Publications related to LCM of thermoset-based fiber reinforced composites for large-scale applications: are process kinetics and structural properties antagonistic?

Related publications (19)

Methodology for Calibrating Fatigue Load Models for Composite Road Bridges

Current fatigue load models (FLMs) for road bridges are typically calibrated based on steel and reinforced-concrete bridges. These models are not likely applicable to fiber–polymer composite bridges, primarily because the damage rate—defined as the slope o ...

2025

On the fatigue behavior of thin and thick adhesively bonded composite joints

Anastasios Vassilopoulos

Investigations of the fatigue performance of adhesively bonded joints were initiated since the 1950 s. An abundance of publications has emerged dealing with the experimental investigation of the fatigue performance of adhesively bonded joints of various ge ...

2025

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Influence of fiber orientation on the high cycle tensile fatigue resistance of Ultra-High Performance Fiber Reinforced Cementitious

Eugen Brühwiler, Alain Nussbaumer, Jian Zhan

This paper quantitatively studies the influence of fiber orientation on the high cycle tensile fatigue resistance of ultra-high performance fiber reinforced cementitious composites (UHPFRC) within and beyond elastic domain. Eight tensile fatigue tests and ...

2024

Quench Detection and Temperature Measurement With Fiber Optic Sensors

Davide Uglietti, Kamil Sedlák

For the EU DEMO conductor testing, a temperature sensor based on Fiber Bragg Grating (FBG) optical fiber is studied at the EPFL Swiss Plasma Center. The SULTAN test facility has been upgraded to use fiber optic sensor for temperature monitoring and quench ...

IEEE Institute of Electrical and Electronics Engineers2024

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

Véronique Michaud, Valentin Rougier

The development of reusable fire-safe polymers with a prolonged lifetime heralds the switch for a transition towards circular economy. In this framework, we report a novel phosphonated thermoset which is composed of networked phosphonate esters containing ...

ELSEVIER SCIENCE SA2023

Novel multi-crack damage approach for pultruded fiber-polymer web-flange junctions

Thomas Keller

This paper aims to propose a novel approach to assess the multi-crack behavior of layered fiber-polymer composites. The Compliance and R-curves generated from this novel approach were useful to understand the multiple delamination process, enabling to eval ...

Elsevier Sci Ltd2023

Uni-axial reinforced dielectric elastomer actuators with embedded 3D printed fibers

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Biranche Tandon

Dielectric elastomer actuators (DEAs) can be described as compliant capacitors formed by a dielectric elastomer film sandwiched between two electrodes. An applied voltage results in a compressive Maxwell stress, a thickness reduction and thus an expansion ...

2023

Energy dissipation in fiber-polymer composites adhesive joints under cyclic loading

Ghazaleh Eslami

Sustainable development has emerged as a paramount consideration in various fields of industry, including construction, to preserve the environment and its finite resources. Lightweight structures, such as fiber-polymer composite structures, address both s ...

EPFL2023

Experimental investigation of two-dimensional Mode-II delamination in composite laminates

Thomas Keller, Anastasios Vassilopoulos, Congzhe Wang

The two-dimensional (2D) delamination growth in composite laminates under the Mode-II fracture condition was experimentally investigated using a novel set-up. Circular plate specimens with a centrally embedded pre-crack of two sizes were semi-clamped along ...

2023

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview

Anastasios Vassilopoulos

The development of new adhesives has allowed to expand the application of bonding into the most diverse industrial fields. This review article presents the commonly used experimental methods for the investigation of mechanical performance of adhesively bon ...

TAYLOR & FRANCIS LTD2022

Experimental Study on the Static and Fatigue Behaviour of a New Mechanical Wedge-Barrel Anchor

Alain Nussbaumer

Post-tensioned steel strands have been traditionally used in different prestressed structures such as concrete girders, post-tensioned concrete slabs, cable-stayed bridges, post-tensioned walls, etc. for a long time. However, due to the vulnerability of st ...

SPRINGER-VERLAG SINGAPORE PTE LTD2022

Functionalization of polymer optical fibers for medical application

Jialuo Luo

The increasing challenges caused by the growing and aging population and the fast pace of life are calling for a change of our current medical care system towards being rapid, easy, and on-demand self-care. Empowerment with the self-caring components such ...

EPFL2022

Combined Shear-Flexural Verification Of In Plane Loaded Reinforced And Unreinforced Masonry Walls

Lorenzo Benedetti

The safety verification of in-plane loaded masonry panels requires the evaluation of at least three different collapse conditions connected with overturning, shear sliding, and shear - compression failure at the panels' toe. In reinforced panels, the resis ...

INT CENTER NUMERICAL METHODS ENGINEERING2021

A Contribution to the Design of Textile Reinforced Concrete Structures

Patrick Lorenzo Valeri

The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...

EPFL2020

Next generation synthetic fibers UHPFRC for sustainable structural applications

Amir Hajiesmaeili

The ever-increasing demand for rehabilitation of existing structures and construction of new ones, along with environmental issues of the construction sites represent a heavy burden for society in terms of economy and environment. Meanwhile, Ultra-High Per ...

EPFL2019

Scanning near-field optical microscopy with new probes and feedback modes

Anton Smirnov

Scanning Near-field Optical Microscopy (SNOM) technique enables to overcome Abbe diffraction limit of far-field optics as well as to obtain simultaneously optical and topographical images. While the optical resolution of the method is limited by the apertu ...

EPFL2019

Dynamically reconfigurable DEAs incorporating shape memory polymer fibers

Herbert Shea, Bekir Aksoy

We present variable stiffness dielectric elastomer actuators (DEAs), combining a single DEA actuator with embedded shape memory polymer (SMP) fibers, which can be electrically addressed to locally reduce the stiffness by a factor of 100. The device accommo ...

SPIE-INT SOC OPTICAL ENGINEERING2019