Publications related to Reflectance and transmittance model for recto-verso halftone prints

Related publications (31)

Future Thread: Printing Electronics on Fibers

Johanna Zikulnig, Emily Caroline Bezerra Alexandre

This article introduces a methodology to increase the integration density of functional electronic features on fibers/threads/wires through additive deposition of functional materials via printed electronics. It opens the possibility to create a multifunct ...

2024

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Improved two-photon polymerization through an optical fiber using coherent beam shaping

Demetri Psaltis, Christophe Moser, Eirini Kakkava, Antoine Vincent Boniface, Georgia Konstantinou

The state of the art for high resolution three-dimensional light-based additive manufacturing mainly relies on two-photon polymerization. It consists of focusing and scanning a femtosecond laser beam on a photosensitive resin to initiate crosslinking and f ...

ELSEVIER SCI LTD2023

Inflight Microwave Drying Process of Micro-droplets for High Resolution 3D printing

Kwanghoon Choi

A new Additive-Manufacturing (AM) or 3D printing concept is proposed to improve the printing resolution for metal additive manufacturing in the frame of the SFA-AM project, Powder Focusing for Beam-Induced Laser 3D Printing. The project aims to transport s ...

EPFL2022

Sensing of Surface and Bulk Refractive Index Using Magnetophotonic Crystal with Hybrid Magneto-Optical Response

Serguei Sekatski

We propose an all-dielectric magneto-photonic crystal with a hybrid magneto-optical response that allows for the simultaneous measurements of the surface and bulk refractive index of the analyzed substance. The approach is based on two different spectral f ...

2021

A phenomenological extended-reaction boundary model for time-domain wave-based acoustic simulations under sparse reflection conditions using a wave splitting method

Jan Sickmann Hesthaven

In environmental acoustics and in room acoustics, many surfaces exhibit extended-reaction (ER) behavior, i.e., their surface impedance varies with the angle of the incident sound wave. This paper presents a phenomenological method for modeling such angle d ...

ELSEVIER SCI LTD2021

Light Path Gradients for Forward and Inverse Rendering

Tizian Lucien Zeltner

Physically based rendering is a process for photorealistic digital image synthesis and one of the core problems in computer graphics. It involves simulating the light transport, i.e. the emission, propagation, and scattering of light through a virtual scen ...

EPFL2021

Precise and accurate image-based measurements of optical material properties

Marjan Shahpaski

The appearance of objects is governed by how they reflect, transmit and absorb the light they receive. That, in turn, depends on the material's internal structure, surface structure, and viewing and illumination directions. Changes in those characteristics ...

EPFL2020

Slope-Space Integrals for Specular Next Event Estimation

Wenzel Alban Jakob, Tizian Lucien Zeltner, Guillaume Rémi Bruno Loubet

Monte Carlo light transport simulations often lack robustness in scenes containing specular or near-specular materials. Widely used uni- and bidirectional sampling strategies tend to find light paths involving such materials with insufficient probability, ...

ASSOC COMPUTING MACHINERY2020

Effects of multiple scattering on angle-independent structural color in disordered colloidal materials

Sofia Magkiriadou

Disordered packings of colloidal spheres show angle-independent structural color when the particles are on the scale of the wavelength of visible light. Previous work has shown that the positions of the peaks in the reflectance spectra can be predicted acc ...

AMER PHYSICAL SOC2020

Finite element modeling of dynamic frictional rupture with rate and state friction

Jean-François Molinari, Fabian Barras, Roozbeh Rezakhani

Numerous laboratory experiments have demonstrated the dependence of the friction coefficient on the interfacial slip rate and the contact history, a behavior generically called rate and state friction. Although numerical models have been widely used for an ...

PERGAMON-ELSEVIER SCIENCE LTD2020

First mirror test in JET for ITER: Complete overview after three ILW campaigns

Olivier Sauter, Martinus Adela Maria Gijs, Ambrogio Fasoli, Stefano Coda, Basil Duval, Henri Weisen, Richard Pitts, Yves Martin, Javier García Hernández, Duccio Testa, Miguel Fernández Ruiz, Nicola Vianello, Robin Humphry-Baker, Sun Hee Kim, Patrick Blanchard, Alessandro Pau, Davide Galassi, Cristian Sommariva, Jan Horacek, Yann Camenen, Bruno Emanuel Ferreira De Sousa Correia, Jonathan Graves, José Pedro Rebelo Ferreira Marques, Mikhail Maslov, Marco Wischmeier, Dalziel Joseph Wilson, Liang Yao, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Ana Francisca Leal Silva Soares, Jonnathan Cesar Hidalgo Acosta, Antonio José Pereira de Figueiredo, Partha Dutta, Pierre-Thomas Paul Brun, Pedro Camilo de Oliveira e Silva, Alberto Hernando de Castro, Julio Rodriguez, Vlad Trifa, Li Shuai, Rebecca Hill, Federico Nespoli, Hamish William Patten, Samuel Lanthaler, David Pfefferlé, Jonathan Marc Philippe Faustin

The First Mirror Test for ITER has been carried out in JET with mirrors exposed during: (i) the third ILW campaign (ILW-3, 2015-2016, 23.33 h plasma) and (ii) all three campaigns, i.e. ILW-1 to ILW-3: 2011-2016, 63,52 h in total. All mirrors from main cham ...

Elsevier2019

Sampling the Multiple Facets of Light

Gilles Baechler

The theme of this thesis revolves around three important manifestations of light, namely its corpuscular, wave and electromagnetic nature. Our goal is to exploit these principles to analyze, design and build imaging modalities by developing new signal proc ...

EPFL2018

Toward Wideband Steerable Acoustic Metasurfaces with Arrays of Active Electroacoustic Resonators

Romain Christophe Rémy Fleury, Hervé Lissek, Etienne Thierry Jean-Luc Rivet, Thomas Laurence

We introduce an active concept for achieving acoustic metasurfaces with steerable reflection properties, effective over a wide frequency band. The proposed active acoustic metasurface consists in a surface array of subwavelength loudspeakers diaphragms, ea ...

2018

Color Changing Prints on a Metallic Substrate

Petar Pjanic

Printing on a flat metallic substrate has gained popularity in recent years. The reflection of light on a specularly reflecting metallic substrate differs strongly from the reflection of light on a diffusely reflecting medium such as paper. Direct prints o ...

EPFL2016

Laser-assisted inkjet printing of highly viscous fluids with sub-nozzle resolution

Demetri Psaltis, Christophe Moser, Paul Delrot, Miguel Antonio Modestino

Drop-on-demand inkjet printing is mostly based on thermal and piezo-actuation, allowing for densely packed nozzles in inkjet printers. However, the droplet diameter is typically defined by the nozzle diameter, thus limiting the range of viscosity that can ...

Spie-Int Soc Optical Engineering2016

Locating transient disturbance sources and modelling their interaction with transmission lines : use of electromagnetic time reversal and asymptotic theory

Gaspard Lugrin

This thesis deals with the application of electromagnetic time reversal to locating transient disturbance sources and the use of the asymptotic theory for the modelling of their interaction with transmission lines. We demonstrate that the time-of-arrival, ...

EPFL2016

Nanocrystalline Low-Refractive Magnesium Fluoride Films Deposited by Reactive Magnetron Sputtering: Optical and Structural Properties

Jean-Louis Scartezzini, Paul Muralt, Silviu Cosmin Sandu, Stefan Mertin

In this work, we study MgF2 thin-film synthesis by reactive pulsed DC magnetron sputtering from a metallic magnesium target in a gas mixture of argon, oxygen, and carbon tetrafluoride (CF4). Nanocrystalline films on silicon and glass substrates with excell ...

Wiley-Blackwell2015

Microstructured glazing for daylighting, glare protection, seasonal thermal control and clear view

André Gabriel Kostro

The appropriate choice of glazing in a facade depends on many factors. They include amongst other criteria: location, orientation, climatic condition, energetic efficiency, usage of the building, required user comfort, and the architectural concept. On the ...

EPFL2015

PDMS-based, magnetically actuated variable optical attenuators obtained by soft lithography and inkjet printing technologies

Jürgen Brugger, Victor Javier Cadarso Busto

This paper reports and compares the implementation of magnetic variable optical attenuators (M-VOA) by two fabrication strategies. In the first case, a two-layer structure containing a non-doped polydimethylsiloxane (PDMS) layer on a magnetic PDMS (M-PDMS) ...

Elsevier2014