Publications related to Methodology for Calibrating Fatigue Load Models for Composite Road Bridges

Related publications (25)

Additive Manufacturing of Metal Matrix Composites for Space Applications

Titanium-based Metal Matrix Composites (MMCs) offer remarkable mechanical, thermal, and corrosion resistance properties and are of high interest to several industrial sectors, including aerospace. One of the main commercial drawbacks of these materials, wh ...

EPFL2025

How Stress Biaxiality Controls Crack Morphology and Apparent Fracture Energy of Dikes and Sills

Marie Estelle Solange Violay, Antoine Guggisberg

The emplacement of dikes and sills plays a crucial role in crustal mechanics. The parameter used to describe their resistance to propagation, fracture energy, remains controversial. Here, we show how different stress biaxiality levels experienced by dikes ...

2025

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Influence of fiber orientation on the high cycle tensile fatigue resistance of Ultra-High Performance Fiber Reinforced Cementitious

Eugen Brühwiler, Alain Nussbaumer, Jian Zhan

This paper quantitatively studies the influence of fiber orientation on the high cycle tensile fatigue resistance of ultra-high performance fiber reinforced cementitious composites (UHPFRC) within and beyond elastic domain. Eight tensile fatigue tests and ...

2024

Experimental testing and structural analysis of composite tile – reinforced concrete domes

Savvas Saloustros

Conventional formworks for concrete curved shells either are expensive, complex and wasteful or have formal restrictions. Using tile vaults (also known as timbrel, Guastavino, thin-tile or Catalan vaults) as stay-in-place formwork for concrete shells could ...

2023

Novel multi-crack damage approach for pultruded fiber-polymer web-flange junctions

Thomas Keller

This paper aims to propose a novel approach to assess the multi-crack behavior of layered fiber-polymer composites. The Compliance and R-curves generated from this novel approach were useful to understand the multiple delamination process, enabling to eval ...

Elsevier Sci Ltd2023

Corrosion behavior and tribological-microstructural characterization of Al/ZrO2-Gr hybrid composite fabricated via Friction Stir Processing

Seyyedezzatollah Moosavi

The present study investigates the microstructural evolution, tribological properties, and corrosion behavior of hybrid metal matrix composites reinforced by a combination of graphite (Gr) and zirconia (ZrO2) particles fabricated by Friction Stir Processin ...

2023

LCM of thermoset-based fiber reinforced composites for large-scale applications: are process kinetics and structural properties antagonistic?

Véronique Michaud

This article reviews the main methods to manufacture large-scale composite parts, with a focus on Liquid Composite Molding techniques of thermoset-based fiber reinforced structural parts. As this process relies on the impregnation of a dry textile stack, t ...

IOP Publishing2023

Uni-axial reinforced dielectric elastomer actuators with embedded 3D printed fibers

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Biranche Tandon

Dielectric elastomer actuators (DEAs) can be described as compliant capacitors formed by a dielectric elastomer film sandwiched between two electrodes. An applied voltage results in a compressive Maxwell stress, a thickness reduction and thus an expansion ...

2023

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

Véronique Michaud, Valentin Rougier

The development of reusable fire-safe polymers with a prolonged lifetime heralds the switch for a transition towards circular economy. In this framework, we report a novel phosphonated thermoset which is composed of networked phosphonate esters containing ...

ELSEVIER SCIENCE SA2023

Experimental investigation of two-dimensional Mode-II delamination in composite laminates

Thomas Keller, Anastasios Vassilopoulos, Congzhe Wang

The two-dimensional (2D) delamination growth in composite laminates under the Mode-II fracture condition was experimentally investigated using a novel set-up. Circular plate specimens with a centrally embedded pre-crack of two sizes were semi-clamped along ...

2023

Energy dissipation in fiber-polymer composites adhesive joints under cyclic loading

Ghazaleh Eslami

Sustainable development has emerged as a paramount consideration in various fields of industry, including construction, to preserve the environment and its finite resources. Lightweight structures, such as fiber-polymer composite structures, address both s ...

EPFL2023

Experimental Study on the Static and Fatigue Behaviour of a New Mechanical Wedge-Barrel Anchor

Alain Nussbaumer

Post-tensioned steel strands have been traditionally used in different prestressed structures such as concrete girders, post-tensioned concrete slabs, cable-stayed bridges, post-tensioned walls, etc. for a long time. However, due to the vulnerability of st ...

SPRINGER-VERLAG SINGAPORE PTE LTD2022

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

Characterization of shear deformations in reinforced concrete members without shear reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone, Andri Setiawan

The load-carrying capacity of many reinforced concrete structures is governed by shear failures, occurring before reaching the flexural capacity of the member. For redundant systems, such as slabs subjected to concentrated loads, local shear failures (typi ...

2022

Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview

Anastasios Vassilopoulos

The development of new adhesives has allowed to expand the application of bonding into the most diverse industrial fields. This review article presents the commonly used experimental methods for the investigation of mechanical performance of adhesively bon ...

TAYLOR & FRANCIS LTD2022

Combined Shear-Flexural Verification Of In Plane Loaded Reinforced And Unreinforced Masonry Walls

Lorenzo Benedetti

The safety verification of in-plane loaded masonry panels requires the evaluation of at least three different collapse conditions connected with overturning, shear sliding, and shear - compression failure at the panels' toe. In reinforced panels, the resis ...

INT CENTER NUMERICAL METHODS ENGINEERING2021

Model-Based Interpretation of Measurements for Fatigue Evaluation of Existing Reinforced Concrete Bridges

Eugen Brühwiler, Ian Smith, Sai Ganesh Sarvotham Pai, Imane Bayane

New methods are required for sustainable and economical management of bridges. Efficient management can be achieved by a detailed understanding of bridge behavior through monitoring and model-based data interpretation. This paper presents a methodology to ...

2021

Minimal mass design of active tensegrity structures

Yafeng Wang

Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yieldin ...

ELSEVIER SCI LTD2021

Resistance and ductility of FRP composite hybrid joints

Thomas Keller, Lulu Liu

An experimental investigation of the load-bearing behavior and ductility of FRP hybrid double-lap joints composed of both adhesively-bonded and bolted connection parts was conducted. Amongst other things, the effects of the adherends’ fiber architecture (u ...

2020