Publications related to New Insights into the Interface of Electrochemical Flow Cells for Carbon Dioxide Reduction to Ethylene

Related publications (39)

Low-Power Tunable Micro-Plasma Devices for Efficient and Scalable CO2 Conversion

CO2 conversion plays a vital role in addressing climate change by cutting greenhouse gas emissions and promoting a circular carbon economy. Rather than releasing carbon dioxide into the atmosphere, carbon dioxide recycling technologies allows transformatio ...

EPFL2025

The Chemical Nature of the Oxide Directs the Stability and Reactivity of Copper|Oxide Interfaces in the Electrochemical CO2 Reduction Reaction

Raffaella Buonsanti, Petru Pasquale Albertini, Jari Leemans, Coline Marie Agathe Boulanger, Krishna Kumar

Understanding the impact of composition and interfaces between metals and oxides is a goal of interest for many chemical reactions. Herein, we propose a framework to map correlations between the electrochemical behavior of the oxide and the stability and r ...

American Chemical Society (ACS)2025

Role and Opportunities of Gas bearing supported Turbomachinery in small-scale SOFC-CHP systems

Victoria Xu Hong He

Fuel cells are considered one of the most efficient and environmental-friendly technologies available for converting chemical energy into electricity and heat, and considered a key technology to close the hydrogen cycle. In particular, combined heat and po ...

EPFL2025

Precious Metals recovery using novel metal-organic framework (MOF)

Jocelyn Richard Roth

Gold plays a dominant role in our modern society. Initially used in coinage and jewelry, it has become an essential metal for the electronics industries. Today, more gold is consumed than mined from virgin ores. Therefore, gold recycling methods have becom ...

EPFL2025

Boon and Bane of Local Solid State Chemistry on the Performance of LSM-Based Solid Oxide Electrolysis Cells

Hanna Christine Türk

Advanced Energy Materials published by Wiley-VCH GmbH.High-temperature solid oxide cells are highly efficient energy converters. However, their lifetime is limited by rapid deactivation. Little is known about the local, atomic scale transformation that dri ...

2025

Encapsulated Co–Ni alloy boosts high-temperature CO2 electroreduction

Jiaming Tian, Xile Hu, Jeremy Luterbacher, Wenhao Ren, Wenchao Ma, Seongmin Jin

Electrochemical CO 2 reduction into chemicals and fuels holds great promise for renewable energy storage and carbon recycling 1–3 . Although high-temperature CO 2 electroreduction in solid oxide electrolysis cells is industrially relevant, current catalyst ...

Springer Science and Business Media LLC2025

Emg Acquisition and Processing for Hand Movement Decoding on Embedded Systems: State of the Art and Challenges

Silvestro Micera

The electromyography (EMG) signal is particularly useful in monitoring muscle activity, and it can be acquired noninvasively on the skin surface. Thanks to these key characteristics, EMG-based human-machine interfaces (HMIs) for prosthetic myocontrol, as w ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2025

Harnessing modular approaches in the study of crystalline sorbents

Balázs Álmos Novotny

Sorbent are the workhorses of most contemporary separation processes. Crystalline sorbents boast descript structures that facilitate in silico study. Their diversity is matched by their varied applications. At the forefront of their currently researched ap ...

EPFL2025

Electrochemical sensors modified with iron oxide nanoparticles/ nanocomposites for voltammetric detection of Pb (II) in water: A review

Sandro Carrara

Permissible limits of Pb 2+ in drinking water are being reduced from 10 mu gL -1 to 5 mu gL -1 , which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmen ...

Cell Press2024

Advancing non-carbon energy: optimized and safely operated solid oxide fuel cell design for industrial feasibility

François Maréchal, Jan Van Herle, Stefan Diethelm, Shivom Sharma, Xinyi Wei, Arthur Waeber

As the world shift towards sustainable energy solutions, solid oxide fuel cells (SOFCs) using non-carbon fuels like ammonia and hydrogen emerge as promising pathways to produce clean energy and enhance conversion efficiency. However, current implementation ...

2025

Green hydrogen production using Shewanella oneidensis MR-1 bioanode and cuprous oxide-based photocathode

Michele Morgante

In recent years, many efforts have been made to find alternative renewable energy sources that can ideally replace the use of fossil fuels in all aspects. One of the new emerging energy technologies is the bioelectrochemical system, of which two types are ...

EPFL2024

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Roberto Cestaro

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

EPFL2024

Operando Observation of (Bi)carbonate Precipitation during Electrochemical CO2 Reduction in Strongly Acidic Electrolytes

Corsin Battaglia, Alessandro Senocrate, Nukorn Plainpan

Precipitation of (bi)carbonate salts during the electrochemical CO2 reduction (CO2RR) has been identified as a major cause of degradation and one of the main challenges to be overcome before implementing this technology on the industrial scale. Recently, t ...

Amer Chemical Soc2024

Machine learning models for prediction of electrochemical properties in supercapacitor electrodes using MXene and graphene nanoplatelets

Mohammad Khaja Nazeeruddin

Herein, machine learning (ML) models using multiple linear regression (MLR), support vector regression (SVR), random forest (RF) and artificial neural network (ANN) are developed and compared to predict the output features viz. specific capacitance (Csp), ...

Elsevier Science Sa2024

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Yves Perriard, Stefania Maria Aliki Konstantinidi

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Lei Zhang, Kangning Zhao

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

Amer Chemical Soc2024

Beyond the coupled distortion model: structural analysis of the single domain cupredoxin AcoP, a green mononuclear copper centre with original features

Luciano Andres Abriata

Cupredoxins are widely occurring copper-binding proteins with a typical Greek-key beta barrel fold. They are generally described as electron carriers that rely on a T1 copper centre coordinated by four ligands provided by the folded polypeptide. The discov ...

Royal Soc Chemistry2024

Stabilization versus competing de-metalation, trans-metalation and (cyclo)-dehydrogenation of Pd porphyrins at a copper surface

Francesco Armillotta

Metal-porphyrins are studied intensively due their potential applications, deriving from the variety of electronic and chemical properties, tunable by selecting metal centers and functional groups. Metalation, de- and trans-metalation processes are fundame ...

Royal Soc Chemistry2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Electron imaging of gas diffusion electrodes for proton exchange membrane fuel cells

Michele Bozzetti

The current energy crisis demands the development of new sustainable energy sources and devices with low environmental impact, including in the field of electrochemical cells. Mass transport limitations can reduce the overall performance of the device by l ...

EPFL2023