Publications related to Inexpensive and fast wafer-scale fabrication of nanohole arrays in thin gold ﬁlms for plasmonics

Related publications (31)

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Stencil-Based Selective Surface Functionalization of Silicon Nanowires in 3D Device Architectures for Next-Generation Biochemical Sensors

Yusuf Leblebici

Surface functionalization of 1D materials such as silicon nanowires is a critical preparation technology for biochemical sensing. However, existing nonselective functionalization techniques result in nonlocal binding and contamination, with potential devic ...

Amer Chemical Soc2024

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Johann Emmeram Riemensberger, Mikhail Churaev, Xinru Ji, Zihan Li, Terence Albert Emile Blésin, Chengli Wang, Junyin Zhang, Xi Wang, Chen Yang, Wil Kao, Alisa Davydova

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxi ...

2024

Integrated silicon photonic MEMS

Niels Quack, Alain Yuji Takabayashi, Hamed Sattari

Silicon photonics has emerged as a mature technology that is expected to play a key role in critical emerging applications, including very high data rate optical communications, distance sensing for autonomous vehicles, photonic-accelerated computing, and ...

SPRINGERNATURE2023

Dynamic control of high-voltage actuator arrays by light-pattern projection on photoconductive switches

Herbert Shea, Amir Firouzeh, Edouard Franck Vincent Gustave Leroy

The ability to control high-voltage actuator arrays relies, to date, on expensive microelectronic processes or on individual wiring of each actuator to a single off-chip high-voltage switch. Here we present an alternative approach that uses on-chip photoco ...

SPRINGERNATURE2023

High density lithium niobate photonic integrated circuits

Tobias Kippenberg, Rui Ning Wang, Johann Emmeram Riemensberger, Anat Siddharth, Mikhail Churaev, Nikolai Kuznetsov, Zihan Li, Junyin Zhang, Zelin Tan

Photonic integrated circuits have the potential to pervade into multiple applications traditionally limited to bulk optics. Of particular interest for new applications are ferroelectrics such as Lithium Niobate, which exhibit a large Pockels effect, but ar ...

Nature Portfolio2023

Digital manufacturing of personalised footwear with embedded sensors

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim, Ryan Mitchell van Dommelen

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

Nature Research2023

Enablers for Overcurrent Capability of Silicon-Carbide-Based Power Converters: An Overview

Elison de Nazareth Matioli

With the increase in penetration of power electronic converters in the power systems, a demand for overcurrent/ overloading capability has risen for the fault clearance duration. This article gives an overview of the limiting factors and the recent technol ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Light-Driven Thermo-Optical Effects in Nanoresonator Arrays

Alfredo Angelo Luigi Naef, Giulia Tagliabue, Theodoros Tsoulos, Ershad Mohammadi

Thermonanophotonics, that is the study of photothermal effects in optical nanoantennas, has recently attracted growing interest. In particular, going beyond thermoplasmonic designs, thermo-optical modulation of dielectric nanoantennas opens new opportuniti ...

WILEY-V C H VERLAG GMBH2023

Electronic metadevices for terahertz applications

Elison de Nazareth Matioli, Mohammad Samizadeh Nikooytabalvandani

The evolution of electronics has largely relied on downscaling to meet the continuous needs for faster and highly integrated devices(1). As the channel length is reduced, however, classic electronic devices face fundamental issues that hinder exploiting ma ...

NATURE PORTFOLIO2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Ambrine Douhane, Marcus Cemes, Duccio Testa

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Optical manipulation of plasmonic nanoparticles: Applications in surface chemistry and nano-optics

Jeonghyeon Kim

Optical tweezers are devices that can manipulate nano- and microparticles using a laser. The principle of optical tweezers is to apply a force to an object using the momentum of light. This force is very small, but it is sufficient to move things in the mi ...

EPFL2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

Thermal motion of a room-temperature mechanical resonator typically dominates the quantum backaction of its position measurement. This is a longstanding barrier for exploring cavity optomechanics at room temperature. In order to enter the quantum regime of ...

EPFL2022

Micro 3D printing of a functional MEMS accelerometer

Luis Guillermo Villanueva Torrijo, Damien Maillard

Microelectromechanical system (MEMS) devices, such as accelerometers, are widely used across industries, including the automotive, consumer electronics, and medical industries. MEMS are efficiently produced at very high volumes using large-scale semiconduc ...

SPRINGERNATURE2022

Demonstrating and Unraveling a Controlled Nanometer-Scale Expansion of the Vacancy Defects in Graphene by CO2

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra, Kuang-Jung Hsu, Mojtaba Chevalier

A controlled manipulation of graphene edges and vacancies is desired for molecular separation, sensing and electronics applications. Unfortunately, available etching methods always lead to vacancy nucleation making it challenging to control etching. Herein ...

Wiley-VCH Verlag GmbH2022

Silicon photonic microelectromechanical systems add-drop ring resonator in a foundry process

Niels Quack, Alain Yuji Takabayashi, Hamed Sattari

Photonic add-drop filters are crucial components for the implementation of wavelength division multiplexing (WDM) in fiber-optic communication systems. The recent progress in photonic integration has shown the potential to integrate photonic add-drop filte ...

SPIE-SOC PHOTO-OPTICAL INSTRUMENTATION ENGINEERS2022