Publications related to Role of damage mechanics in nanoindentation of lamellar bone at multiple sizes: Experiments and numerical modeling

Related publications (22)

Thermo-hydro-mechanical behavior of energy barrettes: Field experiments and numerical simulations

Lyesse Laloui, Alessandro Francesco Rotta Loria, Elena Ravera

Over the past two decades, the thermo-hydro-mechanical behavior of earth-contact structures such as piles, walls, slabs, and tunnels, which simultaneously provide structural support and energy supply, has been studied through various field experiments and ...

ELSEVIER2023

Age- and sex-specific normative values of bone mineral density in the adult glenoid

Dominique Pioletti, Alexandre Terrier, Alain Farron, Philippe Büchler, Patrick Goetti, Frédéric Vauclair

The objective of this study was to determine the normative bone mineral density (BMD) of cortical and trabecular bone regions in the adult glenoid and its dependence on the subject's age and sex. We analyzed computed tomography (CT) scans of 441 shoulders ...

WILEY2022

Microtensile failure mechanisms in lamellar bone: Influence of fibrillar orientation, specimen size and hydration

Johann Michler, Daniele Casari

A mechanistic understanding of bone fracture is indispensable for developing improved fracture risk assessment in clinics. Since bone is a hierarchically structured material, gaining such knowledge requires analysis at multiple length scales. Here, the ten ...

ELSEVIER SCI LTD2021

Overcorrected Implants for Total Shoulder Arthroplasty

Yasmine Boulanaache

Glenohumeral osteoarthritis is a degenerative shoulder joint disease, which causes the breakdown of articular cartilage and bone. People affected by this disease suffer from severe pain and eventually reduced mobility and poor life quality. This disease is ...

EPFL2021

Multi-scale modeling of aggregate interlock phenomena in concrete

Mohit Pundir

In concrete structures, opened cracks contribute significantly to the transfer of shear and normal stresses through the contact forces occurring between fractured surfaces. Such contact forces are due to protruding asperities, engaged by interlocking and f ...

EPFL2021

Reinforced Attention for Few-Shot Learning and Beyond

Tong Zhang

Few-shot learning aims to correctly recognize query samples from unseen classes given a limited number of support samples, often by relying on global embeddings of images. In this paper, we propose to equip the backbone network with an attention agent, whi ...

IEEE COMPUTER SOC2021

Complexity analysis of stochastic gradient methods for PDE-constrained optimal control problems with uncertain parameters

Fabio Nobile, Sebastian Krumscheid, Matthieu Claude Martin

We consider the numerical approximation of an optimal control problem for an elliptic Partial Differential Equation (PDE) with random coefficients. Specifically, the control function is a deterministic, distributed forcing term that minimizes the expected ...

2021

Sub-trabecular strain evolution in human trabecular bone

Goran Lovric, Alessandra Patera

To comprehend the most detrimental characteristics behind bone fractures, it is key to understand the material and tissue level strain limits and their relation to failure sites. The aim of this study was to investigate the three-dimensional strain distrib ...

NATURE RESEARCH2020

Time-lapse reconstruction of the fracture front from diffracted waves arrivals in laboratory hydraulic fracture experiments

Brice Tanguy Alphonse Lecampion, Dong Liu, Thomas Emmanuel Blum

4-D acoustic imaging via an array of 32 sources/32 receivers is used to monitor hydraulic fracture (HF) propagating in a 250 mm cubic specimen under a true-triaxial state of stress. We present a method based on the arrivals of diffracted waves to reconstru ...

2020

Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion

Roland Logé, Steven Van Petegem, Jamasp Jhabvala, Antonia Neels, Güven Kurtuldu, Navid Sohrabi, Annapaola Parrilli

Bulk metallic glasses (BMGs) are high-strength, highly elastic materials due to their disordered atomic structure. Because BMGs require sufficiently high cooling rates to bypass crystallization, laser-based additive manufacturing (AM) methods have recently ...

2020

Experimental study of impulse waves generated by viscoplastic fluid

Zhenzhu Meng

Landslide-generated waves, also called impulse waves, occur as a result of the intrusion of landslides (such as rock falls, debris flows, and avalanches) into bodies of water (such as lakes, reservoirs, and seas). The objective of this thesis was to study ...

EPFL2020

Comparing spatio-temporal networks of intermittent avalanche events: Experiment, model, and empirical data

Anjali Bagunu Tarun

Relaxational processes in many complex systems often occur in the form of avalanches resulting from internal cascades from across the system scale. Here, we probe the space, time, and magnitude signatures of avalanching behavior using a network of temporal ...

2020

In response to ‘Six critical questions about smart spezialisation’

Dominique Foray

This paper has been written as a response to « Six critical questions about smart specialization » by R. Hassink and H. Gong. The paper starts with a reminder of what has not changed in terms of the basic principles and raison d’être of smart specializatio ...

2019

Non-setting, injectable biomaterials containing particulate hydroxyapatite can increase primary stability of bone screws in cancellous bone

Dominique Pioletti, Ulrike Kettenberger

BACKGROUND: Fracture fixation in weak bone is still a clinical challenge. Screw augmentation was shown to successfully increase their primary stability. The currently used calcium phosphate or polymeric bone cements, however, present important drawbacks su ...

2018

On the benefits of a stress criterion for the simulation of cup drawing process

Roland Logé

Experimental and numerical cup drawing process has been investigated on 0.65 mm zinc sheets. The cup exhibits anisotropic earrings due to the material microstructure. The material formability is studied through elliptical bulge tests in the rolling, diagon ...

Springer France2018

MATHICSE Technical Report : Analysis of stochastic gradient methods for PDE-constrained optimal control problems with uncertain parameters

Fabio Nobile, Sebastian Krumscheid, Matthieu Claude Martin

We consider the numerical approximation of a risk-averse optimal control problem for an elliptic partial differential equation (PDE) with random coefficients. Specifically, the control function is a deterministic, dis- tributed forcing term that minimizes ...

MATHICSE2018

Experiments versus theory for the initiation and propagation of radial hydraulic fractures in low permeability materials

Brice Tanguy Alphonse Lecampion

We compare numerical predictions of the initiation and propagation of radial fluid-driven fractures with laboratory experiments performed in different low permeability materials (PMMA, cement). In particular, we choose experiments where the time evolution ...

2017

Importance of trabecular anisotropy in finite element predictions of patellar strain after Total Knee Arthroplasty

Dominique Pioletti, Alexandre Terrier, Adeliya Latypova

Patellar fracture and anterior knee pain remain major complications after Total Knee Arthroplasty (TKA). Patient-specific finite element (FE) models should help improve understanding of these complications through estimation of joint and bone mechanics. Ho ...

Elsevier2017

Fracture mechanics-based progressive damage modelling of adhesively bonded fibre-reinforced polymer joints

Thomas Keller, Anastasios Vassilopoulos, Moslem Shahverdi, Roohollah Sarfaraz Khabbaz, Aida Cameselle Molares

A quasi-static progressive damage model for prediction of the fracture behaviour and strength of adhesively bonded fibre-reinforced polymer joints is introduced in this paper. The model is based on the development of a mixed-mode failure criterion as a fun ...

Wiley2017

Human bone progenitor cells for clinical application: what kind of immune reaction does fetal xenograft tissue trigger in immuno-competent rats?

Dominique Pioletti, Lee Ann Laurent-Applegate, Tanja Cloé Hausherr

The potential of human fetal bone cells for successful bone regeneration has been shown in vivo. In particular, it has been demonstrated that the seeding of these cells in porous poly-(L-lactic acid)/ ß-tricalcium phosphate scaffolds improved the bone form ...

Cognizant Communication Corp2017