and fabricated by laser powder bed fusion are investigated and compared via electron backscattered diffraction, transmiss ...

ELSEVIER SCIENCE SA2025

A Multiaxial Plasticity Model with Softening for Simulating Inelastic Cyclic Local Buckling in Steel Beam Columns Using Fiber Elements

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Diego Isidoro Heredia Rosa

This paper proposes a new effective multiaxial plasticity model to simulate inelastic cyclic buckling in steel frame members. The proposed constitutive formulation is expressed within the framework of rate-independent metal plasticity and replicates the pr ...

American Society of Civil Engineers (ASCE)2025

Characterization of low-temperature creep and stress relaxation of an iron-based shape memory alloy (Fe-SMA) using in-situ synchrotron diffraction

Christian Leinenbach, Meet Jaydeepkumar Oza

Iron-based shape memory alloys (Fe-SMAs) are e-merging materials with extensive application in civil structures owing to their unique properties, including the shape memory effect. However, it is crucial to understand the time dependent behavior of Fe-SMAs ...

ELSEVIER SCI LTD2024

Acoustic emission signature of martensitic transformation in laser powder bed fusion of Ti6Al4V-Fe, supported by operando X-ray diffraction

Roland Logé, Jamasp Jhabvala, Mathijs Pieter van der Meer, Milad Hamidi Nasab, Reza Esmaeilzadeh, Claire Navarre, Charlotte Léopoldine de Formanoir de la Cazerie, Lucas Maximilian Schlenger

This study focuses on investigating Acoustic Emission (AE) monitoring in the Laser Powder Bed Fusion (LPBF) process, using premixed Ti6Al4V-(x wt%) Fe, where x = 0, 3, and 6. By employing a structure-borne AE sensor, we analyze AE data statistically, uncov ...

2024

Effect of thermomechanical training on recovery stress of Fe-based shape memory alloy

Christian Leinenbach

This research explores the impact of thermomechanical treatment on the recovery stress induced by the shape memory effect in an Fe-based shape memory alloy with the composition of Fe-17Mn-5Si-10Cr-4Ni-1(V,C) wt.%. Fe-based shape memory alloys have gained c ...

Elsevier B.V.2024

Simulation and experimental characterization of VC precipitation and recovery stress formation in an FeMnSi-based shape memory alloy

Christian Leinenbach

In this study, TC-PRISMA was employed to simulate the precipitation (number density and radius) of an FeMnSi-based shape memory alloy (FeMnSi-SMA), with a chemical composition of Fe-17Mn-5Si-10Cr-4Ni-1(V, C) (wt%), during one-step and two-step aging proces ...

2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

Improve the Time Response of Shape Memory NiTi Sheets Using Highly Conductive Elastomer Layers

Yves Perriard, Thomas Guillaume Martinez, Sofia Lydia Ntella, Marjan Ghorbani

Shape Memory Alloys (SMAs) have gained significant attention due to their high work density in order to fabricate compact and lightweight actuators. However, the major drawback of thermally activated SMAs is the time that takes for these materials to cool ...

IEEE2022

Effects of resonator geometry and substrate stiffness on the tunability of a deformable microwave metasurface

Romain Christophe Rémy Fleury

Tunable metasurfaces can shift their resonant frequency through different approaches, one of which is applying mechanical deformations. Here, we show the effects of two key factors on the tunability of deformable metasurfaces; the resonator geometry and su ...

2022

Solvent-Free Synthesis and Processing of Conductive Elastomer Composites for Green Dielectric Elastomer Transducers

Frank Nüesch

Stretchable electrodes are more suitable for dielectric elastomer transducers (DET) the closer the mechanical characteristics of the electrodes and elastomer are. Here, a solvent-free synthesis and processing of conductive composites with excellent electri ...

WILEY-V C H VERLAG GMBH2022