Publications related to High Gain Dual-Band Beam-Steering Transmit Array for Satcom Terminals at Ka-Band

Related publications (38)

Texture-enhanced Mechanical Stability of Transparent Electrodes for Flexible Optoelectronics with Near-infrared Response

Transparent electrodes with high conductivity and mechanical robustness are essential for flexible opto-electronic applications. Indium tin oxide (ITO) single layers have long been considered as unsuitable for flexible applications due to their brittleness ...

WILEY2025

Compact Dual-Polarized Multibeam Switch Integrated Antenna System for 5G mm-Wave Applications

Amir Mohsen Ahmadi Najafabadi

In this paper, a novel microstrip, single-layer, Lshaped series fed antenna array, with 12 elements operating at 28 GHz, is proposed. The antenna can switch its beam in 8 different directions covering 4 different azimuthal Φ cuts; which is accomplished usi ...

2025

Hedgehog Shell: Multibeam DRA with 2-D Beamsteering for mm-Wave Applications

Anja Skrivervik, German Augusto Ramirez Arroyave, Amir Mohsen Ahmadi Najafabadi

This paper investigates a low-cost method to form a multibeam antenna with 2-D beamsteering capability. The simple feeding method employed in this solution enables the dielectric rod antennas to generate multiple beams in the intended direction simultaneou ...

2025

A mmWave Low Complexity and Low-Cost Super Wideband Dual-Polarized Aperture Coupled Antenna for 5G Applications

Anja Skrivervik

Advanced antenna system (AAS) is a viable option for 5G millimeter-wave (mmWave) applications. AAS single element is favored to be dual-polarized, wideband, high gain, and compact in order to be utilized for 5G antenna arrays. In this paper, a low complexi ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Supramolecular interactions using β-cyclodextrin in controlling perovskite solar cell performance

Parnian Ferdowsi, Kevin Sivula, Jun Ho Yum, Jiyoun Seo

In the context of perovskite solar cells (PSCs), enhancing device performance often involves adding a small excess of lead iodide (PbI2) to the precursor solution. However, the presence of unreacted PbI2 can lead to accelerated degradation compromising lon ...

Royal Society of Chemistry2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

Anaël Morgane Jaffrès, Christophe Ballif, Quentin Thomas Jeangros, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman, Daniel Anthony Jacobs, Austin George Kuba

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable alpha-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality ...

Royal Soc Chemistry2024

A thermotropic liquid crystal enables efficient and stable perovskite solar modules

Mohammad Khaja Nazeeruddin, Bin Ding, Yong Ding

Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate du ...

Nature Portfolio2024

Assessing the Influence of Illumination on Ion Conductivity in Perovskite Solar Cells

Christophe Ballif, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman

Whether illumination influences the ion conductivity in lead-halide perovskite solar cells containing iodide halides has been an ongoing debate. Experiments to elucidate the presence of a photoconductive effect require special devices or measurement techni ...

2024

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

Alexandre Schmid, Mehdi Saberi

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Code for project entitled "study on conformal antennas, proof of concept prototype for a UAV"

Anja Skrivervik, Yuanyan Su

This code is used for developing the project entitled “Study on conformal antennas, proof of concept prototype for a UAV”, from the aspects of theory, design, and implementation. This code aims to speed up the investigation of an arbitrary phased array ant ...

Zenodo2024

Chemical Trend of Nonradiative Recombination in Cu(In,Ga)Se2 Alloys

Stefano Falletta

Nonradiative recombination in Cu(In,Ga)Se2 (CIGS) solar cells has long been attributed to the antisite defects MCu (M = In, Ga), but the underlying mechanism is still elusive. Using rigorous first-principles calculations, we demonstrate that the antisites ...

American Physical Society (APS)2023

Investigating the Effect of Crystal Morphology on Optoelectronic Properties of Zinc Phosphide Thin Films via Optical-pump Terahertz Probe Spectroscopy

Jean-Baptiste Leran, Mahdi Zamani, Simon Robert Escobar Steinvall, Elias Zsolt Stutz, Rajrupa Paul, Mirjana Dimitrievska, Léa Buswell

Zinc phosphide ( Zn3P2) is a promising earth-abundant material for solar cell applications but calls for the further understanding of its optoelectronic properties. In this work, we perform contact-free and noninvasive optical-pump terahertz probe (OPTP) s ...

IEEE2023

Charge Extraction and Recombination Dynamics of CdSe/CdTe Solar Cells Studied with Transient Photovoltage/Photocurrent Techniques

Mohammad Khaja Nazeeruddin, Iwan Zimmermann

Significant advancements have been made in the development of high-performance cadmium telluride (CdTe)-based thin film solar cells. However, studies examining the transient excited-state charge dynamics, which determine the final steady-state device perfo ...

IEEE2023

Next-generation applications for integrated perovskite solar cells

Mohammad Khaja Nazeeruddin

Organic/inorganic metal halide perovskites attract substantial attention as key materials for next-generation photovoltaic technologies due to their potential for low cost, high performance, and solution processability. The unique properties of perovskites ...

SPRINGERNATURE2023

Investigation and Mitigation of Moisture- and Potential-Induced Degradation Mechanisms of Silicon Heterojunction Solar Cells and Modules

Olatz Arriaga Arruti

Photovoltaic (PV) technology is one of the most promising renewable energy sources. The PV market is dominated by crystalline silicon (c-Si) based technologies, thus ensuring their long-term performance is of paramount importance for manufacturers, investo ...

EPFL2023

Synthesis and Characterization of Functionalized Spacer Cations for the Incorporation in Layered Perovskites

Simon Nussbaum

Layered hybrid organic-inorganic perovskite (LHOIP) materials are an emerging class of semiconductors endorsed as a more stable alternative compared to the more widely investigated 3D hybrid organic-inorganic halide perovskites (HOIP). Consisting of altern ...

EPFL2023

Chaotic microcomb inertia-free parallel ranging

Tobias Kippenberg, Johann Emmeram Riemensberger, Anton Lukashchuk, Anton Stroganov

Ever growing pixel acquisition rates in the fields of augmented reality, autonomous driving and robotics have increased interest in solid state beam scanning without moving parts. Modern photonic integrated laser ranging advances towards passive beam steer ...

AIP Publishing2023

A Triethyleneglycol C-60 Mono-adduct Derivative for Efficient Electron Transport in Inverted Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Konstantina Kalliopi Armadorou

Inverted perovskite solar cells (PSCs) have attracted increasing attention in recent years owing to their low-temperature fabrication proces s. However, they suffer from a limited number of electron transport materials available with [6,6]-phenyl C-61 buty ...

WILEY-V C H VERLAG GMBH2023

Technology Mapping Using Multi-output Library Cells

Giovanni De Micheli, Alessandro Tempia Calvino

Technology mapping transforms a technology-independent representation into a technology-dependent one given a library of cells. Even if technology libraries contain multi-output cells, state-of-the-art techniques fully exploit single-output cells only. Mul ...

2023