Publications related to Single-arm diagnostic electrocardiography with printed graphene on wearable textiles

Related publications (35)

Emg Acquisition and Processing for Hand Movement Decoding on Embedded Systems: State of the Art and Challenges

The electromyography (EMG) signal is particularly useful in monitoring muscle activity, and it can be acquired noninvasively on the skin surface. Thanks to these key characteristics, EMG-based human-machine interfaces (HMIs) for prosthetic myocontrol, as w ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2025

Soft microelectrode arrays for 3D in vitro brain models

Eleonora Martinelli

Neural organoids and spheroids are three-dimensional (3D) in vitro brain models that mimic key aspects of human brain cellular composition, organization, and function. These models have become essential for studying brain development and neurological disor ...

EPFL2025

Framework to engineer existing bridges for sustainability, validated by applications

Eugen Brühwiler

A framework to engineer existing structures, in particular bridges, and novel engineering methods and technologies are presented to extend the service duration of existing bridges while meeting the requirements of modern use. Accurate determination of brid ...

TAYLOR & FRANCIS LTD2025

Implementation of an epicardial implantable MEMS sensor for continuous and real-time postoperative assessment of left ventricular activity in adult minipigs over a short- and long-term period

Silvestro Micera

The sensing of left ventricular (LV) activity is fundamental in the diagnosis and monitoring of cardiovascular health in high-risk patients after cardiac surgery to achieve better short- and long-term outcome. Conventional approaches rely on noninvasive me ...

Aip Publishing2024

Apparatus for non-invasively computing cardio-vasculature parameters using morphology of uncalibrated pressure wave signal

Nikolaos Stergiopoulos, Vasiliki Bikia, Georgios Rovas

Systems and apparatus are provided for using a non-invasively monitored uncalibrated pressure signal from a patient to compute cardiac output and other cardio-vascular parameters, thereby providing safe, effective, reliable and low cost monitoring of patie ...

2024

The role of computational methods in cardiovascular medicine: a narrative review

Alfio Quarteroni, Luca Dede', Christian Vergara, Stefano Pagani

Background and Objective: Computational models of the cardiovascular system allow for a detailed and quantitative investigation of both physiological and pathological conditions, thanks to their ability to combine clinical-possibly patient-specific-data wi ...

Ame Publishing Company2024

Who says you are so sick? An investigation on individual susceptibility to cybersickness triggers using EEG, EGG and ECG

Ronan Boulic, Nana Tian

In this research paper, we conducted a study to investigate the connection between three objective measures: Electrocardiogram(ECG), Electrogastrogram (EGG), and Electroencephalogram (EEG), and individuals' susceptibility to cybersickness. Our primary obje ...

2024

Sub-mm3 dimensional scaling of fully-integrated additively-fabricated microsupercapacitors for embedded energy storage applications

Vivek Subramanian, Amin Hodaei

Microsupercapacitors (MSCs) are attractive energy devices for applications in IoT, wireless sensors, and other microelectronic systems due to their small footprints. In this work, the dimensional scaling of fully-integrated additively-fabricated MSCs is sy ...

Royal Society of Chemistry2024

Electrodeposition of polyaniline on reduced graphene oxide/cotton yarn with tunable electrochemical performance for flexible textile supercapacitors

Dou Du

Graphene/cotton fibers show significant promise in wearable energy storage due to their low cost, porous structure, and exceptional integration ability into wearable systems. However, the eco-unfriendly reductants and standalone electric double-layer capac ...

Elsevier Sci Ltd2024

Additively manufactured stretchable zipping electrostatic actuators

Giulio Grasso

The use of soft and stretchable materials allows the development of adaptive robotic systems and human-machine interfaces that are more natural and comfortable to interact with. One of the application fields that benefits the most from these compliant mate ...

EPFL2024

Electrochemical-repaired porous graphene membranes for precise ion-ion separation

Kumar Varoon Agrawal, Kangning Zhao, Heng-Yu Chi, Kuang-Jung Hsu, Mojtaba Chevalier, Yueqing Shen, Shuqing Song, Zongyao Zhou

The preparation of atom-thick porous lattice hosting & Aring;-scale pores is attractive to achieve a large ion-ion selectivity in combination with a large ion flux. Graphene film is an ideal selective layer for this if high-precision pores can be incorpora ...

Nature Portfolio2024

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

Samaneh Daviran

Abstract The degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these ...

EPFL2024

Whole-heart electromechanical simulations using Latent Neural Ordinary Differential Equations

Alfio Quarteroni, Luca Dede', Francesco Regazzoni

Cardiac digital twins provide a physics and physiology informed framework to deliver personalized medicine. However, high-fidelity multi-scale cardiac models remain a barrier to adoption due to their extensive computational costs. Artificial Intelligence-b ...

Nature Portfolio2024

Highly dispersed nanomaterials in polymer matrix via aerosol-jet-based multi-material 3D printing

Michael James Henry Smith

Polymer-based nanocomposites emerged in the 1960s as a groundbreaking approach to advanced materials. By incorporating robust, durable, and multifunctional nanomaterials into a polymer matrix, the performance of nanocomposites has significantly surpassed t ...

Elsevier2024

Cardiac output estimated from an uncalibrated radial blood pressure waveform: validation in an in-silico-generated population

Nikolaos Stergiopoulos, Vasiliki Bikia, Georgios Rovas

Background: Cardiac output is essential for patient management in critically ill patients. The state-of-the-art for cardiac output monitoring bears limitations that pertain to the invasive nature of the method, high costs, and associated complications. Hen ...

FRONTIERS MEDIA SA2023

Carbon based printed electrodes for DEAs: study of pad, inkjet, and stencil printing

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Armando Matthieu Walter, Simon Holzer

Dielectric elastomer actuators (DEAs) have raised interest due to their remarkable capabilities in various applications, such as soft robotics, haptic feedback systems, and biomedical devices. To harness the full potential of DEAs, the choice of the electr ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Additive Fabrication of Microsupercapacitors

Amin Hodaei

Microsupercapacitors (with footprints from -mm up to -cm scale) have attracted attention for use as electrochemical energy storage devices to power wearables, IoT, and other small microsystems due to their high power density, excellent charge/discharge rev ...

EPFL2023

Organic Memristive Devices with Capacitive-Coupled Effect: A Novel Approach for Histamine Sensing

Sandro Carrara

In this work, we developed simple polymer-based memristive devices specifically designed for biosensing applications. The devices consist of two gold electrodes connected by a biocompatible polymeric resistive layer made of poly(3,4 ethyldioxythiophene)pol ...

Institute of Electrical and Electronics Engineers Inc.2024

Efficient approximation of cardiac mechanics through reduced-order modeling with deep learning-based operator approximation

Alfio Quarteroni, Andrea Manzoni

Reducing the computational time required by high-fidelity, full-order models (FOMs) for the solution of problems in cardiac mechanics is crucial to allow the translation of patient-specific simulations into clinical practice. Indeed, while FOMs, such as th ...

Wiley2023

Functionalized Å-scale Pores in Graphene for Carbon Capture

Kuang-Jung Hsu

Single-layer graphene, hosting a high density of functionalized molecular-sieving atom-thick pores, is considered to be an excellent material for gas separation membranes. These functionalized atom-thick pores enable the shortest transport pathway across t ...

EPFL2024