Publication

Grain size and alloying effects on dynamic recovery in nanocrystalline metals

Helena Van Swygenhoven, Steven Van Petegem
2016
Journal Articles

Abstract

Dynamic recovery in nanocrystalline Ni and Ni50Fe50 with respective grain sizes of 65 rim and 15 nm is studied using stress reduction tests during in situ X-ray diffraction. The results are compared with a previous study on NC Ni with 35 nm grain size. Defect recovery by means of grain boundary processes plays an important role in controlling the strength evolution resulting in a constant flow stress during uniaxial deformation. The relative contributions of dislocation and grain boundary accommodation mechanisms are discussed in terms of grain size and alloying. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Official source

https://infoscience.epfl.ch/entities/publication/3b448654-450e-4e26-ac26-6a03984dde41

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Helena Van Swygenhoven, Steven Van Petegem
2016
Journal Articles

Abstract

Official source

https://infoscience.epfl.ch/entities/publication/3b448654-450e-4e26-ac26-6a03984dde41

About this result

Related concepts (30)

Grain boundary strengthening

In materials science, grain-boundary strengthening (or Hall–Petch strengthening) is a method of strengthening materials by changing their average crystallite (grain) size. It is based on the observation that grain boundaries are insurmountable borders for dislocations and that the number of dislocations within a grain has an effect on how stress builds up in the adjacent grain, which will eventually activate dislocation sources and thus enabling deformation in the neighbouring grain as well.

Recovery (metallurgy)

In metallurgy, recovery is a process by which a metal or alloy's deformed grains can reduce their stored energy by the removal or rearrangement of defects in their crystal structure. These defects, primarily dislocations, are introduced by plastic deformation of the material and act to increase the yield strength of a material. Since recovery reduces the dislocation density, the process is normally accompanied by a reduction in a material's strength and a simultaneous increase in the ductility.

Plasticity (physics)

In physics and materials science, plasticity (also known as plastic deformation) is the ability of a solid material to undergo permanent deformation, a non-reversible change of shape in response to applied forces. For example, a solid piece of metal being bent or pounded into a new shape displays plasticity as permanent changes occur within the material itself. In engineering, the transition from elastic behavior to plastic behavior is known as yielding. Plastic deformation is observed in most materials, particularly metals, soils, rocks, concrete, and foams.

Related publications (32)

Grain size and alloying effects on dynamic recovery in nanocrystalline metals

Chat with Graph Search

Solute-strengthening in metal alloys with short-range order

Pyroresistive response of percolating conductive polymer composites

DTT toroidal field conductor samples test in Sultan: DC and AC characterization