High quality superconducting NbN thin films on GaAs

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The integration of 2D materials with optical fibers enables multifunctional fiber devices, such as polarizers, modulators, and sensors. Recent advances in direct vapor deposition growth further enhance light‐2D material interactions to centimeter‐scale len ...

The transition from planar to three-dimensional (3D) magnetic nanostructures represents a significant advancement in both fundamental research and practical applications, offering vast potential for next-generation technologies like ultrahigh-density stora ...

We report a novel approach to distributed optical fiber sensing that achieves strain-only measurement with no intrinsic temperature cross-sensitivity. This is accomplished by filling the microstructured cladding of a photonic crystal fiber with a simple ga ...

Stimuli-responsive polymers offer unprecedented control over drug release in implantable delivery systems. Shape memory polymer fibers (SMPFs), with their large specific surface area and programmable properties, present promising alternatives for triggerab ...

Atomic layer deposition (ALD) is one of the premier methods to synthesize ultra-thin materials on complex surfaces. The technique allows for precise control of the thickness down to single atomic layers, while at the same time providing uniform coverage ev ...

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

Sc-doped aluminum nitride (AlScN) allows for piezoelectric devices with large electromechanical coupling and the benefits increase with larger Sc doping in the film. However, with a larger Sc concentration, the process window narrows, and it is necessary t ...

For the EU DEMO conductor testing, a temperature sensor based on Fiber Bragg Grating (FBG) optical fiber is studied at the EPFL Swiss Plasma Center. The SULTAN test facility has been upgraded to use fiber optic sensor for temperature monitoring and quench ...

Coating nano particles and other substrates for efficiency enhancement, protection and obtaining new atomic structures is a widespread research topic in catalysis and material synthesis. Thus far, different approaches of coating, ranging from simplest to s ...

Glass has been the material of choice for making optical elements, in large part due to its intrinsic properties: a temperature-dependent viscosity, which enables shaping the material into a broad variety of functional and artistic glassware. Silica glass ...

Continuous development of thin film deposition technologies is essential for the fabrication of films that meet the specific requirements of their target applications and working conditions. Therefore, it is necessary to increase the number of accessible a ...

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

This paper proposes and experimentally validates a distributed temperature alarm system based on carbon dioxide (CO2)-filled 18 m side air-holes fiber (SAHF), interrogated through a conventional (incoherent) optical time-domain reflectometer (OTDR). Custom ...

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

Using scanning tunneling microscopy (STM), we experimentally and theoretically investigate isolated platinum phthalocyanine (PtPc) molecules adsorbed on an atomically thin NaCl(100) film vapor deposited on Au(111). We obtain good agreement between theory a ...

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

Near-infrared luminescent materials have recently received considerable attention for a large number of applications, including in solid-state lighting, as bioimaging agents, as photovoltaic cells, and in the telecommunication industry. By adding diverse e ...

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

The deposition of fine sediment on top of the riverbed affects the reproduction of spawning fishes and some species of benthos. The clogging of the substrate resulting from this deposition is a well-known issue in rivers affected by anthropogenic activity ...

High quality superconducting NbN thin films on GaAs

Chat with Graph Search

2D Molybdenum Disulfide Embedded Photonic Crystal Fiber for all‐Fiber Phase Retarder

2025 roadmap on 3D nanomagnetism

Strain-only distributed optical fiber sensing with no intrinsic temperature sensitivity

Multimaterial Shape Memory Polymer Fibers for Advanced Drug Release Applications

Optimizing Atomic Layer Deposition Processes with Nanowire-Assisted TEM Analysis

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Piezoelectric and elastic properties of Al0.60Sc0.40N thin films deposited on patterned metal electrodes

Quench Detection and Temperature Measurement With Fiber Optic Sensors

Synthesis of metal oxide-overcoated carbon materials by liquid phase ALD and their applications in catalysis

Laser-based manufacturing of freeform glass micro-optics through topological transformation

Plasma-Assisted Hybrid Vapour Deposition Technology for Thin Film Fabrication

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Distributed Temperature Alarm System Based on Incoherent Optical Time-Domain Reflectometry and Side Air-Hole Optical Fibers

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Scanning Tunneling Microscopy for Molecules: Effects of Electron Propagation into Vacuum

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Full Solution Process of a Near-Infrared Light-Emitting Electrochemical Cell Based on Novel Emissive Ruthenium Complexes of 1,10-Phenanthroline-Derived Ligands and a Eutectic Alloy as the Top Electrode

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Limits between surface and inner clogging of riverbed by fine sediment