Publications related to Determination of crystal growth rates during rapid solidification of polycrystalline aluminum by nano-scale spatio-temporal resolution in situ transmission electron microscopy

Related publications (42)

Passivating oxidation behavior of Ti0.12Al0.21B0.67 coatings investigated by scanning transmission electron microscopy and chemical environment dependent density functional theory simulations

The oxidation behavior of stoichiometric Ti0.12Al0.21B0.67 coatings is investigated by scanning transmission electron microscopy (STEM) after oxidizing for 1, 4 and 8 h at 700 degrees C and at 800 and 900 degrees C. In the as deposited state, a similar to ...

PERGAMON-ELSEVIER SCIENCE LTD2025

Engineering Symmetry Breaking Interfaces by Nanoscale Structural-Energetics in Orthorhombic Perovskite Thin Films

Duncan Thomas Lindsay Alexander, Bernat Mundet

The atomic configuration of phases and their interfaces is fundamental to materials design and engineering. Here, we unveil a transition metal oxide interface, whose formation is driven by energetic influences─epitaxial tensile strain versus oxygen octahed ...

2025

A Multiscale Bayesian Approach to Quantification and Denoising of Energy-dispersive X-ray Data

Cécile Hébert, Duncan Thomas Lindsay Alexander, Pau Torruella Besa

Energy dispersive x-ray (EDX) spectrum imaging yields compositional information with a spatial resolution down to the atomic level. However, experimental limitations often produce extremely sparse and noisy EDX spectra. Under such conditions, every detecte ...

IOP Publishing Ltd2025

Comprehensive benchmarking and user guide for the characterization of CVD-grown transition metal chalcogenides

Andras Kis, Yanfei Zhao

Since the discovery of graphene in 2004, there has been rapid progress in research on two-dimensional (2D) material’s potential applications with significant impact. Efforts to bring 2D materials closer to industrial production, quality assessment, and sta ...

Academia.edu Journals2025

Advanced imaging of gas diffusion layers: A comparison between focused ion beam scanning electron microscopy and X-ray computed tomography

Jan Van Herle, Hossein Pourrahmani

With the advances in clean technologies, the role of fuel cells and batteries is becoming increasingly vital. Proton exchange membrane fuel cells are known to be the best candidates for low-temperature and portable operations, such as hydrogen cars. The ef ...

2025

Electron beam-based direct writing of nanostructures using a palladium β-ketoesterate complex

Chinmai Sai Jureddy, Patrik Willi Hoffmann

Gas-assisted focused electron beam-induced deposition (FEBID) as a direct, minimally invasive 3D nanopatterning tool offers many advantages in making nanostructures with complex shapes and novel compositions for evolving nanotechnological applications. In ...

BEILSTEIN-INSTITUT2025

Lamellar Schwann Cells in the Pacinian Corpuscle Potentiate Vibration Perception

Graham Knott, Mary-Claude Croisier-Coeytaux, Jérôme Blanc, Stéphanie Clerc

Pacinian corpuscles are among the most sensitive mechanoreceptors found in vertebrates, and they are tuned to vibrations in the highest perceptible frequency range (100 to 2000 Hz). One of their anatomical hallmarks is the onion-like cell layers surroundin ...

AMER ASSOC ADVANCEMENT SCIENCE2025

Effect of precipitates on martensite formation and shape memory effect of FeMnSi-based shape memory alloys fabricated by laser powder bed fusion

Christian Leinenbach, Irene Ferretto

The initial and evolving microstructure during the tensile test of two Fe-17Mn-5Si-10Cr-4Ni shape memory alloys, with and without V, C and fabricated by laser powder bed fusion are investigated and compared via electron backscattered diffraction, transmiss ...

ELSEVIER SCIENCE SA2025

Bioanode engineering for living solar cells

Charlotte Elisabeth Marie Roullier

Whole-cell biophotovoltaic (BPV) devices leverage photoautotrophic microorganisms like cyanobacteria to convert sunlight and water into bioelectricity. They are capable of growing on sequestered carbon dioxide (CO2), eliminating the need to add exogenous o ...

EPFL2025

Microsecond Time-Resolved Cryo-Electron Microscopy

Oliver Florian Harder

Recently, single-particle cryo-electron microscopy emerged as a technique capable of determining protein structures at near-atomic resolution and resolving protein dynamics with a temporal resolution ranging from second to milliseconds. This thesis describ ...

EPFL2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Ana Catarina Gouveia Braz, François Maréchal, Luc Girardin, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

Philippe Aubin

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

EPFL2024

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Thermal conductivity of Li 3 PS 4 solid electrolytes with ab initio accuracy

Michele Ceriotti, Federico Grasselli, Davide Tisi, Lorenzo Gigli

The vast amount of computational studies on electrical conduction in solid-state electrolytes is not mirrored by comparable efforts addressing thermal conduction, which has been scarcely investigated despite its relevance to thermal management and (over)he ...

Amer Physical Soc2024

Composition and Element Distribution Mapping of γ′ and γ" Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry

Philippe Buffat

The main strengthening mechanism for Inconel 718 (IN718), a Ni-based superalloy, is precipitation hardening by gamma ' and gamma '' particles. It is thus essential, for good alloy performance, that precipitates with the desired chemical composition have ad ...

MDPI2024

Mapping orthorhombic domains with geometrical phase analysis in rare-earth nickelate heterostructures

Duncan Thomas Lindsay Alexander, Bernat Mundet

Most perovskite oxides belong to the Pbnm space group, composed of an anisotropic unit cell, A-site antipolar displacements, and oxygen octahedral tilts. Mapping the orientation of the orthorhombic unit cell in epitaxial heterostructures that consist of at ...

Aip Publishing2024

A continuous-wave and pulsed X-band electron spin resonance spectrometer operating in ultra-high vacuum for the study of low dimensional spin ensembles

Giovanni Boero, Fabio Donati, Soyoung Oh

We report the development of a continuous-wave and pulsed X-band electron spin resonance (ESR) spectrometer for the study of spins on ordered surfaces down to cryogenic temperatures. The spectrometer operates in ultra-high vacuum and utilizes a half-wavele ...

Aip Publishing2024

Optimizing Atomic Layer Deposition Processes with Nanowire-Assisted TEM Analysis

Ivo Utke, Johann Michler, Xavier Maeder

Atomic layer deposition (ALD) is one of the premier methods to synthesize ultra-thin materials on complex surfaces. The technique allows for precise control of the thickness down to single atomic layers, while at the same time providing uniform coverage ev ...

Wiley2024

Revealing the Mechanism Underlying 3D-AFM Imaging of Suspended Structures by Experiments and Simulations

Marcos Penedo Garcia

The invention of 3D atomic force microscopy (3D-AFM) has enabled visualizing subnanoscale 3D hydration structures. Meanwhile, its applications to imaging flexible molecular chains have started to be experimentally explored. However, the validity and princi ...

Wiley-V C H Verlag Gmbh2024