Probing the buckling of pressurized spherical shells

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Cementitious materials show anomalous behaviour during capillary imbibition: a lack of linearity of the mass gain versus the square root of time. This is considered to be caused by the water retention in the calcium silicate (C-S-H) structure (and conseque ...

The stiffness of cells and of their nuclei is a biomarker of several pathological conditions. Current measurement methods rely on invasive physical probes that yield one or two stiffness values for the whole cell. However, the internal distribution of cell ...

Bending-active elastica beam is a structural configuration that is based on the elastic deformation of an initially straight beam. This deformation occurs when horizontal displacements are applied to a sliding support, causing the beam to bend into an arch ...

Several boreholes were drilled for site comparison of a deep geological repository (DGR) in Northern Switzerland. The main target of the exploration program was the >100m thick Opalinus Clay, the designated host rock encountered at approximately 450 to 100 ...

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

In this thesis, we conduct a comprehensive investigation into structural instabilities of both elastic and magneto-elastic beams and shells, resulting in a creative proposal to design a programmable braille reader. Methodologically, we combine numerical si ...

Three-dimensional topological semimetals have emerged as strong candidates to probe new fundamental physical phenomena that could be exploited to develop next generation electronics. However, many aspects of their electronic properties remain unclear. Thi ...

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

Kirigami, the ancient technique of paper cutting, has been successfully applied to enhance the stretchability and ductility of nanoscale graphene. However, existing experimentally realized graphene kirigami (GK) are created by introducing parallel cuts, ex ...

The plastic deformation of small-scale face-centered cubic metals exhibits intermittent slip burst events that appear on stress-strain curves as sudden strain jumps and/or load drops. These events are generally attributed to the avalanche-like cooperative ...

Metal plasticity is an inherently multiscale phenomenon due to the complex long-range field of atomistic dislocations that are the primary mechanism for plastic deformation in metals. Atomistic/Continuum (A/C) coupling methods are computationally efficient ...

Prequalified beam-to-column connections in steel moment resisting frames usually concentrate inelastic deformations in the steel beam ends. As such, nonlinear geo-metric instabilities (i.e., local buckling) may occur in these regions at modest lateral drif ...

In this thesis, we study the mechanics of tight physical knots. Knots are omnipresent in surgery, climbing, and sailing, with disastrous consequences when the filament or the rope fails to perform its function. Even if the importance of mechanical analysis ...

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Fatigue damage in materials results in localized strain at the microstructural level. In many engineering components of the cooling circuits of nuclear power plants, where austenitic steels are used, the material experiences multiaxial cyclic loading, eith ...

We develop a reduced-order model for thin plates made of hard magnetorheological elastomers (hard-MREs), which are composed of hard-magnetic particles embedded in a polymeric matrix. First, we propose a new magnetic potential, as an alternative to an exist ...

We introduce a computational pipeline for simulating and designing C-shells, a new class of planar-to-spatial deployable linkage structures. A C-shell is composed of curved flexible beams connected at rotational joints that can be assembled in a stress-fre ...

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

In this study, TC-PRISMA was employed to simulate the precipitation (number density and radius) of an FeMnSi-based shape memory alloy (FeMnSi-SMA), with a chemical composition of Fe-17Mn-5Si-10Cr-4Ni-1(V, C) (wt%), during one-step and two-step aging proces ...

Pseudo-ductile behavior in composite structural frames can be achieved by enabling their beam-column joints to exhibit nonlinear structural response due to progressive damage, by using pseudo-ductile adhesives. This study investigates the static behavior o ...

Probing the buckling of pressurized spherical shells

Chat with Graph Search

Understanding imbibition in cementitious materials including C-S-H strain measurement and geometric restriction

Estimation of Stiffness Maps in Deforming Cells Through Optical Flow With Bounded Curvature

Short-term behavior of glass fiber-polymer composite bending-active elastica beam under service load application

Insights from an extensive triaxial testing campaign on a shale for comparative site characterization of a deep geological repository

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Instabilities in Elastic and Magneto-Elastic Beams and Shells: from Shell Buckling to the Design of a Programmable Braille Reader

Strain Gradients and Magnetoresistance in Microstructured 3D Topological Semi-metals

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Deformation response of highly stretchable and ductile graphene kirigami under uniaxial and biaxial tension

On the slip burst amplitude cutoff in dislocation-rich microcrystals

Lattice Green's function method for Atomistic/Continuum coupling

Geometric tolerances of welded connections with inelastic panel zones

Mechanics of Physical Knots: From Filaments in Contact to Surgical Suturing

Room-temperature strength of the interfacial bond between silica inclusions and iron

Microscopic Digital Image Correlation Analysis of Strain Distributions in Stainless Steel 316L Induced by Multiaxial Cyclic Loading

A reduced-order, rotation-based model for thin hard-magnetic plates

C-shells: Deployable Gridshells with Curved Beams

Microstructure et usinabilité d'alliages de titane béta-métastable

Simulation and experimental characterization of VC precipitation and recovery stress formation in an FeMnSi-based shape memory alloy

Experimental investigation of rotational behavior of pseudo-ductile adhesive angle joints exhibiting variable strain rate