Publications related to Estimation of interfacial fracture toughness based on progressive edge delamination of a thin transparent coating on a polymer substrate

Related publications (34)

Photochromic Control in Hybrid Perovskite Photovoltaics

Jacques-Edouard Moser, Aaron Tomas Terpstra

The application of perovskite photovoltaics is hampered by issues related to the operational stability upon exposure to external stimuli, such as voltage bias and light. The dynamic control of the properties of perovskite materials in response to light cou ...

WILEY-V C H VERLAG GMBH2025

Additive Manufacturing of Metal Matrix Composites for Space Applications

Gaëtan Bernard

Titanium-based Metal Matrix Composites (MMCs) offer remarkable mechanical, thermal, and corrosion resistance properties and are of high interest to several industrial sectors, including aerospace. One of the main commercial drawbacks of these materials, wh ...

EPFL2025

Strain-based analysis on the influence of local undercut geometry on fatigue crack initiation life

Alain Nussbaumer

The local undercut defects at the weld toe provide a potential initiation site for fatigue cracks and significantly impact the structure's fatigue strength. The influence of continuous undercut depth on fatigue performance is widely studied, but the resear ...

2024

Numerical study of optical transmission in silver plasmonic square nanohole arrays and its application to insulating windows

Andreas Schueler, Jérémy Jacques Antonin Fleury

Energy-efficient windows are being used to increase the thermal insulation of a fa & ccedil;ade. Such insulating windows contain an ultra-thin, multilayered, transparent silver coating that acts as an infrared mirror which significantly reduces thermal los ...

2024

Nanostructure and Optical Property Tailoring of Zinc Tin Nitride Thin Films through Phenomenological Decoupling: A Pathway to Enhanced Control

Aïcha Hessler-Wyser, Johann Michler, Caroline Hain, Daniele Casari

This work addresses the need for precise control of thin film sputtering processes to enable thin film material tailoring on the example of zinc tin nitride (ZTN) thin films deposited via microwave plasma-assisted high power reactive magnetron sputtering ( ...

Amer Chemical Soc2024

Investigations on Caesium Dispersion and Molybdenum Coating on SPIDER Components

Basile Marie Jacques Pouradier Duteil

SPIDER is the 100 keV full-size Negative Ion Source prototype of the ITER Neutral Beam Injector, operating at Consorzio RFX in Padova, Italy. The largest Negative Ion Source in the world, SPIDER generates an RF driven plasma from which Deuterium or Hydroge ...

2023

In-situ atomic level observation of the strain response of graphene lattice

Klaus Kern, Jz -Yuan Juo

Strain is inevitable in two-dimensional (2D) materials, regardless of whether the film is suspended or supported. However, the direct measurement of strain response at the atomic scale is challenging due to the difficulties of maintaining both flexibility ...

Nature Portfolio2023

Bacterial inactivation on sputtered TiOMoN and TiOMoN-Ag thin films under solar simulated light

Lioubov Kiwi, Sami Rtimi

The bacterial inactivation kinetics of Escherichia coli (E. coli) by innovative sputtered TiMoON and TiMoON-Ag films under simulated solar light irradiation is accounted for in a detailed, comprehensive and systematic form. This study presents the evidence ...

ELSEVIER SCIENCE SA2023

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Experimental investigation of two-dimensional Mode-II delamination in composite laminates

Thomas Keller, Anastasios Vassilopoulos, Congzhe Wang

The two-dimensional (2D) delamination growth in composite laminates under the Mode-II fracture condition was experimentally investigated using a novel set-up. Circular plate specimens with a centrally embedded pre-crack of two sizes were semi-clamped along ...

2023

Gallium-Based Thin Films for Wearable Sensors and Electronic Skins

Laurent Mirko Dejace

Integrated wearable electronics capable of providing biophysical information on complex and dynamic systems have attracted high interest in diverse fields such as healthcare, gaming and robotics. Wearable sensors can create artificial, electronic skins wit ...

EPFL2020

RADCAM-A radiation camera system combining foil bolometers, AXUV diodes, and filtered soft x-ray diodes

Basil Duval, Umar Sheikh, Luke Simons

Measurements of radiated power are critical for characterizing and optimizing tokamak performance. The RADCAM system, comprising arrays of foil bolometers, Absolute eXtreme UltraViolet (AXUV), and filtered soft x-ray diodes, has been constructed to provide ...

2022

Stabilized isogeometric discretizations on trimmed and union geometries, and weak imposition of the boundary conditions for the Darcy flow

Riccardo Puppi

Modern manufacturing engineering is based on a ``design-through-analysis'' workflow. According to this paradigm, a prototype is first designed with Computer-aided-design (CAD) software and then finalized by simulating its physical behavior, which usually i ...

EPFL2022

Experiments and modelling for glow discharge plasmas applied to niobium sputter deposition in superconducting radiofrequency cavities

Thibaut François Hugo Richard

Thin film coatings are ubiquitous in modern daily lives, from the semi-conductor industry to aesthetic applications, and rely on the modification of a given material to enhance its surface properties. At CERN (European Organization for Nuclear Research), t ...

EPFL2019

GeoNeRF: Generalizing NeRF with Geometry Priors

François Fleuret

We present GeoNeRF, a generalizable photorealistic novel view synthesis method based on neural radiance fields. Our approach consists of two main stages: a geometry reasoner and a renderer. To render a novel view, the geometry reasoner first constructs cas ...

IEEE COMPUTER SOC2022

Novel daylighting system based on advanced embedded optical microstructures for various facade orientation and climates

Jing Gong

The design of highly glazed building has become a worldwide trend in modern architecture. However, glazing may induce large thermal loss in winter while increase cooling load in summer, and it may also cause glare. In order to solve the problems, a novel m ...

EPFL2019

The mechanics of crack-tip dislocation emission and twinning

Predrag Andric

Dislocation emission from a crack tip is a necessary mechanism for crack tip blunting and toughening. A material is intrinsically ductile under Mode I loading when the critical stress intensity

K_{Ie}

for dislocation emission is lower than the critical s ...

EPFL2019

A Review and Mathematical Treatment of Infinity on the Smith Chart, 3D Smith Chart and Hyperbolic Smith Chart

Mihai Adrian Ionescu, Andrei Müller

This work describes the geometry behind the Smith chart, recent 3D Smith chart tool and previously reported conceptual Hyperbolic Smith chart. We present the geometrical properties of the transformations used in creating them by means of inversive geometry ...

MDPI2018

Overlapping Multipatch Isogeometric Method With Minimal Stabilization

Annalisa Buffa, Pablo Antolin Sanchez, Xiaodong Wei, Riccardo Puppi

We present a novel method for isogeometric analysis (IGA) to directly work on geometries constructed by Boolean operations including difference (i.e., trimming), union, and intersection. Particularly, this work focuses on the union operation, which involve ...

SIAM PUBLICATIONS2021

Feasibility study on a novel daylighting system with embedded micro compound parabolic concentrators (CPCs)

Jean-Louis Scartezzini, Andreas Schueler, André Gabriel Kostro, Jing Gong

A novel glazing system consisting of a polymer layer with embedded micro compound parabolic concentrators (CPCs), which is attached to a glass pane of glazing, is proposed. It aims to reduce the energy consumption due to cooling in buildings, provide dayli ...

SPIE-INT SOC OPTICAL ENGINEERING2018