Publications related to Heat flux analysis of Type-I ELM impact on a sloped, protruding surface in the JET bulk tungsten divertor

Related publications (43)

Impurity-seeded detachment in conventional and optimized TCV divertor geometry

Nuclear fusion provides a potentially unlimited and clean energy source which motivates the development of fusion power plants. The tokamak is one of the most promising concepts for a future reactor, confining the fusion plasmas in a torus using strong mag ...

EPFL2025

Plasma state monitoring and disruption characterization using multimodal VAEs

Giulio Romanelli, Olivier Sauter, Alessandro Pau, Yoeri Renier Johannes Poels, Cristina Venturini

When a plasma disrupts in a tokamak, significant heat and electromagnetic loads are deposited onto the surrounding device components. These forces scale with plasma current and magnetic field strength, making disruptions one of the key challenges for futur ...

IOP Publishing Ltd2025

X-point radiation: From discovery to potential application in a future reactor

Holger Reimerdes, Christian Gabriel Theiler, Umar Sheikh, Olivier Claude Martin Février

Power exhaust is a crucial issue for future fusion reactors. Divertor detachment and the required power dissipation fractions of about 95% are foreseen to be achieved by impurity seeding. In a tokamak, at high seeding levels the radiation often concentrate ...

Elsevier2025

Neutral pressure measurement in TCV tokamak using ASDEX-type pressure gauges

Holger Reimerdes, Marcelo Baquero Ruiz, Guang-Yu Sun, Elena Tonello, Marc Noël, Mateusz Gospodarczyk, Hammam Elaian

Probing the neutral gas distribution at the edge of magnetic confinement fusion devices is critical for plasma exhaust studies. In the TCV tokamak, a set of ASDEX-type hot ionization pressure gauges (APGs) has been installed for fast, in situ measurements ...

2025

Operation Above the Greenwald Density Limit in High Performance DIII-d Negative Triangularity Discharges

Olivier Sauter

The density limit in strongly-shaped negative triangularity (NT) discharges is studied experimentally in the DIII-D tokamak. Record-high Greenwald fractions fG are obtained, using gas puff injection only, with values up to near 2, where fG is defined as th ...

IOP Publishing Ltd2025

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Mengdi Kong

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

IOP Publishing Ltd2024

Investigation of scrape-off layer and divertor transport using infrared thermography and SOLPS-ITER simulations

Claudia Colandrea

Nuclear fusion, with its potential to provide a nearly unlimited energy source, has inspired scientists to work on the development of fusion power plants. Among the various devices designed to harness nuclear fusion, the tokamak confines the fusion fuel, w ...

EPFL2024

Global fluid simulation of plasma turbulence in stellarators with the GBS code

Paolo Ricci, Joaquim Loizu Cisquella, António João Caeiro Heitor Coelho, Zeno Tecchiolli

The implementation of three-dimensional magnetic fields, such as the ones of stellarators, in the GBS code (Ricci et al 2012 Plasma Phys. Control. Fusion54 124047; Giacomin et al 2022 J. Comput. Phys.464 111294) is presented, and simulation results are dis ...

IOP Publishing Ltd2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Gyrokinetic turbulence modeling of a high performance scenario in JT-60SA

Stefano Coda, Stephan Brunner, Aylwin Iantchenko

Local gyrokinetic simulations are used to model turbulent transport for the first time in a representative high-performance plasma discharge projected for the new JT-60SA tokamak. The discharge features a double-null separatrix, 41 MW of combined neutral b ...

IOP Publishing Ltd2024

Study of impurity C transport and plasma rotation in negative triangularity on the TCV tokamak

Olivier Sauter, Basil Duval, Stefano Coda, Benoît Labit, Laurie Porte, Alexander Karpushov, Antoine Pierre Emmanuel Alexis Merle, Alessandro Pau, Justin Richard Ball, Filippo Bagnato, Dmytry Mykytchuk

Carbon impurity transport is studied in the TCV tokamak using a charge exchange recombination diagnostic. TCVs flexible shaping capabilities were exploited to extend previous impurity transport studies to negative triangularity (delta < 0). A practical way ...

Iop Publishing Ltd2024

Overview of physics results from MAST upgrade towards core-pedestal-exhaust integration

Olivier Sauter, Holger Reimerdes, Christian Gabriel Theiler, Federico Alberto Alfredo Felici, Matteo Vallar, Samuele Mazzi

Recent results from MAST Upgrade are presented, emphasising understanding the capabilities of this new device and deepening understanding of key physics issues for the operation of ITER and the design of future fusion power plants. The impact of MHD instab ...

IOP Publishing Ltd2024

Optimizing the ITER NBI ion source by dedicated RF driver test stand

Riccardo Agnello

The experimental fusion reactor ITER will feature two (or three) heating neutral beam injectors (NBI) capable of delivering 33(or 50) MW of power into the plasma. A NBI consists of a plasma source for production of negative ions (extracted negative ion cur ...

Institute of Physics2024

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Sophie Danielle Angelica Gorno

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

EPFL2024

Divertor turbulence characterisation using Gas Puff Imaging in the TCV tokamak

Curdin Tobias Wüthrich

The performance of magnetic confinement fusion devices, such as tokamaks, is strongly correlated to the phenomena that occur in the boundary region of the plasma core that faces the wall of the device. The dominant cross-field transport mechanisms from the ...

EPFL2024

Global gyrokinetic study of density gradient driven instability in tokamaks: the ubiquitous mode

Laurent Villard

The ubiquitous mode is investigated in the linear regime for the first time using a global gyrokinetic model. These modes are driven by the density gradient in trapped electron population but with mode frequency in the ion diamagnetic drift direction, in c ...

2024

Experimental validation of momentum transport theory in the core of H-mode plasmas in the ASDEX Upgrade tokamak

Basil Duval

This study employs the established momentum transport analysis at ASDEX Upgrade [Zimmermann et al., Nucl. Fusion 63, 124003 (2023)] to investigate the parametric variations of the momentum transport coefficients in the core of H-mode plasmas. These experim ...

Aip Publishing2024

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Computational fluid dynamics simulations of the heat transfer properties of graphene-based nanolubricants and application to hydrodynamic lubrication

Roberto Guarino

In this paper, we consider experimental data available for graphene-based nanolubricants to evaluate their convective heat transfer performance by means of computational fluid dynamics (CFD) simulations. Single-phase models with temperature-dependent prope ...

Aip Publishing2024