Publications related to Hematite photoelectrodes for water splitting: evaluation of the role of film thickness by impedance spectroscopy

Related publications (40)

Decoration of ZnO Nanorod Arrays with Heterojunction of Graphene Quantum Dots and MoS2 Nanoparticles for Photoelectrochemical Water Splitting

Conversion of sunlight to a chemical fuel through photoelectrochemical (PEC) water splitting is deemed to be a promising solution to satisfy future energy needs. In this study, a photoanode based on the triple heterojunction of MoS2/graphene quantum dots/Z ...

2025

High-throughput parallel testing of ten photoelectrochemical cells for water splitting: case study on the effects of temperature in hematite photoanodes

Sophia Haussener, Isaac Thomas Holmes-Gentle, Franky Esteban Bedoya Lora, Roberto Valenza

High-throughput testing of photoelectrochemical cells and materials under well-defined operating conditions can accelerate the discovery of new semiconducting materials, the characterization of the phenomena occurring at the semiconductor-electrolyte inter ...

Royal Soc Chemistry2024

Ternary Oxides of s - and p -Block Metals for Photocatalytic Solar-to-Hydrogen Conversion

Iurii Timrov

Oxides containing metals or metalloids from the p block of the periodic table (e.g., In, Sn, Sb, Pb, and Bi) are of technological interest as transparent conductors and light absorbers for solar-energy conversion due to the tunability of their electronic c ...

2024

Synergistic Integration of a Ru(bda)-Based Catalyst in a Covalent Organic Framework for Enhanced Photocatalytic Water Oxidation

Federico De Biasi

To address the urgent need for sustainable energy processes, there is a growing demand for multifunctional materials that mimic natural photosynthetic enzyme functions, specifically light-harvesting, efficient photoinduced charge separation, and integratio ...

2024

Second harmonic scattering of nanoparticles: A journey into the electrical double layer

Bingxin Chu

In aqueous solutions, a charged surface causes the redistribution of nearby ions. The ion layers formed are known as the electrical double layer (EDL), and are widespread in many systems involving electrochemistry, colloidal science, biomedicine, and energ ...

EPFL2024

Contrasting Views of the Electric Double Layer in Electrochemical CO2 Reduction: Continuum Models vs Molecular Dynamics

Sophia Haussener, Evan Fair Johnson

In the field of electrochemical CO2 reduction, both continuum models and molecular dynamics (MD) models have been used to understand the electric double layer (EDL). MD often focuses on the region within a few nm of the electrode, while continuum models ca ...

Amer Chemical Soc2024

Assessing the Charge Carrier Dynamics at Hybrid Interfaces of Organic Photoanodes for Solar Fuels

Kevin Sivula, Yongpeng Liu, Han-Hee Cho

Organic semiconductors (OSCs) have emerged as promising active layers for photoanodes to drive photoelectrochemical (PEC) oxidation reactions. Interfacing an OSC with an inorganic electron transport layer (ETL) is key to enabling both high performance and ...

Amer Chemical Soc2024

Towards Quantitative Terahertz Characterisation of Zinc Phosphide Thin Films for Photovoltaic Applications

Anna Fontcuberta i Morral, Jean-Baptiste Leran, Simon Robert Escobar Steinvall, Elias Zsolt Stutz, Rajrupa Paul, Mirjana Dimitrievska, Léa Buswell

The earth-abundant and non-toxic material Zinc phosphide (Zn3P2) is a promising candidate for solar cell applications. However, growth of defect-free, high-quality thin films on substrates that can integrate with current technology (e.g. silicon) remains c ...

IEEE Computer Society2024

On the use of Cramér-Rao Lower Bound for least-variance circuit parameters identification of Li-ion cells

Mario Paolone, Vladimir Sovljanski

Electrochemical Impedance Spectroscopy (EIS) and Equivalent Circuit Models (ECMs) are widely used to characterize the impedance and estimate parameters of electrochemical systems such as batteries. We use a generic ECM with ten parameters grouped to model ...

2024

Controlling On-Surface Photoactivity: The Impact of π-Conjugation in Anhydride-Functionalized Molecules on a Semiconductor Surface

Christian Wäckerlin

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either trans ...

Wiley-VCH Verlag GmbH2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Pseudo-Three-Dimensional Analytical Model of Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

Literature on linear induction motors (LIMs) has proposed several approaches to model the behavior of such devices for different applications. In terms of accuracy and fidelity, field analysis-based models are the most relevant. Closed-form or numerical so ...

2024

Boosting solar fuel production of bismuth ferrite thin film by incorporating reduced graphene oxide

Mohammadreza Golobostanfard

In this study, a facile chemical approach was utilized to successfully fabricate a porous bismuth ferrite (BiFeO3, BFO)/reduced graphene oxide (rGO) nanocomposite thin film as a photoanode for photoelec-trochemical (PEC) water splitting. The BFO nanopartic ...

2023

Tungsten oxide-based photoanodes: biomass valorization and the effects of oxygen vacancies

Nukorn Plainpan

Tungsten oxide-based materials have unique and intriguing properties as photoanode materials for solar energy conversion. The first part of the thesis focuses on the use of WO3 photoanodes for the oxidation of 5-(hydroxymethyl)furfural (HMF). Chapter one l ...

EPFL2023

Charge Extraction and Recombination Dynamics of CdSe/CdTe Solar Cells Studied with Transient Photovoltage/Photocurrent Techniques

Mohammad Khaja Nazeeruddin, Iwan Zimmermann

Significant advancements have been made in the development of high-performance cadmium telluride (CdTe)-based thin film solar cells. However, studies examining the transient excited-state charge dynamics, which determine the final steady-state device perfo ...

IEEE2023

Design and manufacture of edible microfluidic logic gates

Dario Floreano, Bokeon Kwak, Shuhang Zhang

Edible robotics is an emerging research field with potential use in environmental, food, and medical scenarios. In this context, the design of edible control circuits could increase the behavioral complexity of edible robots and reduce their dependence on ...

IEEE2023

Momentum-Space Imaging of Ultra-Thin Electron Liquids in δ-Doped Silicon

Gabriel Aeppli

Two-dimensional dopant layers (δ-layers) in semiconductors provide the high-mobility electron liquids (2DELs) needed for nanoscale quantum-electronic devices. Key parameters such as carrier densities, effective masses, and confinement thicknesses for 2DELs ...

WILEY2023

Photoelectrochemical Cell Engineering for Solar Energy Conversion

Dan Zhang

Solar energy is the most abundant energy source, harnessing solar energy holds the solution to the challenge of increasing global energy demand and reducing our dependence on fossil fuels. Photovoltaics which directly convert solar energy into electricity ...

EPFL2023

Transparent Porous Conductive Substrates for Gas-Phase Photoelectrochemical Hydrogen Production

Kevin Sivula, Jun Ho Yum, Simon Nussbaum, Rebekah Anne Wells, Marina Caroline Michèle Caretti, Hannah Elizabeth Johnson, Emeline Cécile Rideau, Benjamin Goldman, Elizaveta Potapova Mensi

Gas diffusion electrodes are essential components of common fuel and electrolysis cells but are typically made from graphitic carbon or metallic materials, which do not allow light transmittance and thus limit the development of gas-phase based photoelectr ...

Wiley-V C H Verlag Gmbh2023