Gyrokinetic analysis and simulation of pedestals to identify the culprits for energy losses using 'fingerprints'

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

The impact of plasma shaping on the properties of high density H-mode scrape-off layer (SOL) profiles and transport at the outer midplane has been investigated on Tokamaka configuration variable. The experimental dataset has been acquired by evolving the u ...

We discuss how the combination of experimental observations and rapid modeling has enabled to improve understanding of the tokamak ramp-down phase in ASDEX Upgrade. A series of dedicated experiments has been performed, to disentangle the effect of individu ...

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

The react-and-wind technique for manufacturing of large Nb3Sn fusion magnets (RW) is very attractive because of the superior performance of the Nb3Sn with lower thermal strain compared to the wind-and-react technique. The procedure for magnet winding is al ...

Building on prior analysis of ASDEX Upgrade (AUG) experiments (Henderson et al 2023 Nucl. Fusion 63 086024), this study compares simple analytical formula predictions for divertor detachment onset and reattachment timescales in JET experiments. Detachment ...

In light of the challenges posed by climate change and the goals of the Paris Agreement, electricity generation is shifting to a more renewable and decentralized pattern, while the operation of systems like buildings is increasingly electrified. This calls ...

The implementation of three-dimensional magnetic fields, such as the ones of stellarators, in the GBS code (Ricci et al 2012 Plasma Phys. Control. Fusion54 124047; Giacomin et al 2022 J. Comput. Phys.464 111294) is presented, and simulation results are dis ...

Rapid inter-discharge simulation and optimization using the RAPTOR code have allowed the development of a reliable and reproducible early heating strategy for an advanced tokamak (AT) scenario on ASDEX Upgrade. Solving for electron heat and current diffusi ...

Electron cloud continues to be one of the main limiting factors of the Large Hadron Collider (LHC), the biggest accelerator at CERN. These clouds form in the beam chamber when positively charged particles are passing through and cause unwanted effects in b ...

The TCV tokamak is powered by a flywheel generator to supply the magnetic coils and the auxiliary heating systems. The generator has just undergone its fourth major overhaul to make it ready for the next ten years, after more than thirty years of almost tr ...

ITER is of key importance in the European fusion roadmap as it aims to prove the scientific and technological feasibility of fusion as a future energy source. The EUROfusion consortium of labs within Europe is contributing to the preparation of ITER scient ...

Phase contrast imaging (PCI) is an established and powerful technique for measuring density fluctuations in plasmas and has been successfully applied to several fusion devices. Rooted in a concept first developed for microscopy, PCI belongs to the category ...

Electron-cyclotron waves are a tool commonly used in tokamaks, in particular to drive current. Their ability to drive current in a very localized manner renders them an optimal tool for MHD mode mitigation. However, such applications require high accuracy ...

An optimized plasma current ramp-down strategy is critical for safe and fast termination of plasma discharges in a tokamak demonstration fusion reactor (DEMO), both in planned and emergency scenarios, avoiding plasma disruptions and excessive heat loads to ...

On ASDEX Upgrade a prioritized ‘advanced Tokamak’ program has been run during the last two experimental campaigns, focusing on the effect of non-standard current profiles on the behavior of high beta plasmas. Two lines of non-standard (i.e. non-sawtoothing ...

Negative triangularity (NT) scenarios in TCV have been compared to positive triangularity (PT) scenarios using the same plasma shapes foreseen for divertor tokamak test tokamak operations. The experiments provided a NT/PT L-mode pair and a PT H-mode with d ...

TCV’s operating regime with an X-point radiator (XPR) has been broadened by changing the magnetic geometry. XPRs have properties that could make them an attractive power exhaust solution for fusion reactors. These include the conversion of a high fraction ...

This paper discusses the development of a benign termination scenario for runaway electron (RE) beams on ASDEX Upgrade and TCV. A systematic study revealed that a low electron density (n e) companion plasma was required to achieve a large MHD instability, ...

Gyrokinetic analysis and simulation of pedestals to identify the culprits for energy losses using 'fingerprints'

Chat with Graph Search

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background

The effect of plasma shaping on high density H-mode SOL profiles and fluctuations in TCV

Scenario optimization for the tokamak ramp-down phase in RAPTOR: A. Analysis and model validation on ASDEX Upgrade

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Bending Tolerance of React&Wind Nb3Sn Conductors for Fusion Magnets

Comparison of reduced model predictions for divertor detachment onset and reattachment timescales in ASDEX Upgrade and JET experiments

Quantifying the Unknown: Data-Driven Approaches and Applications in Energy Systems

Global fluid simulation of plasma turbulence in stellarators with the GBS code

Inter-discharge optimization for fast, reliable access to ASDEX Upgrade advanced tokamak scenario

Characterization of Transverse Instabilities Driven by Electron Cloud

Maintenance and optimization of the TCV power supply

EUROfusion contributions to ITER nuclear operation

Tangentially viewing phase contrast imaging for turbulence measurements in toroidal fusion devices

Impact of microwave beam scattering by density fluctuations on the electron-cyclotron power deposition profile in tokamaks

Scenario optimization for the tokamak ramp-down phase in RAPTOR. Part B: safe termination of DEMO plasmas

Flux pumping studies and Ti peaking by q-profile shaping using ECCD in ASDEX Upgrade

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Access to an ELM-suppressed X-point radiator regime in TCV snowflake minus configurations

Benign termination of runaway electron beams on ASDEX Upgrade and TCV