Publications related to Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequencies

Related publications (31)

Degradable and Printed Microstrip Line for Chipless Temperature and Humidity Sensing

Danick Briand, Jaemin Kim, James Alec Pierce Bourely

Research on chipless and passive architectures for environmental sensing is generating high interest because they do not require any semiconductor components or batteries to operate, thus resulting in an eco-friendlier footprint. This study demonstrates a ...

2024

Multilayer diffusion-barrier composites based on microfibrillated cellulose from wood, bacterial and algae sources

Aigoul Schreier

This work is driven by the effort towards increased environmental sustainability and aims to develop a new food packaging material based on renewable materials, and more specifically cellulose as the most abundant biomass resource on Earth. Focus was on mi ...

EPFL2024

In-Situ FTIR and Laser Induced Fluorescence RONS Characterization of Atmospheric Pressure Nanosecond-Pulsed Surface DBD Plasma for Indirect Treatments of E. Coli

Ivo Furno, Fabio Avino, Rita Agus, Lorenzo Ibba

We study the bactericidal efficacy of surface dielectric barrier discharge low-temperature plasma treatments, powered by nanosecond high voltage pulses. We achieve similar to 4-log reduction in Escherichia coli population, after 10 min treatments, at a dis ...

Springer2024

Comparison of selected surface level ERA5 variables against in‐situ observations in the continental Arctic

Julia Schmale, Jakob Boyd Pernov

In this study, data from 17 ground-based, continental Arctic observatories areused to evaluate the performance of the European Centre for Medium-RangeWeather Forecasts Reanalysis version 5 (ERA5) reanalysis model. Three aspectsare evaluated: (i) the overal ...

2024

Magnetism of Single Surface Adsorbed Atoms Studied with Radio-Frequency STM

Clément Marie Soulard

This thesis investigates the magnetic properties of single atoms and molecules adsorbed on thin magnesium oxide decoupling layers, grown on a silver single crystal. To address these systems experimentally, we use a low temperature scanning tunneling micros ...

EPFL2024

Implementation of the ISORROPIA-lite aerosol thermodynamics model into the EMAC chemistry climate model (based on MESSy v2.55): implications for aerosol composition and acidity

Athanasios Nenes

This study explores the differences in performance and results by various versions of the ISORROPIA thermodynamic module implemented within the ECHAM/MESSy Atmospheric Chemistry (EMAC) model. Three different versions of the module were used, ISORROPIA II v ...

Copernicus Gesellschaft Mbh2024

The 2024 Magnonics Roadmap

Dirk Grundler, Thomas Yu, Ping Che, Qi Wang

Magnonics is a research field that has gained an increasing interest in both the fundamental and applied sciences in recent years. This field aims to explore and functionalize collective spin excitations in magnetically ordered materials for modern informa ...

2024

Modular Multiplatform Compatible Air Measurement System (MoMuCAMS): a new modular platform for boundary layer aerosol and trace gas vertical measurements in extreme environments

Julia Schmale, Andrea Baccarini, Roman Pohorsky

The Modular Multiplatform Compatible Air Measurement System (MoMuCAMS) is a newly developed in situ aerosol and trace gas measurement platform for lower-atmospheric vertical profiling. MoMuCAMS has been primarily designed to be attached to a Helikite, a ru ...

2024

Squalene Depletion in Skin Following Human Exposure to Ozone under Controlled Chamber Conditions

Shen Yang

A major component of human skin oil is squalene, a highly unsaturated hydrocarbon that protects the skin from atmospheric oxidants. Skin oil, and thus squalene, is continuously replenished on the skin surface. Squalene is also quickly consumed through reac ...

Amer Chemical Soc2024

Temperature, humidity, and ionisation effect of iodine oxoacid nucleation

Andrea Baccarini, Lubna Dada

Iodine oxoacids are recognised for their significant contribution to the formation of new particles in marine and polar atmospheres. Nevertheless, to incorporate the iodine oxoacid nucleation mechanism into global simulations, it is essential to comprehend ...

Royal Soc Chemistry2024

Nanocluster aerosol formation via ozone chemistry on worn clothing: Influence of environmental parameters

Dusan Licina, Shen Yang

Nanocluster aerosols (NCA, particles

Pergamon-Elsevier Science Ltd2024

Characterization of low-temperature plasmas generated by dielectric barrier discharges for bacterial inactivation

Lorenzo Ibba

Low-temperature plasmas (LTPs) at atmospheric pressure hold great promise for disinfection and sterilization applications. When compared to traditional sterilization technologies like autoclaving, LTPs may offer several benefits, including reduced energy c ...

EPFL2024

Stability of influenza A virus in droplets and aerosols is heightened by the presence of commensal respiratory bacteria

Athanasios Nenes, Tamar Kohn, Kalliopi Violaki, Ghislain Gilles Jean-Michel Motos, Aline Laetitia Schaub, Shannon Christa David, Walter Hugentobler, Htet Kyi Wynn, Céline Terrettaz, Laura José Costa Henriques

Aerosol transmission remains a major challenge for control of respiratory viruses, particularly those causing recurrent epidemics, like influenza A virus (IAV). These viruses are rarely expelled alone, but instead are embedded in a consortium of microorgan ...

American Society for Microbiology2024

Co-Adsorption of Alcohols and Water in JUK-8 Studied Using Quasi-Equilibrated Thermodesorption

Pattaraphon Rodlamul

JUK-8 ([Zn(oba)(pip)]n, oba2- = 4,4 '-oxybis(benzenedicarboxylate), pip = 4-pyridyl-functionalized benzene-1,3-dicarbohydrazide) is a hydrolytically stable flexible metal-organic framework. Owing to its unusual adsorptive properties, JUK-8 can be considere ...

MDPI2024

Dataset for "Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequencies"

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Leticia de Sousa

This dataset contains the data collected during the SNSF BRIDGE GREENsPACK project (Grant no. 40B2-0_187223) in association with the recent publication entitled “Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequen ...

Zenodo2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Uncertainty analysis of polymer-based capacitive relative humidity sensor at negative temperatures and low humidity levels

Sandro Carrara, Amar Kapic

Capacitive relative humidity sensors, widely used in industrial and environmental applications, should be interchangeable and ideally have parametrizable response to relative humidity changes. While the effects of temperatures in the range between 0 degree ...

ELSEVIER SCI LTD2023

Temperature and relative humidity in 10 min time resolution measured in the interstitial inlet of the Swiss container during MOSAiC 2019/2020

Julia Schmale, Benjamin Jérémy Laurent Heutte

This dataset contains the temperature and relative humidity in a bypass to the interstitial inlet, measured during the MOSAiC expedition from October 2019 to September 2020. The measurements were performed in the bypass of the interstitial inlet of the Swi ...

Zenodo2023

Temperature and relative humidity in 10 min time resolution measured in the total inlet of the Swiss container during MOSAiC 2019/2020

Julia Schmale, Ivo Fabio Beck, Benjamin Jérémy Laurent Heutte

This dataset contains the temperature and relative humidity in a bypass to the total inlet, measured during the MOSAiC expedition from October 2019 to September 2020. The measurements were performed in the bypass interstitial inlet of the Swiss container o ...

Zenodo2023

Laser-Induced Graphene on Chitosan: An Enabling Technology for Sustainable Resistive Humidity Sensors

Sandro Carrara, Johanna Zikulnig

The development and characterization of resistive humidity sensors based on Chitosan on a glass substrate is reported. The sensor electrodes are made of laser-induced graphene derived from Chitosan, which represents a sustainability advancement by eliminat ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023