Dynamic characteristics of bridge superstructures with FRP composite structural elements

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

A key component in developing atrial digital twins (ADT) - virtual representations of patients’ atria — is the accurate prescription of myocardial fibers which are essential for the tissue characterization. Due to the difficulty of reconstructing atrial fi ...

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

This work investigates the integration of Additive Manufacturing (AM) techniques with cellular metamaterials integrated into composite sandwich beam systems. The study proposes an approach that combines composite materials for the face sheets with cellular ...

This paper presents the development and industrial manufacturing of a pultruded high-performance carbon fibre (CF) reinforced polymer (CFRP) composite strip using a bio-based unsaturated polyester (UP) resin containing more than 50% of its weight derived f ...

A novel Ultra High-Performance Fiber Reinforced Concrete (UHPFRC) mix with synthetic fibers and a low clinker matrix, henceforth referred to as PE-UHPFRC, has been developed for structural applications. It exhibits a high tensile elastic limit above 7 MPa, ...

In this work the differences in R-curve response and traction-separation relations due to a finite damage zone or large-scale bridging (LSB) in mode I fracture on double cantilever beams (DCB) were investigated under end opening forces (EOF) and pure momen ...

Textile reinforced concrete (TRC) is a cementitious‐based material where reinforcement consists of high‐strength noncorrosive textile fabrics. Due to the use of a noncorrosive reinforcement, cover requirements can be limited to minimum static values and th ...

Thin-ply composites represent a promising approach to further improve the performance of carbon fibre composite structures thanks to their ability to delay the onset of matrix cracking and delamination up to the point of fibre dominated failure. However, t ...

Composite sandwich panels with reinforcement ribs or webs are being increasingly considered for structural applications in civil engineering. Such panels are prone to creep when subjected to significant permanent loads and therefore the effects of this phe ...

Glass fiber-reinforced polymer (GFRP) pultruded decks and sandwich panels currently represent two of the most extensive applications of FRP materials for load-bearing structural components in the bridge and building domains. Based on the state of the art, ...

Plane reinforced concrete (RC) elements are used in a large variety of structures. Their principal function is to carry forces that act in the plane of the element, but external actions and connections to other structural elements generally introduce addit ...

Energetically weak points in thermally insulated building envelopes are formed by thermal breaks that are implemented to structurally connect external balconies to internal slabs. Current thermal breaks comprise stainless steel bars that penetrate the insu ...

Fracture of carbon fiber reinforced polymers (CFRPs) is dominated by large scale fiber bridging which acts as a very important toughening mechanism. The objective of this paper is to investigate the intralaminar Mode I fracture in a unidirectional CFRP com ...

Fiber Reinforced Composites (FRCs), due to their intrinsic heterogeneity, are generally affected by complex multi-scale failure mechanisms leading to the formation of matrix cracks that are difficult to detect and repair. FRCs with the ability to heal and ...

The application on existing Reinforced Concrete (RC) slabs of cast-on-site Ultra-High Performance Fiber Reinforced cement-based Composite (UHPFRC) layers is an efficient reinforcement technique, currently spreading. The thin layer of UHPFRC, with or withou ...

The concept, design, and experimental validation of the new Avancon Bridge in Bex, Switzerland, are described. The lightweight glass fiber-reinforced polymer (GFRP) sandwich bridge deck adhesively bonded to steel girders, reduced the traffic disruption per ...

The hydrothermal ageing of glass/epoxy interface is investigated using an experimental numerical approach on cylindrical epoxy specimens with centrally located optical fibers. A 24 mm long Bragg grating sensor is inscribed on the optical fiber and used to ...

Current applications of carbon fibre reinforced plastics (CFRP) can be found mostly in sectors where their use is not principally cost-driven and which have limited production volumes, such as aerospace and sports cars. In order to achieve a step-change in ...

This work reports the outcomes of an extensive experimental campaign on the retrofitting of masonry walls by means of carbon fiber reinforced polymer (CFRP) sheets, carried out at University of Applied Sciences (UAS) Fribourg. In the first stage, static-cy ...

Dynamic characteristics of bridge superstructures with FRP composite structural elements

Chat with Graph Search

Defining myocardial fiber bundle architecture in atrial digital twins

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Experimental and numerical investigation of an additively manufactured sandwich composite bridge deck utilizing gyroid building blocks

Pultruded carbon fibre reinforced polymer strips produced with a novel bio-based thermoset polyester for structural strengthening

Capillary flow in UHPFRC with synthetic fibers, under high tensile stresses

Variations on R-curves and traction-separation relations in DCB specimens loaded under end opening forces or pure moments

Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion

Towards aerospace grade thin-ply composites: Effect of ply thickness, fibre, matrix and interlayer toughening on strength and damage tolerance

Creep of Sandwich Panels with Longitudinal Reinforcement Ribs for Civil Engineering Applications: Experiments and Composite Creep Modeling

Local structural effects in fiber-reinforced polymer web-core sandwich structures

Stress fields for the interaction of in-plane and out-of-plane forces in reinforced concrete shell elements

Aramid/glass fiber-reinforced thermal break - thermal and structural performance

Intralaminar fracture of unidirectional carbon/epoxy composite: experimental results and numerical analysis

Self-Healing Fiber-Reinforced Composites with Tailored Supramolecular Matrices

Structural Behavior of R-UHPFRC - RC Composite Slabs

GFRP-Balsa Sandwich Bridge Deck: Concept, Design, and Experimental Validation

Studies of hygrothermal degradation of a single fiber composite: An iterative approach with embedded optical sensors and numerical analysis

Advanced Materials Enabling High-Volume Road Transport Applications of Lightweight Structural Composite Parts

On the Use of CFRP Sheets for the Seismic Retrofitting of Masonry Walls and the Influence of Mechanical Anchorage