Publications related to Characterization of crystallographically etched single crystal diamond diffraction gratings

Related publications (47)

Granular Avalanche Impact on a Structure using DEM and FEM

Mountain regions face a variety of natural hazards that menace infrastructure and the people living in these areas. Human activity in these areas is intensifying, making hazard analysis and risk mitigation critical. Switzerland, with its densely populated ...

2025

What do we talk about, when we talk about single-crystal termination-dependent selectivity of Cu electrocatalysts for CO2 reduction? A data-driven retrospective

Kevin Rossi

We mine from the literature experimental data on the CO2 electrochemical reduction selectivity of Cu single crystal surfaces. We then probe the accuracy of a machine learning model trained to predict faradaic efficiencies for 11 CO2 reduction reaction prod ...

ROYAL SOC CHEMISTRY2023

Domain Imaging and Switching Dynamics in BaTiO3-Based Photonic Integrated Devices

Jacqueline Geler Kremer

Keeping up with our constantly connected lifestyle of instant messages and video streaming has its repercussions. Data centers have been gobbling up resources becoming a significant share of the energy used worldwide. To keep up with demand and curb the en ...

EPFL2023

Selectively permeable microcapsules

Chuen-Ru Li

Microcapsules are appealing containers for delivering active ingredients, such as drugs and cosmetics, or conducting chemical and biological reactions on a small scale. To control the timing and location of release of these encapsulants, the shells of micr ...

EPFL2023

Sub-kHz-Linewidth External-Cavity Laser (ECL) With Si3N4 Resonator Used as a Tunable Pump for a Kerr Frequency Comb

Tobias Kippenberg, Junqiu Liu

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. Exter ...

IEEE Institute of Electrical and Electronics Engineers2023

Simulation and Fabrication of Monolithic III-V Photodetectors on Si: The Role of Growth Facets and Localization of Heterojunctions

Kirsten Emilie Moselund, Simone Iadanza

In this work, we provide important parameters to take into account when fabricating in-plane III-V photodetectors (PDs) integrated on silicon (Si) using template-assisted selective epitaxy (TASE). Their performance has previously been demonstrated, and her ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2024

Pressure-freezing of dodecane: exploring the crystal structures, formation kinetics and phase diagrams for colossal barocaloric effects in n-alkanes

Tomasz Poreba

Barocaloric (BC) materials provide cheaper and more energy efficient alternatives to traditional refrigerants. Some liquid alkanes were recently shown to exhibit a colossal BC effect, matching the entropy changes in commercial vapour-liquid refrigerants. D ...

Royal Soc Chemistry2023

All-Dielectric Nanophotonic via Glass Fluid Instabilities

Pierre-Luc Eloi Piveteau

In this thesis work, we propose to exploit an innovative micro/nano-fabrication process, based on controlled fluid instabilities of a thin viscous film of chalcogenide glass. Amorphous selenium and arsenic triselenide were used in this thesis work, and com ...

EPFL2024

An elementary treatment on the diffraction of crystalline structures

Gervais Chapuis

Although W. L. Bragg's law can be easily derived for beginners in the field of crystallography, its interpretation however seems to cause some difficulties which lies essentially in the relation between the concept of lattice planes and the unit cell const ...

2022

Nanoscale Mapping of Light Emission in Nanospade-Based InGaAs Quantum Wells Integrated on Si(100): Implications for Dual Light-Emitting Devices

Anna Fontcuberta i Morral, Wonjong Kim, Jean-Baptiste Leran, Nicolas Tappy, Didem Dede, Nicholas Paul Morgan, Valerio Piazza, Akshay Balgarkashi, Raphaël François Lemerle

III-V semiconductors outperform Si in many optoelectronics applications due to their high carrier mobility, efficient light emission and absorption processes, and the possibility to engineer their band gap through alloying. However, complementing Si techno ...

2022

3D diffractive optics for linear interconnects and nonlinear processing

Niyazi Ulas Dinç

The optical domain presents potential avenues for enhancing both computing and communication due to its inherent properties of bandwidth, parallelism, and energy efficiency. This research focuses on harnessing 3-Dimensional (3D) diffractive optics for nove ...

EPFL2024

Advanced Modeling and Simulation of Luminescence Phenomena in Perovskite Semiconductors

Simon Jérôme Zeder

The utilization of MHPs in optoelectronics has surged over the past decade due to their favorable properties such as direct band gaps, a large JDOS near the band edge resulting in strong optical absorption, and high defect tolerance allowing operation clos ...

EPFL2024

Facet Engineering for Stable, Efficient Perovskite Solar Cells

Michael Graetzel

Facet engineering is an important strategy for tuning the physical, chemical, and electronic properties of a crystal surface, and it also provides an effective route to improve the device performance in many fields. Complex crystal structures with rough mo ...

AMER CHEMICAL SOC2022

The Electronic-Structure Genome of Inorganic Crystals

Junfeng Qiao

Electronic structure theory plays a central role in understanding properties of crystalline materials. Among all the ab initio methods, density functional theory (DFT) is the most popular choice due to its balance between accuracy and computational cost, a ...

EPFL2024

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

Thermal motion of a room-temperature mechanical resonator typically dominates the quantum backaction of its position measurement. This is a longstanding barrier for exploring cavity optomechanics at room temperature. In order to enter the quantum regime of ...

EPFL2022

Quantitative prediction of crystallization in laser powder bed fusion of a Zr-based bulk metallic glass with high oxygen content

Roland Logé, Jamasp Jhabvala, Navid Sohrabi, Hossein Ghasemi Tabasi, Toni Ivas

One of the main challenges in the fabrication of bulk metallic glasses (BMGs) via laser-based additive manufacturing (AM) is undesirable crystal phase formation, which usually deteriorates the mechanical properties of the BMG fabricated parts. Understandin ...

Elsevier Sci Ltd2024

Transfer of Graphene under Ultra-High Vacuum

Darius Constantin Merk

This thesis reports on a novel method for graphene transfer that is fully UHV compatible, which has remained a challenge for a long time due to the necessity of supporting graphene for transfer and most often requiring supporting layer removal post-transfe ...

EPFL2022

Wandering principal optical axes in van der Waals triclinic materials

Arslan Mazitov

Nature is abundant in material platforms with anisotropic permittivities arising from symmetry reduction that feature a variety of extraordinary optical effects. Principal optical axes are essential characteristics for these effects that define light-matte ...

Nature Portfolio2024

Narrowband Optical Coupler Using Fano Interference in First Order Diffraction

Olivier Martin, Benjamin Gallinet, Giorgio Quaranta, Fabian Michael Lütolf

Light coupling in waveguides has been extensively investigated in a variety of contexts, from photonic integrated circuits to biosensing and near-eye displays for augmented reality. Here, narrowband diffraction is reported using a Fano interference effect ...

AMER CHEMICAL SOC2021

Melting Curve of Black Phosphorus: Evidence for a Solid-Liquid-Liquid Triple Point

Tomasz Poreba

Black phosphorus (bP) is a crystalline material that can be seen as an ordered stacking of two-dimensional layers, which results in outstanding anisotropic physical properties. The knowledge of its pressure (P)-temperature (T) phase diagram, and in particu ...

AMER CHEMICAL SOC2024