Publications related to Redefining Energy Density for an uniaxial Dielectric Elastomer Actuator

Related publications (36)

Design and Characterization of an Equibiaxial Multi-Electrode Dielectric Elastomer Actuator

Yves Perriard, Yoan René Cyrille Civet, Stefania Maria Aliki Konstantinidi, Bhawnath Tiwari, Simon Holzer

With the ongoing journey of automation advancements and a trend towards miniaturization, the choice of actuator plays a crucial role. Over recent years, soft actuators have demonstrated their usefulness in various applications, especially where light weigh ...

MDPI AG2025

SUTBot: A Soft Umbrella-like Tensegrity Robot with Elastic Struts for In-pipe Locomotion

Rui Wu

Compared with traditional in-pipe robots, tensegrity robots have exhibited many advantages such as light-weight, compliant, collapsible, low-cost, and rapidly manufacturable characteristics. However, published tensegrity in-pipe robots still have limited l ...

2025

Design of robotic physical intelligence

Francesco Stella

Bridging the performance gap between robotics and biological systems demands significant advancements across multiple domains, including mechanical design, control theory, modeling, and artificial intelligence. In this thesis, I will introduce innovative m ...

EPFL2025

An augmented reality-based wearable system for handheld-free and intuitive robot programming

Junsoo Kim

Industrial robots have been programmed to optimize mass production by executing predefined trajectories with their high speed, precision, and repeatability over long production cycles. However, the rise of Industry 4.0 and the increasing demand for diverse ...

2025

Multi-Scale Study of High-Temperature Latent Heat Storage With Metallic Phase Change Materials

Nithin Mallya

Energy storage is a central issue in the green economy with half the global end energy usage being heat. Latent heat thermal energy storage (LHTES) provides an energy dense heat storage solution with a well-defined discharge temperature. Utilizing low-cost ...

EPFL2022

High Permittivity Siloxanes as Promising Materials for Dielectric Elastomer Transducers: From Synthesis to Application

Yauhen Sheima

The speed of change in the modern world is impressive. Within the last 50 years, many devices and technologies have significantly transformed their appearance, intrinsic characteristics and improved their performance. Computers have changed from the size o ...

EPFL2022

SnSb binary alloy induced heterogeneous nucleation within the confined nanospace: Toward dendrite-free, flexible and energy/power dense sodium metal batteries

Dou Du

Rechargeable sodium (Na) metal batteries (SMBs) provide an alternative energy-dense, low-cost energy storage system beyond prevailing Li-ion technologies. However, their practical deployment requires the performance evaluation of Na anodes on the device le ...

ELSEVIER2021

Carbon-Decorated Na3V2(PO4)(3) as Ultralong Lifespan Cathodes for High-Energy-Density Symmetric Sodium-Ion Batteries

Kangning Zhao

In this work, several carbon-decorated Na3V2(PO4)(3) materials (NVP@C-750/800/850) are successfully fabricated using a solgel approach and subsequent heat treatment. When NVP@C-800 is used as a cathode, it shows an ultralong cycle life (2000 cycles) at a h ...

AMER CHEMICAL SOC2021

Enhanced-DAB Converter: Comprehensive Design Evaluation

Elison de Nazareth Matioli, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani

Soft switching in dual-active-bridge (DAB) converters enables their efficient operation at high frequencies, where the reduction in the size of magnetic components could result in ultra-high power densities. Nonetheless, losing soft-switching at high frequ ...

IEEE2021

Efficient implementation of atom-density representations

Michele Ceriotti, Till Junge, Félix Benedito Clément Musil, Michael John Willatt, Guillaume André Jean Fraux, Max David Veit, Alexander Jan Goscinski

Physically motivated and mathematically robust atom-centered representations of molecular structures are key to the success of modern atomistic machine learning. They lie at the foundation of a wide range of methods to predict the properties of both materi ...

2021

A Minimum-Jerk Approach to Handle Singularities in Virtual Fixtures

Sylvain Calinon

Implementing virtual fixtures in guiding tasks constrains the movement of the robot's end effector to specific curves within its workspace. However, incorporating guiding frameworks may encounter discontinuities when optimizing the reference target positio ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2024

Reinforced polypyrrole with 2D graphene flakes decorated with interconnected nickel-tungsten metal oxide complex toward superiorly stable supercapacitor

Ulf Anders Hagfeldt

Prompt development of electronic devices and sensors raised the requirement for design/fabrication of advanced energy sources capable of providing considerable amount of energy for consuming platforms through practical nanotechnological approaches. For thi ...

ELSEVIER SCIENCE SA2021

Spatiotemporal energy‐density distribution of time‐reversed electromagnetic fields

Farhad Rachidi-Haeri, Marcos Rubinstein, Nicolas Mora Parra, Hamidreza Karami, Elias Per Joachim Le Boudec

Time reversal exploits the invariance of electromagnetic wave propagation in reciprocal and lossless media to localize radiating sources. Time-reversed measurements are back-propagated in a simulated domain and converge to the unknown source location. The ...

2024

Design guidelines for Al-12%Si latent heat storage encapsulations to optimize performance and mitigate degradation

Sophia Haussener, Selmar Rudolf Binder

We provide detailed insight into the growth kinetics of intermetallic layers formed at the interface of molten Al-12%Si with cylindrical encapsulations of 316L stainless steel. This knowledge is relevant for the design and operation of high-temperature lat ...

ELSEVIER2020

Reversible solid-oxide cell stack based power-to-x-to-power systems: Comparison of thermodynamic performance

François Maréchal, Jan Van Herle, Ligang Wang, Tzu-En Lin, Philippe Aubin, Maria del Mar Perez Fortes, Yumeng Zhang

The increasing penetration of variable renewable energies poses new challenges for grid management. The economic feasibility of grid-balancing plants may be limited by low annual operating hours if they work either only for power generation or only for pow ...

2020

Manufacturing and Tests of a Tubular Multilayer Dielectric Elastomer Actuator for an Impedance Pump

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Jonathan André Jean-Marie Chavanne, Armando Matthieu Walter, Francesco Clavica, David Moser

During the last three decades, the field of electro active polymers (EAP) has seen a rapidly growing interest worldwide. These materials can exhibit many advantages, such as elasticity, high energy density, high dynamics and are often nicknamed artificial ...

2020

Learning the electronic density of states in condensed matter

Michele Ceriotti, Andrea Anelli, Chiheb Ben Mahmoud

The electronic density of states (DOS) quantifies the distribution of the energy levels that can be occupied by electrons in a quasiparticle picture and is central to modern electronic structure theory. It also underpins the computation and interpretation ...

AMER PHYSICAL SOC2020

Modeling, understanding, and screening fast lithium-ion conductors for solid-state electrolytes

Leonid Kahle

The Li-ion batteries within the consumer electronics used in our everyday life suffer from well-known deficiencies due to the prevalent use of organic liquid electrolytes: the narrow electrochemical stability windows of the organic solvents used in these e ...

EPFL2019

Integration of solid oxide fuel cells in cruise ship energy systems

François Maréchal, Ligang Wang, Francesco Baldi

The growing trend of the cruise ship industry, together with increasing concerns over its impact on the environment, makes these ships a much relevant target for the efforts toward increasing ship energy efficiency, thus ultimately reducing fuel consumptio ...

2018

The neuromechanics of animal locomotion: From biology to robotics and back

Auke Ijspeert, Pavan P Ramdya

Robotics and neuroscience are sister disciplines that both aim to understand how agile, efficient, and robust locomotion can be achieved in autonomous agents. Robotics has already benefitted from neuromechanical principles discovered by investigating anima ...

AMER ASSOC ADVANCEMENT SCIENCE2023