Publications related to Optically responsive dry cholesteric liquid crystal marbles

Related publications (31)

Aldehyde-Stabilization Strategies for Building Biobased Consumer Products around Intact lignocellulosic Structures

Jeremy Luterbacher, Songlan Sun, Lorenz Perry Manker, Shasha Zheng

Dwindling fossil resources and their associated environmental concerns have increased interest in biobased products. In particular, many approaches to convert lignocellulosic biomass into small-molecule building blocks are being explored via thermal, chemi ...

American Chemical Society2025

Frequency response of fiber reinforced DEAs

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi

Dielectric Elastomer Actuators (DEAs) have emerged as versatile and promising devices for a multitude of applications, including soft robotics, haptic interfaces, and artificial muscles. DEAs are an interesting soft actuator technology due to their high en ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Versatile Capillary Cells for Handling Concentrated Samples in Analytical Ultracentrifugation

Francesco Stellacci, Quy Ong Khac, Xufeng Xu

In concentrated macromolecular dispersions, far-from-ideal intermolecular interactions determine the dispersion behaviors including phase transition, crystallization, and liquid-liquid phase separation. Here, we present a novel versatile capillary-cell des ...

Amer Chemical Soc2024

Humidity-insensitive optical fibers for distributed sensing applications

Luc Thévenaz, Tiago Filipe Pimentel Das Neves

Humidity is a critical environmental factor in various applications, and its temperature dependence must be considered when developing thermo-hygrometer fiber sensors. The optical fibers that constitute the sensor must have a temperature reference, which s ...

2023

Domain Imaging and Switching Dynamics in BaTiO3-Based Photonic Integrated Devices

Jacqueline Geler Kremer

Keeping up with our constantly connected lifestyle of instant messages and video streaming has its repercussions. Data centers have been gobbling up resources becoming a significant share of the energy used worldwide. To keep up with demand and curb the en ...

EPFL2023

Design and Optimization of a Low Power and Fast Response Viscometer Used for Determination of the Natural Gas Wobbe Index

Danick Briand, Pierre-André Farine, Conor Joseph Slater, Gaël André Léon Farine, Marjan Shaker

This paper reports on the design of a microsystem-based thermal gas viscometer used for the determination of the quality of natural gas and its optimization through modification of its two main components: the hotplate and the capillary tube. Features, suc ...

2019

Advanced Diamond Microfabrication for Microoptics and Photonics

Marcell Kristof Kiss

Diamond is an exceptional material - hard, stiff, transparent, which makes it ideal for the fabrication of optical and mechanical systems that take advantage of these properties. Diamond is not only "better", but it offers the possibility of integrating br ...

EPFL2019

A Dual-Edge Pulsewidth Modulator for Fast Dynamic Response DC-DC Converters

Maher Kayal, Adil Koukab, Giacomo Ripamonti

Voltage regulator modules are dc-dc converters that power modern microprocessors. They must exhibit a fast dynamic response, in order to achieve satisfactory regulation performance in spite of the rapid load current variations. The pulsewidth modulator is ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

All-optical switching in epsilon-near-zero asymmetric directional coupler

Jiaye Wu

We propose an all-optical switch based on an asymmetric directional coupler structure with epsilon-near-zero (ENZ) layer. The nonlinear optical properties the of ENZ layer are analyzed by hot-electron dynamics process, and the all-optical operating perform ...

Nature Portfolio2022

Characterization of variable stiffness joints for adaptive structures

Gennaro Senatore

This paper presents a new strategy to control the structure dynamic response via a shift of the natural frequencies obtained through using variable stiffness joints. The joints are made of shape memory polymers and are fabricated through 3D printing. Stiff ...

Taylor & Francis2019

Fast Procedures for the Electrodeposition of Platinum Nanostructures on Miniaturized Electrodes for Improved Ion Sensing

Giovanni De Micheli, Sandro Carrara, Irene Taurino, Francesca Criscuolo

Nanostructured materials have attracted considerable interest over the last few decades to enhance sensing capabilities thanks to their unique properties and large surface area. In particular, noble metal nanostructures offer several advantages including h ...

2019

Balancing high-speed rotors at low speed using optimized parametric excitation and tuned nonlinear feedback

Amit Yedidia Dolev

The paper presents an improved slow-speed mass balancing procedure capable of reducing high-speed related imbalance. Parametric excitation is used to project the small imbalance forces onto a chosen mode of vibration, corresponding to a high critical rotat ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Systematic extraction of a control-oriented model from perturbative experiments and SOLPS-ITER for emission front control in TCV

Olivier Claude Martin Février, Artur Perek, Mirko Wensing

Systematic extraction of locally valid dynamic models from experiments is necessary for controller design and the validation of high fidelity models. This paper describes the extraction of a dynamic model in the form of a transfer function, giving the dyna ...

IOP Publishing Ltd2022

Third-Order Optical Nonlinearity in Two-Dimensional Transition Metal Dichalcogenides

We present a detailed calculation of the linear and nonlinear optical response of four types of monolayer twodimensional (2D) transition-metal dichalcogenides (TMDCs), having the formula MX2 with M = Mo, W and X = S, Se. The calculations are based on 6-ban ...

2018

Microfabrication of curved sidewall grooves using scanning nanosecond excimer laser ablation

Patrik Willi Hoffmann, Josef Andreas Schuler, Georgios Violakis, André Gabriel Kostro, Jing Gong

Novel glazing with embedded micro-mirrors can significantly reduce the energy consumption due to cooling and lighting in buildings. Especially promising are large arrays of periodic micro compound-parabolic-concentrators (CPCs) with angular-selected transm ...

SPIE2018

Smooth GaN membranes by polarization-assisted electrochemical etching

Nicolas Grandjean, Jean-François Carlin, Joachim Armand Simonne Ciers

III-nitride membranes offer promising perspectives and improved device designs in photonics, electronics, and optomechanics. However, the removal of the growth substrate often leads to a rough membrane surface, which increases scattering losses in optical ...

AMER INST PHYSICS2021

All-optical flip-flop based on dynamic Brillouin gratings

Luc Thévenaz, Marcelo Alfonso Soto Hernandez, Andrey Denisov

One of the most essential building blocks in modem electronics is the flip-flop. A flip-flop operates bi-stably between two states, remaining at a given output level (high or low level) until a specific input control signal changes. For many years, photoni ...

IEEE2017

Narrowband Optical Coupler Using Fano Interference in First Order Diffraction

Olivier Martin, Benjamin Gallinet, Giorgio Quaranta, Fabian Michael Lütolf

Light coupling in waveguides has been extensively investigated in a variety of contexts, from photonic integrated circuits to biosensing and near-eye displays for augmented reality. Here, narrowband diffraction is reported using a Fano interference effect ...

AMER CHEMICAL SOC2021

Decentralized and Distributed Transient Control for Microgrids

Alireza Karimi, Christoph Manuel Kammer

This paper treats the problem of primary and secondary control design in low-inertia power grids with mixed lines and a large amount of inverter-interfaced generation. A dynamic phasor model is developed that represents the electromagnetic and electromecha ...

Institute of Electrical and Electronics Engineers2019