Publications related to Experimental validation of an analytical kinetic model for edge-localized modes in JET-ITER-like wall

Related publications (46)

Design and implementation of a model-based hierarchical architecture for plasma shape control in the TCV tokamak

Olivier Sauter, Stefano Coda, Federico Alberto Alfredo Felici, Antoine Pierre Emmanuel Alexis Merle, Cristian Galperti, Adriano Mele, Alessandro Tenaglia

Plasma shape control is a fundamental tool for effective tokamak operation, allowing improved plasma performance and the pursuit of challenging scientific objectives. In this framework, the Tokamak á Configuration Variable (TCV) of the École Polytechnique ...

IOP Publishing2025

Investigating the influence of divertor baffles on nitrogen-seeded detachment in TCV with SOLPS-ITER simulations and TCV experiments

Basil Duval, Holger Reimerdes, Christian Gabriel Theiler, Olivier Claude Martin Février, Guang-Yu Sun, Claudia Colandrea, Sophie Danielle Angelica Gorno, Luke Simons, Massimo Carpita, Elena Tonello, Richard Alexander David Ducker

Plasma edge simulations with the SOLPS-ITER code are performed to study the influence of divertor baffles on nitrogen-seeded detachment in Tokamak & agrave; Configuration Variable (TCV) single-null, L-mode discharges. Scans of nitrogen seeding rate are con ...

IOP Publishing Ltd2025

Turnstile flux as a measure for chaotic transport in magnetic confinement fusion devices

Ludovic Rais, Joaquim Loizu Cisquella, Christopher Berg Smiet

We analyze a measure for the degree of chaos in the magnetic fields of magnetic confinement fusion reactors by calculating the lobe fluxes of turnstiles - a method developed for characterizing transport into and out of resonance zones in Hamiltonian dynami ...

2025

The quasi-continuous exhaust regime in ASDEX Upgrade and JET

Olivier Sauter, Benoît Labit

The quasi-continuous exhaust (QCE) regime is a type-I ELM-free high confinement regime obtained at high plasma shaping and high separatrix density. A comparison with various ELM-free regimes in the literature is presented together with potential physics mo ...

Elsevier2025

Real-time density profile simulations on ASDEX Upgrade and the impact of the edge boundary condition

Olivier Sauter, Francesco Pastore

The plasma density is a crucial parameter of tokamak discharge as it impacts the fusion power, stability limits, influences detachment onset and impurities transport. The electron density profile shaping affects the deposition location of the external heat ...

Elsevier BV2025

Machine learning methods for locked-mode predictions in MAST-U plasmas

Alessandro Pau

In tokamaks, rotating magneto-hydro-dynamic modes frequently decelerate as their amplitude increases. Once a critical threshold in amplitude is reached, these modes stop rotating into a specific toroidal and poloidal position and are commonly named Locked ...

IOP Publishing Ltd2025

Helicon normal modes in radially non-uniform plasma column

Ivo Furno, Philippe Frédérique Bruno Guittienne, Rémy Jacquier, Renat Karimov

Helicon discharges are often considered somewhat mysterious, exhibiting experimental behaviors that are challenging to explain, such as abrupt plasma density jumps, hysteresis, and ‘blue core’ formation, among others. A significant part of the difficulty i ...

2025

Lessons Learned Executing the Non-disruptive Compass Scan Method at Jet Towards Error Field Identification Experiments in Iter

Olivier Sauter, Alessandro Pau

In preparation for error field (EF) identification experiments in ITER, a series of experiments have been conducted at JET to test the portability of the non-disruptive compass scan, a method originally designed and tested in DIII-D (Paz-Soldan et al 2022 ...

IOP Publishing Ltd2025

A Quasilinear Model for Momentum Transport Including Rotation and Electron-scale Turbulence

Stephan Brunner, Justin Richard Ball, Haomin Sun

In a previous paper, a new gyrokinetic quasilinear model was proposed to study turbulent momentum transport in tokamaks with up-down asymmetric plasma shaping and toroidal flow shear (Sun et al 2024 Nuclear Fusion 64 036026). In this work, we start by appl ...

IOP Publishing Ltd2025

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Multi-machine benchmark of the self-consistent 1D scrape-off layer model DIV1D from stagnation point to target with SOLPS-ITER

Holger Reimerdes

This paper extends a 1D dynamic physics-based model of the scrape-off layer (SOL) plasma, DIV1D, to include the core SOL and possibly a second target. The extended model is benchmarked on 1D mapped SOLPS-ITER simulations to find input settings for DIV1D th ...

Iop Publishing Ltd2024

EUROfusion contributions to ITER nuclear operation

Alessandro Pau

ITER is of key importance in the European fusion roadmap as it aims to prove the scientific and technological feasibility of fusion as a future energy source. The EUROfusion consortium of labs within Europe is contributing to the preparation of ITER scient ...

IOP Publishing Ltd2024

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Stefano Coda, Jeffrey Huang

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

IOP Publishing Ltd2024

Global fluid simulation of plasma turbulence in stellarators with the GBS code

Paolo Ricci, Joaquim Loizu Cisquella, António João Caeiro Heitor Coelho, Zeno Tecchiolli

The implementation of three-dimensional magnetic fields, such as the ones of stellarators, in the GBS code (Ricci et al 2012 Plasma Phys. Control. Fusion54 124047; Giacomin et al 2022 J. Comput. Phys.464 111294) is presented, and simulation results are dis ...

IOP Publishing Ltd2024

Resonant interaction between runaway electrons and the toroidal magnetic field ripple in TCV

Umar Sheikh, Artur Perek, Carl Mathias Paul Hoppe

This work explains the anomalously high runaway electron (RE) pitch angles inferred in the flat-top of dedicated Tokamak a Configuration Variable (TCV) experiments. Kinetic modelling shows that the resonant interaction between the gyromotion of the electro ...

IOP Publishing Ltd2024

Bending Tolerance of React&Wind Nb3Sn Conductors for Fusion Magnets

Pierluigi Bruzzone, Kamil Sedlák, Xabier Sarasola Martin, Hugues Marie Alain Bajas, Chiara Frittitta, Federica Demattè

The react-and-wind technique for manufacturing of large Nb3Sn fusion magnets (RW) is very attractive because of the superior performance of the Nb3Sn with lower thermal strain compared to the wind-and-react technique. The procedure for magnet winding is al ...

IEEE Institute of Electrical and Electronics Engineers2024

Innovative dud detection based on JET DT experience

Olivier Sauter, Alessandro Pau

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

Numerical study of a general criterion for divertor detachment control

Olivier Claude Martin Février

The parameter R D = P rad / P cond , which measures the ratio of radiated power to conductive heat flux at downstream Scrape-Off-Layer (SOL), is proposed as a robust and practically useful figure of merit for divertor detachment control. The simulations pe ...

IOP Publishing Ltd2024

Divertor turbulence characterisation using Gas Puff Imaging in the TCV tokamak

Curdin Tobias Wüthrich

The performance of magnetic confinement fusion devices, such as tokamaks, is strongly correlated to the phenomena that occur in the boundary region of the plasma core that faces the wall of the device. The dominant cross-field transport mechanisms from the ...

EPFL2024