Publications related to Dynamic anticrack propagation in snow

Related publications (23)

Fault roughness controls injection-induced seismicity

Surface roughness ubiquitously prevails in natural faults across various length scales. Despite extensive studies highlighting the important role of fault geometry in the dynamics of tectonic earthquakes, whether and how fault roughness affects fluid-induc ...

National Academy of Sciences2024

Experimental Investigation on Size-Effect of Rubble Stone Masonry Walls Under In-Plane Horizontal Loading: Overview and Preliminary Results

Katrin Beyer, Savvas Saloustros

Rubble stone masonry is a common construction typology of historical city centres and vernacular architecture. While past earthquakes have shown that it is one of the most vulnerable masonry construction typologies, there are few experimental campaigns giv ...

2024

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Marie Estelle Solange Violay, Corentin Jean-Marie Rémi Noël, Barnaby Padraig Fryer

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...

2024

Three-dimensional fluid-driven frictional ruptures: theory and applications

Alexis Alejandro Sáez Uribe

Fluid-driven frictional ruptures are important in a broad range of subsurface engineering technologies and natural earthquake-related phenomena. Some examples of subsurface operations where borehole fluid injections can induce frictional slip are deep geot ...

EPFL2023

Elongated hydraulic fracture emerging from layers of alternating fracture toughness

Brice Tanguy Alphonse Lecampion, Carlo Peruzzo

Whether used to enhance the hydrocarbon production from low permeability rocks or to measure the minimum in-situ principal stress in rock formations, height growth of a hydraulic fracture above the formation of interest is a key metric for the design of su ...

2023

Fluid flow through microcracked and fractured granitic reservoirs

Marie Estelle Solange Violay, Michael Heap, Lucille Jocelyne Nadine Carbillet

The permeability of crustal rocks and rock-masses dictates the efficiency of hydrothermal circulation and therefore the productivity of geothermal resources. In this study, we find by monitoring P-wave velocity that thermal microcracking in Lanhélin granit ...

2023

Influence of pore-scale heterogeneity on the precipitation patterns in Microbially Induced Calcite Precipitation (MICP)

Ariadni Elmaloglou

The principle of tailoring material properties to improve the mechanical behaviour of soils through compaction or cement grouting dates to the 60s. The increasing trends of urbanization worldwide require new solutions for the development of resilient and s ...

EPFL2023

Single-Well Pore Pressure Preconditioning for Enhanced Geothermal System Stimulation

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Mathias Alexandre David Lebihain

The stress state is an important parameter in terms of both earthquake nucleation and rupture. Here, a new stimulation technique is proposed for Enhanced Geothermal Systems (EGSs), which have previously been burdened with a number of high-profile incidence ...

2023

A fully-coupled highly-parallelized geomechanical simulator for assessing induced seismicity

Jean-François Molinari, Brice Tanguy Alphonse Lecampion, Guillaume Anciaux, Nicolas Richart, Emil Gallyamov

Induced seismicity caused by anthropogenic modification of the subsurface effective stress state has been observed in a number of industrial applications -- from hydrocarbon extraction (e.g., Groningen [1]), drilling waste-water disposal (e.g., [2]) to the ...

2023

Long-term triggered seismicity on the Mosha fault by Damavand volcano, Iran: Implications on the seismic hazard of Tehran metropolis

Seyyedmaalek Momeni

The seismic history of the Mosha fault, the largest and most active fault of Eastern Tehran metropolis, and its relation to the Damavand active volcano, the highest mountain in the Middle East, is investigated. We deduce that the central Mosha, near the Da ...

2022

Transition from sub-Rayleigh anticrack to supershear crack propagation in snow avalanches

Johan Alexandre Philippe Gaume, Bertil Trottet, Grégoire Bobillier

Avalanches can occur when a porous snow layer lies beneath a dense cohesive snow slab. Field experiments and simulations now reveal different crack-propagation regimes in slab avalanches, similar to rupture propagation following an earthquake. ...

NATURE PORTFOLIO2022

Determination of Parameters Characteristic of Dynamic Weakening Mechanisms During Seismic Faulting in Cohesive Rocks

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Chiara Cornelio

While sliding at seismic slip-rates of ∼1 m/s, natural faults undergo an abrupt decrease of shear stress called dynamic weakening. Asperity-scale processes related to flash heating and weakening and, meso-scale (mm-cm) processes involving shear across the ...

AGU2022

On the effects of fluid pressure variations on rock-mass and fault mechanical behaviour

Corentin Jean-Marie Rémi Noël

In the past 20 years, the growing interest in deep geo-reservoirs for purposes such as carbon storage, waste water disposal, or geothermal energy exploitation have led to large-volume fluid injections into the upper continental crust. These fluid injection ...

EPFL2021

Experimental plastic reactivation of pseudotachylyte‐filled shear zones

Marie Estelle Solange Violay, François Xavier Thibault Passelègue

Pseudotachylytes are fine‐grained fault rocks that solidify from melt that is produced in fault zones during earthquakes. Exposed sections of natural fault zones reveal evidence of post‐seismic plastic deformation (i.e. reactivation) of pseudotachylyte, wh ...

2021

Hydraulic stimulation of pre-existing discontinuities in tight rocks

Federico Ciardo

Hydraulic stimulation is an engineering technique whose aim is to enhance the permeability of fractured rock masses at depths ranging from one to five kilometers. It consists in the injection of fluid at sufficiently high pressure in order to shear pre-exi ...

EPFL2020

Propagation of fluid driven fractures in transversely isotropic material

Fatima-Ezzahra Moukhtari

The propagation of fluid driven fractures is used in a number of industrial applications (well stimulation of unconventional reservoirs, development of deep geothermal systems) but also occurs naturally (magmatic dyke intrusion). While the mechanics of hyd ...

EPFL2020

Petrophysical properties of heavy oil-bearing carbonate rocks and their implications on petroleum system evolution: Insights from the Majella Massif

Carolina Giorgetti

In this work, we investigate the role of hydrocarbons in changing the petrophysical properties of rocks by merging laboratory measurements, outcrops characterization, and subsurface data focusing on a carbonate-bearing reservoir (Bolognano Formation) of th ...

2020

Seismic performance of slender RC U-shaped walls with a single-layer of reinforcement

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida

Reinforced concrete walls are commonly used to resist the lateral loading induced by wind and earthquake actions. While most walls include two vertical reinforcement layers, some regions of the world construct slender, non-rectangular concrete walls with a ...

2020

Hydro-mechanical response of Opalinus Clay shale: dependency on composition and burial depth

Eleonora Crisci

Shales are sedimentary formation currently studied for their involvement in many geo-energy related applications, such as radioactive waste disposal, CO2 sequestration, oil and gas extraction. In Switzerland the Opalinus Clay shale has been selected has ho ...

EPFL2019

Pore space properties in carbonate fault rocks of peninsular Italy

Marie Estelle Solange Violay

The fault cores of extensional faults in Mesozoic limestones and dolostones are examined by mean of combined microstructural, ultrasonic and petrophysical analyses. Grain-supported fault rocks commonly localize in the outer fault cores, whereas matrix-supp ...

2019