Publications related to Embodied Energy and Lifecycle Costs: Questioning (Mis)conceptions about Underground Construction

Related publications (28)

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

Embodied Carbon Premium for Cantilevers

David Michael Volpe Ruggiero, Paola Costanza Miglietta

This study addresses the critical need for sustainable architectural designs within the context of climate change and the significant role the built environment plays in greenhouse gas emissions. The focus of this paper is on understanding the influence of ...

2024

Solar-assisted clean steam generator, a cleaner production approach for sustainable healthcare facilities

Mohammad Jamshidmofid, Fernando Porté Agel

Healthcare sector buildings, particularly hospitals, significantly contribute to global energy consumption and greenhouse gas emissions. Hospitals require a substantial amount of steam, including the essential hygienic or " clean steam, " that is currently ...

Elsevier Sci Ltd2024

An explorative method to support design decisions based on carbon constraints and daylight sufficiency needs

Nazanin Rezaei Oghazi

The global construction industry contributes to 37% of carbon emissions associated to both building operations and construction. To help achieve the net-zero targets set by 2050, it is mandated to achieve a 50% reduction in carbon emissions by 2030. As we ...

EPFL2024

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Beyond the average consumer: Mapping the potential of demand-side management among patterns of appliance usage

Selin Yilmaz, Claudia Rebeca Binder Signer, Matteo Barsanti

To support the decarbonisation of the power sector and offset the volatility of a system with high levels of renewables, there is growing interest in residential Demand-Side Management (DSM) solutions. Traditional DSM strategies require consumers to active ...

2024

Electrical and Optical Manifestations of Flat Band Physics in Van der Waals Materials

Gabriele Pasquale

The scientific progress is significantly transforming contemporary society with the introduction and widespread application of technologies like artificial intelligence and quantum computing. Despite their profound impact, these technologies necessitate en ...

EPFL2024

Osmosis-driven stiffening of structured hydrogels

Esther Amstad, Ran Zhao, Alexandra Thoma

Plant cells harness osmotic pressures to stiffen their leaves through strong turgor pressures. Key to this osmosisdriven stiffening is the confinement of liquids within semipermeable membranes that can regulate the transport of water molecules and ions. In ...

Elsevier2024

Is the powersave governor really saving power?

David Atienza Alonso, Darong Huang, Luis Maria Costero Valero

A frequency scaling governor is critical for the performance management of cloud servers, as it enhances energy efficiency and helps to control operational temperatures, thereby ensuring system reliability. However, our in-depth analysis of the application ...

2024

A COMPREHENSIVE FRAMEWORK TO INCREASE MODELLING CREDIBILITY IN MODERN BUILDINGS ENERGY SIMULATIONS. THE CASE STUDY OF CHAUDERON COMPLEX FAÇADES BY JEAN PROUVÉ IN LAUSANNE (1969-1974)

Franz Graf, Giulia Marino, Giuseppe Galbiati

The urgent need to retrofit the existing building stock is a well-known theme, abundantly dealt with in the scientific literature. Thermal simulations have a key role, assessing the effective energy performance of buildings. At the same time, researchers f ...

Docomomo2024

RE:SLAB — a load bearing system for open-ended component reuse in building structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Dario Redaelli, Alex-Manuel Muresan, Edisson Xavier Estrella Arcos

The construction industry plays a major role in the high levels of greenhouse gas emissions, resource consumption, and waste generation observed nowadays. Key to the circular economy, structural component reuse arises as a promising solution to divert cons ...

2024

FLO:RE – A new floor system made of reused reinforced concrete and steel elements

Corentin Jean Dominique Fivet, Numa Joy Bertola, Maléna Bastien Masse, Célia Marine Küpfer

Carefully extracting reinforced concrete (RC) elements from soon-to-be demolished structures and reusing them as load-bearing components is an emerging circular low-carbon alternative to building new structures. As floor construction typically accounts for ...

IABSE2024

Preserving suspended structures with light façades (1960-1980). Architectural study and retrofitting proposals

Giuseppe Galbiati

Nowadays, the energy efficiency of the existing building stock is internationally accepted as a topical issue. Energy retrofitting is encouraged, improving the thermal performances of buildings, but often altering the historical image of our cities. Attent ...

EPFL2023

Endogenous Energy Efficiency Improvement in Housing and Cement Sectors in Switzerland

Sergey Arzoyan

The reduction of energy consumption in the residential building stock and cement industry is a substantial component of the Swiss Energy Strategy 2050. Therefore, it is vital to identify the potential for EEI in these two sectors. In this study, a new meth ...

EPFL2023

Building ventilation and outdoor air pollution: Implications for health, comfort and energy

Evangelos Belias

As humans spend most of their time indoors, indoor air quality (IAQ) significantly impacts their health. In parallel, building ventilation consumes significant energy, contributing to climate change. However, the relationships between the building ventilat ...

EPFL2023

OccuVAE: Integrating unsupervised occupancy inference in data-driven energy modeling for human-centric operation

Andrew James Sonta, Yufei Zhang

Data-driven building energy modeling is an emerging solution to facilitate the implementation of energy-flexible buildings. However, its black-box nature hinders interpretation, including with respect to human-building interaction. This drawback may bring ...

Association for Computing Machinery2023

Electrification and digitalization effects on sectoral energy demand and consumption: A prospective study towards 2050

François Maréchal, Xiang Li, Dorsan Alexis A. Lepour, Fabian Heymann

Energy transition is blurring the boundaries between the demand and supply sides with growing participation of prosumer resources. The intensifying pace of electrification and digitalization during the past decade tends to continue, leading to potential te ...

PERGAMON-ELSEVIER SCIENCE LTD2023

ROSMOSE: A Web-based Optimization Tool to Aid Decision-making for the Design and Operation of Industrial and Urban Energy Systems

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Cédric Terrier, Michel Lopez

Energy efficiency is crucial for the sustainable operation of all industrial and urban sectors. However, practicing engineers have seldom access to open-source tools that can readily evaluate and compare scenarios in terms of energy consumption, cost, and ...

2023

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

A modelling framework for modern heritage buildings energy simulation

Franz Graf, Giulia Marino, Giuseppe Galbiati

The latest European polices highlight the urgent need to rehabilitate the existing building stock, responsible for 40 % of the EU's total energy consumption. In this process, a key role is played by thermal simulations, assessing the effective energy perfo ...

Elsevier2023