Publications related to Pultruded carbon fibre reinforced polymer strips produced with a novel bio-based thermoset polyester for structural strengthening

Related publications (22)

Deciphering tensile fatigue behavior of UHPFRC using magnetoscopy, DIC and acoustic emission

Eugen Brühwiler, Alain Nussbaumer, Jian Zhan

To explore the governing mechanism underlying the tensile fatigue behavior of Ultra-high Performance Fiber Reinforced Cementitious Composites (UHPFRC), this study tested eight specimens using four advanced non-destructive measurement techniques. First, mag ...

2025

Precious Metals recovery using novel metal-organic framework (MOF)

Jocelyn Richard Roth

Gold plays a dominant role in our modern society. Initially used in coinage and jewelry, it has become an essential metal for the electronics industries. Today, more gold is consumed than mined from virgin ores. Therefore, gold recycling methods have becom ...

EPFL2025

Optimization and Functionalization of the TiAlN/WC-Co Interface for cutting tools

Lucas Eric Jacques Degeneve

WC-Co cemented carbides are widely used in the cutting tool industry due to their mechanical properties. These composite materials indeed combines hardness and toughness, two properties that are generally contradictory. WC-Co is composed of hard WC grains ...

EPFL2025

Defining myocardial fiber bundle architecture in atrial digital twins

Alfio Quarteroni

A key component in developing atrial digital twins (ADT) - virtual representations of patients’ atria — is the accurate prescription of myocardial fibers which are essential for the tissue characterization. Due to the difficulty of reconstructing atrial fi ...

2025

QUANTIFICATION OF COHESIVE PROPERTIES IN BIOINSPIRED INTERFACES OF 3D-PRINTED HETEROGENEOUS MATERIALS

Umut Altuntas

This study employs a Cohesive Zone Model to quantitatively evaluate the evolution of interfacial fracture parameters across various interface architectures. Employing the Material Extrusion (ME) type 3D printing method, sutural interfaces characterized by ...

American Society of Mechanical Engineers (ASME)2025

Experimental and numerical investigation of an additively manufactured sandwich composite bridge deck utilizing gyroid building blocks

Anastasios Vassilopoulos

This work investigates the integration of Additive Manufacturing (AM) techniques with cellular metamaterials integrated into composite sandwich beam systems. The study proposes an approach that combines composite materials for the face sheets with cellular ...

2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Tensile Properties of Ex-Situ Ti-TiC Metal Matrix Composites Manufactured by Laser Powder Bed Fusion

Roland Logé

Titanium-based Metal Matrix Composites (MMCs) manufactured by additive manufacturing offer tremendous lightweighting opportunities. However, processing the high reinforcement contents needed to substantially improve elastic modulus while conserving signifi ...

2024

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Yves Perriard, Stefania Maria Aliki Konstantinidi

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Improved Material Formulations for Thick Adhesive Joints in Wind Turbine Blades

Jialiang Fan

Wind turbine rotor blades are usually fabricated using composite materials and epoxy adhesive to bond the elements together. Due to their large size, the thickness of the adhesive layer varies from 1 to up to 30 mm depending on the position. The failure of ...

EPFL2024

Numerical investigation of two-dimensional Mode-II delamination in composite laminates

Thomas Keller, Anastasios Vassilopoulos, Congzhe Wang

Existing standards for delamination tests on composite materials typically employ one-dimensional (1D) beam specimens. However, such specimens may not represent real delamination scenarios in composite structures, where cracks tend to propagate in two dime ...

Elsevier Sci Ltd2024

Influence of Fiber Orientation on the Elastic Limit Tensile Stress of UHPFRC

Eugen Brühwiler, Emmanuel Denarié, Jian Zhan

The elastic limit tensile stress of UHPFRC is governed by contributions of the cementitious matrix and the fibrous skeleton. This paper finds that fiber orientation has significant influence on the matrix tensile strength of UHPFRC, while this is not consi ...

2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Uniaxial Cyclic and Tensile Tests on Structural Metallic Materials

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Selimcan Ozden

Experimental data is imperative to characterize the behavior of materials used in structural analysis models. The aim of this data paper is to establish a database of material-scale uniaxial experiments, primarily conducted at EPFL, to assist with simulati ...

ASCE-AMER SOC CIVIL ENGINEERS2023

Polydimethylsiloxane based soft polymer optical fibers: From the processing-property relationship to pressure sensing applications

Fabien Sorin, Khushdeep Sharma

Polydimethylsiloxane (PDMS) based soft polymer optical fibers (POFs) have recently demonstrated their intriguing potential for different sensing applications like strain or temperature sensing. Recent studies have elaborated on the sensing capability of PD ...

2023

GFRP biocomposites produced with a novel high-performance bio-based unsaturated polyester resin

Mateus De Assunção Hofmann

This paper presents the manufacturing and the mechanical and thermomechanical properties of a bio-based glass fibre-reinforced polymer (GFRP) composite, produced by vacuum infusion, using an in-house high-performance bio-based unsaturated polyester resin ( ...

ELSEVIER SCI LTD2022

The challenges of quasi-static and fatigue experiments of structural adhesives

Anastasios Vassilopoulos

This paper presents the results of an experimental campaign designed specifically to investigate unexpected and unwanted failures observed during the quasi-static and fatigue tensile loading of structural adhesives. Simple finite element models were also d ...

ELSEVIER SCI LTD2022

Capillary flow in UHPFRC with synthetic fibers, under high tensile stresses

Emmanuel Denarié, Amir Hajiesmaeili

A novel Ultra High-Performance Fiber Reinforced Concrete (UHPFRC) mix with synthetic fibers and a low clinker matrix, henceforth referred to as PE-UHPFRC, has been developed for structural applications. It exhibits a high tensile elastic limit above 7 MPa, ...

Pergamon-Elsevier Science Ltd2021

Super adsorption performance of carboxymethyl cellulose/copper oxide-nickel oxide nanocomposite toward the removal of organic and inorganic pollutants

Shaik Mohammed Zakeeruddin

A novel nanocomposite bead based on polymeric matrix of carboxymethyl cellulose and copper oxide-nickel oxide nanoparticles was synthesized, characterized, and applied for adsorptive removal of inorganic and organic contaminants at trace level of part per ...

SPRINGER HEIDELBERG2021

Sodium Superionic Conductors (NASICONs) as Cathode Materials for Sodium-Ion Batteries

Kangning Zhao, Guangwei He

Sodium-ion batteries (SIBs) have developed rapidly owing to the high natural abundance, wide distribution, and low cost of sodium. Among the various materials used in SIBs, sodium superion conductor (NASICON)-based electrode materials with remarkable struc ...

SPRINGERNATURE2021