Publications related to In-situ actuated gap reduction and clogging-free apertures for quasi-dynamic stencil lithography

Related publications (33)

High-quality epitaxial BaTiO3 films grown by high-vacuum chemical vapor deposition for integrated electro-optical devices

Patrik Willi Hoffmann, Wojciech Bozydar Szmyt

Synthesizing high-quality epitaxial BaTiO3 (BTO) by means of high-vacuum chemical vapor deposition (HV-CVD) requires a precise control over precursor fluxes impinging onto the heated substrate surface so that the incorporation rates of all elements corresp ...

2025

Structural and magnetic properties of β-Li2IrO3 after grazing-angle focused ion beam thinning

Christian Rüegg

Manipulating the size and orientation of quantum materials is often used to tune emergent phenomena, but precise control of these parameters is also necessary from an experimental point of view. Various synthesis techniques already exist, such as epitaxial ...

2025

From Surfactants to 3D Printing: How Ion-Chelator Pair Interactions Affect the Mechanical Properties of Bioinspired Materials

Gaia De Angelis

The remarkable adaptability observed in marine ecosystems has often inspired researchers when developing new soft materials. The research undertaken in this thesis explores how ion chelator pair interactions influence the mechanical properties of bioinspir ...

EPFL2024

Influence of micro-patterned support properties and interfacial polymerization conditions on performance of patterned thin-film composite membranes

Kumar Varoon Agrawal, Cédric Karel J Van Goethem

Patterned membranes prepared via spray-modified non -solvent induced phase separation (s-NIPS) have successfully shown enhanced fluxes and better fouling control, thanks to the increased surface area and high fluid shear at the membrane/feed interface. The ...

Elsevier2024

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Zoé Mury, Jan Van Herle, Suhas Nuggehalli Sampathkumar, Khaled Lawand

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

Advancements in Nanomechanical Characterization and Biomolecular Imaging with Atomic force Microscopy

Veronika Cencen

Atomic force microscopy (AFM) is a widely used imaging tool for obtaining a variety of information for a range of samples. Although it was initially intended to serve as a method of observing very flat solid surfaces, its use expanded into several other fi ...

EPFL2024

Optimizing Atomic Layer Deposition Processes with Nanowire-Assisted TEM Analysis

Ivo Utke, Johann Michler, Xavier Maeder

Atomic layer deposition (ALD) is one of the premier methods to synthesize ultra-thin materials on complex surfaces. The technique allows for precise control of the thickness down to single atomic layers, while at the same time providing uniform coverage ev ...

Wiley2024

Membrane specificity of the human cholesterol transfer protein STARD4

Charlotte Julie Caroline Gehin

STARD4 regulates cholesterol homeostasis by transferring cholesterol between the plasma membrane and endoplasmic reticulum. The STARD4 structure features a helix-grip fold surrounding a large hydrophobic cavity holding the sterol. Its access is controlled ...

Academic Press Ltd- Elsevier Science Ltd2024

Functionalized Å-scale Pores in Graphene for Carbon Capture

Kuang-Jung Hsu

Single-layer graphene, hosting a high density of functionalized molecular-sieving atom-thick pores, is considered to be an excellent material for gas separation membranes. These functionalized atom-thick pores enable the shortest transport pathway across t ...

EPFL2024

Large Libraries of Structurally Diverse Macrocycles Suitable for Membrane Permeation

Christian Heinis, Alessandro Angelini, Alexander Lund Nielsen, Mischa Schüttel, Manuel Leonardo Merz, Xinjian Ji, Anne Sofie Luise Zarda, Ganesh Kumar Mothukuri, Zsolt Bognár, Edward Jeffrey Will

Macrocycles offer an attractive format for drug development due to their good binding properties and potential to cross cell membranes. To efficiently identify macrocyclic ligands for new targets, methods for the synthesis and screening of large combinator ...

Wiley-VCH Verlag GmbH2024

The rise of aerial additive manufacturing in construction: a review of material advancements

Mirko Kovac, Yusuf Furkan Kaya

The construction industry has recently increased the adoption of additive manufacturing (AM, also known as 3D-printing) technologies. This review paper presents the state of the art of ground-based AM systems in construction, focusing comprehensively on de ...

2024

Investigating the intra-molecular and inter-molecular effects of post-translational modifications on intrinsically disordered protein regions and structured protein regions

Zhidian Zhang

Post-translational modifications (PTMs) play a pivotal role in regulating protein structure, interaction, and function. Aberrant PTM patterns are associated with diseases. Moreover, individual PTMs have a complex interaction with each other, known as PTM c ...

EPFL2024

Piezoelectric and elastic properties of Al0.60Sc0.40N thin films deposited on patterned metal electrodes

Federico Peretti, Luis Guillermo Villanueva Torrijo, Silvan Stettler, Marco Liffredo, Nan Xu

Sc-doped aluminum nitride (AlScN) allows for piezoelectric devices with large electromechanical coupling and the benefits increase with larger Sc doping in the film. However, with a larger Sc concentration, the process window narrows, and it is necessary t ...

2024

Crystal, defect, and morphology engineering of porous two-dimensional materials for ionic separation

Heng-Yu Chi

Ordered two-dimensional (2D) materials hosting Å-scale pores are highly promising for enabling challenging separation, thanks to well-defined pore geometry resulting in tight confinement of ions when hosted inside the pore. In addition, the 2D nature of th ...

EPFL2024

Rescue of secretion of rare-disease-associated misfolded mutant glycoproteins in UGGT1 knock-out mammalian cells

Maurizio Molinari

Endoplasmic reticulum (ER) retention of misfolded glycoproteins is mediated by the ER-localized eukaryotic glycoprotein secretion checkpoint, UDP-glucose glycoprotein glucosyl-transferase (UGGT). The enzyme recognizes a misfolded glycoprotein and flags it ...

Wiley2024

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Mengdi Kong

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

IOP Publishing Ltd2024

Multi-gas processing and transport system

François Maréchal

A gas processing and transport system comprising a natural gas pipeline (1), a plurality of gas conditioning stations (4) connected to the natural gas pipeline between an upstream main natural gas supply and a downstream consumer end, the gas processing st ...

2024

Micro- or nanostructured optical element

Niels Quack, Dorian Giraud Herle

A micro- or nanostructured optical element (1) is proposed comprising: a membrane (3) with an array of holes (5), the membrane (3) comprising a membrane light wave facing surface; an array of pillars (7) sized and shaped such that a respective pillar (7) i ...

2023

Homogenization theory captures macroscopic flow discontinuities across Janus membranes

Kevin Wittkowski, François Gallaire, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna

Janus membranes, thin permeable structures with chemical and geometrical asymmetric properties, show great potential in industrial separation processes. Yet the link between the micro- and macro-scale behaviours of these membranes needs to be established r ...

Cambridge University Press2023

Advancing Cell-Free Synthetic Biology: From sustained PURE protein synthesis to an isothermal one-pot DNA replication system

Laura Sophie Grasemann

One of the goals of synthetic biology is the development of an artificial cell. Building an artificial cell from scratch will provide a deeper understanding of fundamental mechanisms and models in biology and promises to contribute towards building novel p ...

EPFL2024