Traveling liquid bridges in unsaturated fractured porous media

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In a previous paper, a new gyrokinetic quasilinear model was proposed to study turbulent momentum transport in tokamaks with up-down asymmetric plasma shaping and toroidal flow shear (Sun et al 2024 Nuclear Fusion 64 036026). In this work, we start by appl ...

We investigate two hydraulic stimulation stages performed in April 2022 at the Utah FORGE enhanced geothermal system test site using analytical solutions and numerical modeling of fluid-induced tensile and shear rupture problems. These stimulation stages d ...

Modeling the 3D internal crack under compression entails complex fracture mechanics (mode I-II-III fracture), resulting in substantial computational costs and challenges in characterizing fracture morphology characterization for Phase Field Method (PFM) si ...

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...

Wind turbine rotor blades are usually fabricated using composite materials and epoxy adhesive to bond the elements together. Due to their large size, the thickness of the adhesive layer varies from 1 to up to 30 mm depending on the position. The failure of ...

This paper establishes a mean-field equation set and an energy theorem to provide a theoretical basis in view of the development of self-consistent, physics-based turbulent transport models for mean-field transport codes. A rigorous averaging procedure ide ...

We consider on the torus the scaling limit of stochastic 2D (inviscid) fluid dynamics equations with transport noise to deterministic viscous equations. Quantitative estimates on the convergence rates are provided by combining analytic and probabilistic ar ...

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

This article investigates the effects of voids, joint geometry, and test conditions on the quasi-static Mode I fracture performance of thick adhesive Double Cantilever Beam (DCB) joints such as those prevailing in wind industry and shipbuilding. The specim ...

The construction industry has recently increased the adoption of additive manufacturing (AM, also known as 3D-printing) technologies. This review paper presents the state of the art of ground-based AM systems in construction, focusing comprehensively on de ...

Titanium-based Metal Matrix Composites (MMCs) manufactured by additive manufacturing offer tremendous lightweighting opportunities. However, processing the high reinforcement contents needed to substantially improve elastic modulus while conserving signifi ...

Our understanding of quantum materials is commonly based on precise determinations of their electronic spectrum by spectroscopic means, most notably angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy. Both require atomicall ...

Hydraulic fractures are driven by an internal fluid pressure exceeding the minimum compressive stress, propagating in a direction perpendicular to the latter. This class of tensile fractures has gained interest over the last fifty years due to the developm ...

In impermeable media, a hydraulic fracture can continue to expand even without additional fluid injection if its volume exceeds the limiting volume of a hydrostatically loaded radial fracture. This limit depends on the mechanical properties of the surround ...

Hydraulic fractures are tensile fractures that occur in solid materials due to the natural intrusion or anthropogenic injection of a viscous fluid into a fracture channel. The deliberate creation of hydraulic fractures is part of an industrial technology h ...

Whether used to enhance the hydrocarbon production from low permeability rocks or to measure the minimum in-situ principal stress in rock formations, height growth of a hydraulic fracture above the formation of interest is a key metric for the design of su ...

Solid particulate additives are sometimes used to promote the uniform growth of multiple hydraulic fractures in horizontal oil and gas wells. The principle is that solid particulates block, accumulate, and form larger porous plugging zones preferentially a ...

The influence of voids on the quasi-static Mode I fracture performance of thick adhesive joints was investigated in this article. Double Cantilever Beam (DCB) joints were manufactured with glass fiber reinforced epoxy adherends and SikaPower®-830 epoxy adh ...

Acoustic emission (AE) monitoring is a useful technique to monitor the health of a structure continuously, helping to prevent potential failure. AE are elastic waves produced and emitted during fracture processes inside a material and are recorded by senso ...

Hydraulic fracturing (HF) treatments can form widespread fractures. Understanding their containment at depth is critical, given the positive buoyancy contrast between the fracturing fluid and the surrounding rock, promoting upward growth. We study arrest m ...

Traveling liquid bridges in unsaturated fractured porous media

Chat with Graph Search

A Quasilinear Model for Momentum Transport Including Rotation and Electron-scale Turbulence

The Utah FORGE 2022 hydraulic stimulations: tensile hydraulic fractures or/and fluid-induced dilatant shear ruptures?

An adaptive phase field approach to 3D internal crack growth in rocks

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Improved Material Formulations for Thick Adhesive Joints in Wind Turbine Blades

Mean-field transport equations and energy theorem for plasma edge turbulent transport

Quantitative convergence rates for scaling limit of SPDEs with transport noise

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Mode I fracture of thick adhesively bonded GFRP composite joints for wind turbine rotor blades

The rise of aerial additive manufacturing in construction: a review of material advancements

Tensile Properties of Ex-Situ Ti-TiC Metal Matrix Composites Manufactured by Laser Powder Bed Fusion

Controlling crystal cleavage in focused ion beam shaped specimens for surface spectroscopy

Propagation of planar three-dimensional buoyant hydraulic fractures

Three-dimensional buoyant hydraulic fractures: finite volume release

Three-dimensional hydraulic fracture propagation in homogeneous and heterogeneous media

Elongated hydraulic fracture emerging from layers of alternating fracture toughness

Modeling of solids particle diversion to promote uniform growth of multiple hydraulic fractures

INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR

Automatic and high-precision acoustic emission-based structural health monitoring of concrete structures

Arrest Mechanisms of Buoyant Hydraulic Fractures