Publications related to Interaction between a surface dielectric barrier discharge and transonic airflows

Related publications (36)

Flow cytometry study of Escherichia coli treated with plasma-activated water: confirming the absence of the viable but non-culturable state in bacteria

Ivo Furno, Fabio Avino, Rita Agus, Brayden Graham Myers, Aleksandra Lavrikova

Plasma-activated water (PAW) is an emerging antimicrobial agent with promising applications in bacterial inactivation. The PAW samples are generated by non-contact exposure of deionized water to a surface dielectric barrier discharge plasma and are charact ...

Frontiers Media SA2025

Plasma-activated water retains antimicrobial properties against Escherichia coli after 72 h of storage

Laurens Joachim Balthazar Pipoz, Ivo Furno, Fabio Avino, Rita Agus, Brayden Graham Myers, Aleksandra Lavrikova

Plasma-activated water (PAW) is increasingly recognized for its bactericidal properties. To advance this technology toward practical applications and deepen the understanding of its mechanisms, it is crucial to study the storage stability of PAW, focusing ...

IOP Publishing Ltd2025

Investigating the effects of plasma-activated water on E. coli with the novel application of single-cell impedance flow cytometry

Ivo Furno, Fabio Avino, Rita Agus, Brayden Graham Myers

Single-cell impedance flow cytometry (IFC) is a rapid, label-free diagnostic capable of resolving the dielectric properties of individual cells. Here, single-cell IFC is employed to investigate the effects of plasma-activated water (PAW) on E. coli. This d ...

Springer Science and Business Media LLC2025

ECOSURF SA-9: A Biodegradable Alternative to Triton X-100 for Tissue Phantoms

Anja Skrivervik, Sujith Raman, Adrián Fernández Carnicero

Tissue phantoms are materials designed to mimic the dielectric properties of biological tissues. This work proposes eco-friendly tissue phantoms of cartilage, cerebrospinal fluid and stomach in the frequency range between 0.4 and 6 GHz. For reaching this p ...

Institute of Electrical and Electronics Engineers2025

Heat transfer in the entrance region of annular laminar flow with constant and different heat flux on two walls

Yasemen Kuddusi

Heat transfer differs in the regions where the flow is developed and developing thermally. These regions can be differentiated by using the thermal entry length. Many researchers have presented correlations to determine the thermal entry length for natural ...

WILEY-V C H VERLAG GMBH2025

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi, Helena Luisa Teixido Pedarros

We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow ra ...

2023

Breakdown development in a nanosecond pulsed dielectric barrier discharge in humid air in plane-to-plane geometry

Ivo Furno, Xin Yang, Lorenzo Ibba

We used the ns electric field induced second harmonic (EFISH) generation diagnostic to measure the electric field evolution in a 200 ns pulse, dielectric barrier, plane-to-plane discharge in humid air, on the time scale shorter than the laser pulse duratio ...

Iop Publishing Ltd2023

The effects of kinematics, flexibility, and planform on the vortex formation and aerodynamic performance of flapping wing flight

Alexander Gehrke

In this thesis, the aerodynamic challenges in flapping wing flight are addressed. In particular, the effects of different wing kinematics, flexibilities, and planforms on the the leading edge vortex development and aerodynamic performance are investigated. ...

EPFL2023

Beam homogeneity of caesium seeded SPIDER using a direct beamlet current measurement

Basile Marie Jacques Pouradier Duteil

The ITER Heating Neutral Beam (HNB) source prototype SPIDER (Source for the Production of Ions of Deuterium Extracted from a Radio frequency plasma), hosted at the Neutral Beam Test Facility (NBTF) in Padova, Italy, has recently started operating with evap ...

ELSEVIER SCIENCE SA2023

Inversing the actuation cycle of dielectric elastomer actuators for a facial prosthesis

Yves Perriard, Yoan René Cyrille Civet, Paolo Germano, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Alexis Boegli, Quentin Philippe Mario De Menech

Dielectric Elastomer Actuators (DEAs) are a type of smart material described as compliant capacitors. They show impressive performances as soft actuators, such as a high strain and fast response. Nonetheless, replicating natural muscle function with DEAs h ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Three-dimensional micro-CT images of UV-frozen flow fronts recorded at different flow regimes

Véronique Michaud, Jacobus Gerardus Rudolph Staal

Segmented micro-CT images of flow fronts produced by UV-flow freezing. Front morphologies correspond to capilary-dominated, equilibrated and viscous-dominated flow regimes. ...

Zenodo2023

Characterization of low-temperature plasmas generated by dielectric barrier discharges for bacterial inactivation

Lorenzo Ibba

Low-temperature plasmas (LTPs) at atmospheric pressure hold great promise for disinfection and sterilization applications. When compared to traditional sterilization technologies like autoclaving, LTPs may offer several benefits, including reduced energy c ...

EPFL2024

DEMO toroidal field coil fast discharge unit integration studies

Roberto Guarino

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

Numerical analysis of apparatus-induced dispersion for density-dependent solute transport in porous media

David Andrew Barry, Hong Zhang

The effects of apparatus-induced dispersion on nonuniform, density-dependent flow in a cylindrical soil column were investigated using a finite-element model. To validate the model, the results with an analytical solution and laboratory column test data we ...

2023

Ageing-aware battery discharge prediction with deep learning

Olga Fink, Luca Biggio

Electrochemical batteries are ubiquitous devices in our society. When employed in mission-critical applications, the ability to precisely predict their end-of-discharge under highly variable operating conditions is of paramount importance in order to suppo ...

ELSEVIER SCI LTD2023

Noise-induced transitions past the onset of a steady symmetry-breaking bifurcation: The case of the sudden expansion

François Gallaire, Edouard Boujo, Yves-Marie François Ducimetière

We consider fluid flows, governed by the Navier-Stokes equations, subject to a steady symmetry-breaking bifurcation and forced by a weak noise acting on a slow timescale. By generalizing the multiple-scale weakly nonlinear expansion technique employed in t ...

2024

Drag reduction of flexible disks through vortex ring manipulation

Mrudhula Baskaran

Extreme weather events are increasing in frequency in recent years due to global climate change. These events damage infrastructure and pose an open challenge to engineers to design more weather-resistant infrastructure. As engineers, we turn to nature fo ...

EPFL2024

Dynamic pulse scheduling in ASDEX Upgrade: Disruption avoidance and investigation of the H-Mode density limit

Alessandro Pau, Federico Alberto Alfredo Felici

Operation of a tokamak device requires the coordinated operation of a multitude of systems. The sequence of operations during a discharge is both too complex and fast for human interaction. A common way of operation is a predefined sequence of operations w ...

2023

Enhancing Wind Farm Performance through Axial Induction and Tilt Control: Insights from Wind Tunnel Experiments

Fernando Porté Agel, Guillem Armengol Barcos

Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...

MDPI2024