Publications related to Last Heir or First Engineer? An Intellectual Portrait of Vincenzio Viviani through his Working Papers

Related publications (35)

Radiation Efficiency and Gain Bounds for Microstrip Patch Antennas

This article presents bounds on radiation efficiency and gain for microstrip patch antennas, demonstrating close alignment with the performance of classic antenna designs. These bounds serve as effective benchmarks for assessing antenna performance and eva ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2025

A method and system for optimizing design, implantation, and stimulation protocols of electrodes stimulating the nervous system

Silvestro Micera, Simone Romeni

A method for optimizing at least one of a geometry, an implantation procedure, and/or stimulation protocol of one or more electrodes for an electrical stimulation of a target structure in a nervous system of a living being by a computer device, the method ...

2024

Optical characterization of a solar concentrating dish system

Sophia Haussener, Clemens Gregor Suter, Isaac Thomas Holmes-Gentle

Solar dishes concentrate the quasi-collimated sun light towards a focal point. Typically, the optical characterization consists of experimental flux map measurements and Monte-Carlo ray-tracing (MCRT) simulations, which are fitted based on experimental dat ...

Institute of Physics2024

Strain-based analysis on the influence of local undercut geometry on fatigue crack initiation life

Alain Nussbaumer

The local undercut defects at the weld toe provide a potential initiation site for fatigue cracks and significantly impact the structure's fatigue strength. The influence of continuous undercut depth on fatigue performance is widely studied, but the resear ...

2024

FENNECS: a novel particle-in-cell code for simulating the formation of magnetized non-neutral plasmas trapped by electrodes of complex geometries

Guillaume Michel Le Bars, Stefano Alberti, Jean-Philippe Hogge, Joaquim Loizu Cisquella, Jérémy Genoud, Francesco Romano

This paper presents the new 2D electrostatic particle -in -cell code FENNECS developed to study the formation of magnetized non -neutral plasmas in geometries with azimuthal symmetry. This code has been developed in the domain of gyrotron electron gun desi ...

2024

Into the ice: Exploration and data capturing in glacial moulins by a tethered robot

Josephine Anna Eleanor Hughes, Max Mirko Polzin

Glacial moulins (cylindrical meltwater drainage shafts) provide valuable insights into glacier dynamics, but are inaccessible and hazardous environments for humans to study. Exploring them using passive sensor probes has revealed their complex geometry, wh ...

Wiley2024

Stress tolerance of lightweight glass-free PV modules for vehicle integration

Kléber Nicolet-dit-Félix, Christophe Ballif, Matthieu Despeisse, Aïcha Hessler-Wyser, Jacques Levrat, Antonin Faes, Gianluca Cattaneo, Umang Bhupatrai Desai, Fahradin Mujovi

Electric vehicles (EVs) currently dominate the sales in the automotive market. A big leap in this market can be made by developing a photovoltaic product that can be integrated to an EV, as it can boost the driving range of the EV while reducing the chargi ...

Edp Sciences S A2024

Geometric Learning: Leveraging differential geometry for learning and control

Bernardo Fichera

In this thesis, we concentrate on advancing high-level behavioral control policies for robotic systems within the framework of Dynamical Systems (DS). Throughout the course of this research, a unifying thread weaving through diverse fields emerges, and tha ...

EPFL2024

Sub-mm3 dimensional scaling of fully-integrated additively-fabricated microsupercapacitors for embedded energy storage applications

Vivek Subramanian, Amin Hodaei

Microsupercapacitors (MSCs) are attractive energy devices for applications in IoT, wireless sensors, and other microelectronic systems due to their small footprints. In this work, the dimensional scaling of fully-integrated additively-fabricated MSCs is sy ...

Royal Society of Chemistry2024

Incorporating Projective Geometry into Deep Learning

Michal Jan Tyszkiewicz

In this thesis we explore the applications of projective geometry, a mathematical theory of the relation between 3D scenes and their 2D images, in modern learning-based computer vision systems. This is an interesting research question which contradicts the ...

EPFL2024

Atomic level insight into irradiation effects in nuclear fuel materials

Shaileyee Bhattacharya

Microstructural evolution during in-pile irradiation, radiation damage effects and fission products behavior in UO2 nuclear fuel are key issues in understanding and for the modeling of the performance as well as safety characteristics of nuclear fuels in t ...

EPFL2024

Multimaterial Volumetric Printing of Silica-Based Glasses

Christophe Moser, Damien Claude-Marie Loterie, Paul Delrot, Antoine Vincent Boniface, Jorge Andres Madrid Wolff

Silicate glasses have played a major role as structural and functional materials in human civilization since ancient Egypt. Despite their widespread use and importance in modern society, silica glasses with complex geometries are only fabricated in automat ...

Wiley2024

Technology challenges and integration of the plasma position reflectometer in RFX-mod2

Riccardo Agnello

The integration of the new plasma position reflectometer in the RFX-mod2 experiment (the upgraded version of the previous RFX-mod that operated until 2015) is presented in this contribution. Particular attention has been devoted to the high field side subs ...

Elsevier Science Sa2024

High brightness neutron source optimized for very high pulsed magnetic field experiments

Mina Akhyani

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024

T-5 configurations and hyperbolic systems

Riccardo Tione, Carl Johan Peter Johansson

In this paper, we study the rank-one convex hull of a differential inclusion associated to entropy solutions of a hyperbolic system of conservation laws. This was introduced in [B. Kirchheim, S. Muller and V. S(sic)ver & aacute;k, Studying Nonlinear PDE by ...

WORLD SCIENTIFIC PUBL CO PTE LTD2023

Some Physical Implications Of Absolute Geometries In The Description Of Complex Systems Dynamics

Maria-Alexandra Paun

Some implications of absolute geometries in the description of complex systems dynamics, at various scale resolutions are highlighted. In such context, by means of an analytic geometry of 2 x 2 matrices, a generalization of the standard velocities space in ...

UNIV POLITEHNICA BUCHAREST, SCI BULL2023

Understanding the role of Hubbard corrections in the rhombohedral phase of BaTiO3

Nicola Marzari, Iurii Timrov, Michele Kotiuga, Lorenzo Bastonero

We present a first-principles study of the low-temperature rhombohedral phase of BaTiO3 using Hubbardcorrected density-functional theory. By employing density-functional perturbation theory, we compute the onsite Hubbard U for Ti(3d) states and the intersi ...

Amer Physical Soc2023

Shear strength and shear stiffness analysis of compacted Wyoming-type bentonite

Alessio Ferrari

Wyoming-type bentonite is one of the materials to be used as part of the Engineered Barrier System (EBS) in deep geological disposal facilities for the safe disposal of spent nuclear fuel.In the KBS-3 type repository, the canisters containing the spent fue ...

ELSEVIER2023

A multi scale consolidation model for press moulding of hybrid textiles into complex geometries

Vincent Werlen

Side-by-side hybrid textiles are an intermediate step for the production of fibre-reinforced thermoplastic composites. Press moulding these materials combining reinforcing fibre textiles and thermoplastic matrix textiles or flexible layers is a promising m ...

EPFL2023

Hybrid Quadratic Programming - Pullback Bundle Dynamical Systems Control

Aude Billard, Bernardo Fichera

Dynamical System (DS)-based closed-loop control is a simple and effective way to generate reactive motion policies that well generalize to the robotic workspace, while retaining stability guarantees. Lately the formalism has been expanded in order to handl ...

SPRINGER INTERNATIONAL PUBLISHING AG2023