Publications related to Universal expression for the drag on a fluid sphere

Lumped Drag Model Identification and Real-Time External Force Detection for Rotary-Wing Micro Aerial Vehicles

This work focuses on understanding and identifying the drag forces applied to a rotary-wing Micro Aerial Vehicle (MAV). We propose a lumped drag model that concisely describes the aerodynamical forces the MAV is subject to, with a minimal set of parameters ...

IEEE2024

The effects of kinematics, flexibility, and planform on the vortex formation and aerodynamic performance of flapping wing flight

Alexander Gehrke

In this thesis, the aerodynamic challenges in flapping wing flight are addressed. In particular, the effects of different wing kinematics, flexibilities, and planforms on the the leading edge vortex development and aerodynamic performance are investigated. ...

EPFL2023

Earwig-inspired foldable origami wing for micro air vehicle gliding

Jamie Paik, Risa Ishiguro

Foldable wings serve as an effective solution for reducing the size of micro air vehicles (MAVs) during non-flight phases, without compromising the gliding capacity provided by the wing area. Among insects, earwigs exhibit the highest folding ratio in thei ...

Frontiers Media Sa2023

Unveiling the Rolling to Kayak Transition in Propelling Nanorods with Cargo Trapping and Pumping

Ignacio Pagonabarraga Mora

Magnetic nanorods driven by rotating fields in water can be rapidly steered along any direction while generating strong and localized hydrodynamic flow fields. Here we show that, when raising the frequency of the rotating field, these nanopropellers underg ...

AMER CHEMICAL SOC2023

Experimental investigation of surface roughness effect on a free-flight sphere in a Ludwieg tube

Seong-Hyeon Park

Understanding the aerodynamic coefficients of meteoroid fragments, deorbiting space debris, or launch vehicle stages through atmospheric reentry is essential for ground risk assessments. In high enthalpy flow, surface roughness is a crucial factor affectin ...

KOREAN SOC MECHANICAL ENGINEERS2022

From coating flow patterns to porous body wake dynamics via multiscale models

Pier Giuseppe Ledda

Multiscale phenomena are involved in countless problems in fluid mechanics. Coating flows are known to exhibit a broad variety of patterns, such as wine tears in a glass and dripping of fresh paint applied on a wall. Coating flows are typically modeled und ...

EPFL2022

All you need is time to generalise the Goman-Khrabrov dynamic stall model

Fatma Ayancik Cinoglu, Karen Ann J Mulleners

Dynamic stall on airfoils negatively impacts their aerodynamic performance and can lead to structural damage. Accurate prediction and modelling of the dynamic stall loads are crucial for a more robust design of wings and blades that operate under unsteady ...

Cambridge University Press2022

Covariant formulation of relativistic mechanics

Miguel Alexandre Ribeiro Correia

Accretion disks surrounding compact objects, and other environmental factors, deviate satellites from geodetic motion. Unfortunately, setting up the equations of motion for such relativistic trajectories is not as simple as in Newtonian mechanics. The prin ...

American Physical Society2022

Effects of velocity-dependent apparent toughness on the pre- and post-shut-in growth of a hydraulic fracture

Dong Liu, Guanyi Lu

We investigate the growth of a plane-strain/radial hydraulic fracture in an infinite impermeable medium driven by a constant injection rate assuming that the apparent toughness scales with the decreasing fracture growth rate in a power-law relation. The vi ...

ELSEVIER SCI LTD2022

Homogenization-based design of microstructured membranes: wake flows past permeable shells

François Gallaire, Edouard Boujo, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna

A formal framework to characterize and control/optimize the flow past permeable membranes by means of a homogenization approach is proposed and applied to the wake flow past a permeable cylindrical shell. From a macroscopic viewpoint, a Navier-like effecti ...

Cambridge University Press2021

Insect Inspired Self-Righting for Fixed-Wing Drones

Dario Floreano, Victor Casas Rochel, Charalampos Vourtsis, William John Stewart

Micro Aerial Vehicles (MAVs) are being used in a wide range of applications such as surveillance, reconnaissance, inspection, and search and rescue. However, due to their size and mission profiles, they are prone to tipping over, jeopardizing their operati ...

2021

Accurate buoyancy and drag force models to predict particle segregation in vibrofluidized beds

Mehrdad Kiani Oshtorjani

The segregation of large intruders in an agitated granular system is of high practical relevance, yet the accurate modeling of the segregation (lift) force is challenging as a general formulation of a granular equivalent of a buoyancy force remains elusive ...

AMER PHYSICAL SOC2021

The dynamics and timescales of static stall

Sébastien Le Fouest, Karen Ann J Mulleners, Julien Dominique Claude Deparday

Airfoil stall plays a central role in the design of safe and efficient lifting surfaces. We typically distinguish between static and dynamic stall based on the unsteady rate of change of an airfoil’s angle of attack. Despite the somewhat misleading denotat ...

2021

Pressure on obstacles induced by granular snow avalanches

Michael Lukas Kyburz

The increasing population and the consequential demand for dwelling and recreation areas lead to more frequent conflicts between humans and natural hazards. In mountainous regions snow avalanches are, therefore, still a major threat to humans and infrastru ...

EPFL2021

On the numerical simulation of a confined cavitating tip leakage vortex under geometrical and operational uncertainties

Mohamed Farhat

The effects of operational and geometrical uncertainties on Tip Leakage Vortex (TLV) characteristics are investigated in the current research. Geometrical uncertainties are comprised of manufacturing tolerances or gradual geometry degradation over the time ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Deformation of porous flexible strip in low and moderate Reynolds number flows

François Gallaire, Pedro Miguel Nunes Pereira de Almeida Reis, Matteo Pezzulla

We present results from a combined experimental and numerical investigation of the fluid-structure interaction of cantilevered porous flexible strips, towed through a fluid bath. We characterize the steady-state deformation of the strips and their associat ...

AMER PHYSICAL SOC2020

Forces on buildings with openings and orientation in a steady post-tsunami free-surface flow

Anton Schleiss, Michael Pfister, Davide Wüthrich

Steady free-surface flows around buildings occurring during flood or tsunami events can produce major damages and a quantification of the post-peak forces is essential for safety and resilience of coastal structures. The loading process is highly affected ...

2020

Physical Mechanism and Flow Control of Tip Vortex Cavitation

Ali Amini

Occurrence of cavitation in hydraulic machines is a challenging issue because it is often accompanied with loss of efficiency, noise emissions, vibrations, and erosion damages. Tip vortices, in particular, are an ideal site for the development of cavitatio ...

EPFL2020

Extended Windage Loss Models for Gas Bearing Supported Spindles Operated in Dense Gases

Jürg Alexander Schiffmann, Kévin Rosset

Generic models are proposed to evaluate the skin friction coefficient acting on enclosed rotating disks and cylinders under various flow regimes. In particular, a model taking into account the inner radius of the disk is developed. The models are compared ...

2020

Self-similar invariant solution in the near-wall region of a turbulent boundary layer at asymptotically high Reynolds numbers

Tobias Schneider, Sajjad Azimi

At sufficiently high Reynolds numbers, shear-flow turbulence close to a wall acquires universal properties. When length and velocity are rescaled by appropriate characteristic scales of the turbulent flow and thereby measured in inner units, the statistica ...

Cambridge University Press2020