Publications related to Shunt loudspeaker techniques for use as liners for engine nacelles

Related publications (32)

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Pyroresistive response of percolating conductive polymer composites

Claudio Grimaldi

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Zhiyuan Xie, Christophe Marcel Georges Galland, Wen Chen, Sakthi Priya Amirtharaj, Konstantin Malchow

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

Thermal sensing device and sensory feedback system and method using such thermal sensing device

Silvestro Micera, Solaiman Shokur, Outman Akouissi, Jonathan Louis Muheim

The present invention concerns a thermal sensing device (1) and a sensory feedback system and method using such thermal sensing device, comprising at least one film (19) of electrically insulating polymer defining a global surface of the thermal sensing de ...

2024

Tension-tension fatigue behavior of basalt composite hybrid joints

Thomas Keller, Lulu Liu

The tension–tension fatigue behavior of pseudo-ductile hybrid bonded-bolted double lap basalt composite joints, composed of pseudo-ductile adhesives and adherends with multi-directional fiber architecture, was experimentally investigated. The fatigue damag ...

2024

A Front-End CMOS Interface Circuit With High Voltage Charge Pump and Oscillator for Capacitive Micromachined Ultrasonic Transducers

Sandro Carrara, Gian Luca Barbruni, Yihe Zhao

Label-free biosensors, combined with miniaturized micro-electromechanical sensory platforms, offer an attractive solution for real-time and facile monitoring of biomolecules due to their high sensitivity and selectivity without the need for specifically la ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Amorphous Silicon Based Microchannel Plates for Time-of-Flight Positron Emission Tomography

Samira Alexandra Frey

Microchannel plates fabricated from hydrogenated amorphous silicon (AMCPs) are a promising alternative to conventional lead glass microchannel plates. Their main advantages lie in their cheaper and more flexible fabrication processes, allowing for adaptabl ...

EPFL2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

Tuning the inductance of Josephson junction arrays without SQUIDs

Vladimir Manucharyan

It is customary to use arrays of superconducting quantum interference devices (SQUIDs) for implementing magnetic field-tunable inductors. Here, we demonstrate an equivalent tunability in a (SQUID-free) array of single Al/AlOx/Al Josephson tunnel junctions. ...

2023

Multiphysics model for assessing photoelectrochemical phenomena under concentrated irradiation

Sophia Haussener, Isaac Thomas Holmes-Gentle, Franky Esteban Bedoya Lora

A multiphysics model was developed for a photoelectrochemical (PEC) cell at the device level to simulate water splitting operating under concentrated irradiation (between 50 to 600 kW m−2). The 2D model couples charge, heat, mass, photon, and momentum tran ...

2023

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...

EPFL2024

A Capacitively-Coupled Chopper Instrumentation Amplifier for Implantable Bridge Sensor Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents an energy and area efficient capacitively-coupled chopper instrumentation amplifier (CCIA) dedicated to implantable bridge sensor systems. Chopper stabilization is employed to decrease its offset and 1/f noise and the resulting ripple d ...

IEEE2022

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Marco Mattavelli, Catherine Dehollain, Franco Maloberti, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) designed for implantable pressure sensing systems. The circuit provides the measure of the pulmonary artery pressure that is particularly releva ...

2022

Plasma-based Electroacoustic Actuator for Broadband Sound Absorption

Stanislav Sergeev

Environmental noise, mostly related to human activities, has an immense impact on public health. The development of noise reduction technologies is paramount in addressing this problem. Because of practical and economic reasons, a compact, broadband, light ...

EPFL2022

Intergrade Joints for Nb3Sn cables of high magnetic field magnets

Vincenzo D'Auria

The objective of this thesis is the development of high-field and high-current joints between Nb3Sn cables for superconducting coils. The main fields of application are high energy physics (HEP) and thermonuclear fusion. In this thesis, the focus is on Win ...

EPFL2022

Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb3Sn Cables

Pierluigi Bruzzone, Vincenzo D'Auria

This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the spray ...

MDPI2022

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

IEEE Institute of Electrical and Electronics Engineers2022

Multiobjective Vector Modulation for Improved Control of NPC-Based Multi-Source Inverters in Hybrid Traction Systems

Andrea Cervone

The concept of a multi-source inverter (MSI) based on NPC topology was recently introduced for hybrid-electric powertrains to connect several dc sources to the traction load in a single conversion stage without magnetics. This work proposes a new modulatio ...

2022

Portable Multi-Frequency Impedance-Sensing Device for Bacteria Classification in a Flowing Liquid

Sandro Carrara

This paper presents a novel impedance-sensing device and its related microfluidics system developed to characterize the macroscopical properties of bacteria and microparticles. The system is based on a phase-sensitive detector with square-waves excitation ...

IEEE2022

The Application of Fuel-Cell and Battery Technologies in Unmanned Aerial Vehicles (UAVs): A Dynamic Study

Jan Van Herle, Hossein Pourrahmani

The harmful impacts of fossil-fuel-based engines on the environment have resulted in the development of other alternatives for different types of vehicles. Currently, batteries and fuel cells are being used in the automotive industry, while promising progr ...

MDPI2022