Publications related to A facile strategy for the modification of polyethylene substrates with non-fouling, bioactive poly(poly(ethylene glycol) methacrylate) brushes

Related publications (38)

Supramolecular Polymer Brushes Grafted via Atom Transfer Radical Polymerization from Surfaces Presenting Non-covalent, Host-Guest Complex-Based Initiators

Harm-Anton Klok, Friederike Katharina Metze

This paper describes the synthesis of supramolecular polymer brushes via surface-initiated polymerization from adamantane-functionalized initiators that are noncovalently bound to beta-cyclodextrin- or cucurbit[7]uril-modified substrates. Surface-initiated ...

American Chemical Society2025

Tandem catalysis enables chlorine-containing waste as chlorination reagents

Paul Joseph Dyson, Xinbang Wu, Mingyang Liu

Chlorinated compounds are ubiquitous. However, accumulation of chlorine-containing waste has a negative impact on human health and the environment due to the inapplicability of common disposal methods, such as landfill and incineration. Here we report a su ...

Nature Portfolio2024

The Structural Dispersity of Oligoethylene Glycol-Containing Polymer Brushes Determines Their Interfacial Properties

Harm-Anton Klok

Ought to their bioinert properties and facile synthesis, poly[(oligoethylene glycol)methacrylate]s (POEGMAs) have been raised as attractive alternatives to poly(ethylene glycols) (PEGs) in an array of (bio)material applications, especially when they are ap ...

Amer Chemical Soc2024

Soft Mechanochemistry of Disulfide-Crosslinked Polymer Networks

Zhao Meng

Mechanochemistry harnesses mechanical force to facilitate chemical reactions. Traditionally, the field of polymer mechanochemistry has used methods to activate chemical bonds, which use forces that are larger than those that are required to break a covalen ...

EPFL2024

Surface passivation and functionalisation for mass photometry

Laila Abdelaziz Abdelmoniem Elfeky, Suliana Manley, Jenny Sülzle

Interferometric scattering (iSCAT) microscopy enables the label-free observation of biomolecules. Consequently, single-particle imaging and tracking with the iSCAT-based method known as mass photometry (MP) is a growing area of study. However, establishing ...

Wiley2024

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant-Greber

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Supramolecular Polymer Brushes Grown by Surface-Initiated Atom Transfer Radical Polymerization from Cucurbit[7]uril-based Non-Covalent Initiators

Harm-Anton Klok, Friederike Katharina Metze

Polymer brushes are densely grafted, chain end-tethered assemblies of polymers that can be produced via surface-initiated polymerization. Typically, this is accomplished using initiators or chain transfer agents that are covalently attached to the substrat ...

Wiley-VCH Verlag GmbH2023

Opportunities, Challenges, and Pitfalls in Making, Characterizing, and Understanding Polymer Brushes

Harm-Anton Klok

Polymer brushes have been theoretically described, their behavior under diverse conditions has been modeled, and their preparation via surface-initiated polymerizations (SIPs) has been progressively refined. However, despite three decades of research endea ...

American Chemical Society2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Supramolecular Polymer Brushes

Friederike Katharina Metze

Thin polymer coatings present a method to modify the surface properties of underlying substrates. Polymer-coated surfaces have been used as anticorrosive materials, surfaces with special wetting properties, antifriction materials, and as materials for biom ...

EPFL2023

Lignin Hydrogenolysis: Phenolic Monomers from Lignin and Associated Phenolates across Plant Clades

Jeremy Luterbacher

The chemical complexity of lignin remains a major challengeforlignin valorization into commodity and fine chemicals. A knowledgeof the lignin features that favor its valorization and which plantsproduce such lignins can be used in plant selection or to eng ...

AMER CHEMICAL SOC2023

Tandem effect of Ag@C@Cu catalysts enhances ethanol selectivity for electrochemical CO2 reduction in flow reactors

Andreas Züttel, Wen Luo, Liping Zhong, Thi Ha My Pham, Mo Li, Jie Zhang, Youngdon Ko, Cedric David Koolen

CO-selective metals (e.g., Ag) on Cu catalysts improve the selec-tivity of multi-carbon (C2+) products in electrochemical CO2 reduc-tion. However, the origin of the improvement remains unclear due to the convolution of tandem and interface effects. Here, A ...

ELSEVIER2022

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

An amorphous poly(urethane-urea) copolymer composed of 70 wt% poly(ethylene oxide) (PEO) soft segments (SS) (Mw = 2000 g mol−1) and 30 wt% cycloaliphatic hard segments (HS) was subjected to in-situ X-Rays during tensile deformation. Mechanical hardening at ...

2021

Enhancement of Pressure-Sensitive Adhesive by CO2 Laser Treatment

Dario Floreano, Jun Shintake, Yegor Piskarev, Vivek Ramachandran

Pressure-sensitive adhesives (PSAs) are polymeric films that can be adhered to and detached from surfaces without leaving residue. Researchers are looking to enhance the bond strength between PSAs and different substrates. It can be achieved by tuning PSA' ...

2022

Light-Activated, Bioadhesive, Poly(2-hydroxyethyl methacrylate) Brush Coatings

Dominique Pioletti, Harm-Anton Klok, Jian Wang, Peyman Karami, Nariye Cavusoglu Ataman

Rapid adhesion between tissue and synthetic materials is relevant to accelerate wound healing and to facilitate the integration of implantable medical devices. Most frequently, tissue adhesives are applied as a gel or a liquid formulation. This manuscript ...

American Chemical Society2020